Set-up menu
GALA
As the driving speed increases, the sound
level rises in the vehicle. With the aid of
the GALA function (speed-dependant
volume adjustment) the volume of the car
radio becomes louder as the speed
increases. The extent of the rise in vol-
ume can be selected by setting from 1to
9. If set to NO, the GALA function is
turned OFF.
• Select GALAin the menu. "GALA" is
shown in the display with the current
value.
• Use the turning knob to set the de-
sired value from NO to 9.
• By briefly pressing the TPbutton or
the control button , you can store
the indicated value and go to the next
menu point
or
• by depressing the TPbutton for a few
moments, you can leave the set-up
menu without storing the change.
ON VOL
Set the maximum ON volume in this menu
point. Normally, the last heard volume is
set when the radio is switched on. However if it exceeds the volume set in
the menu, it is reduced to the set value.
• Select
ON VOL in the menu. "ON VOL”
appears in the display with the current
value.
• Use the turning knob to set the de-
sired value from 1 to 45.
• By briefly pressing the TPbutton or
the control button , you can store
the indicated value and go to the next
menu point
or
• by depressing the TPbutton for a few
moments, you can leave the set-up
menu without storing this change.
LED
This point is for setting whether the warn-
ing LED should blink when turned off in
conjunction with the absence of the
ignition key (indicated by " ON” ) or should
be turned off (indicated by "OFF”).
• Select LEDin the menu. "LED” is shown
in the display with the current value.
• Use the turning knob to set ON or
OFF.
• By briefly pressing the TPbutton or
the control button , you can store the indicated value and go to the next
menu point
or
• by depressing the
TPbutton for a few
moments, you can leave the set-up
menu without storing this change.
BEEP
In this menu point, you can decide if you
wish to continue to have an audible signal
in the set-up menu and e.g. when storing
programs.
• Select BEEPin the menu. "BEEP” is
shown in the display with the current
value.
• Use the turning knob to set ON or
OFF.
• By briefly pressing the TPbutton or
the control button , you can store
the indicated value and go to the next
menu point
or
• by depressing the TPbutton for a few
moments, you can leave the set-up
menu without storing this change.
13
GB
3. Bed. Anl. Skoda Radio Engl. 13.12.2004 14:20 Uhr Seite 13
