SEAT S.A. is permanently concerned about continuous development of its types and models. For this reason we ask you to understand,that at any given time, changes regarding shape, equipment and technique may take place on the car delivered. For this reason noright at all may derive based on the data, drawings and descriptions in this current handbook.
All texts, illustrations and standards in this handbook are based on the status of information at the time of printing. Except for erroror omission, the information included in the current handbookis valid as of the date of closing print.
Re-printing, copying or translating, whether total or partial is not allowed unless SEAT allows it in written form.
SEAT reserves all rights in accordance with the "Copyright" Act.
All rights on changes are reserved.
❀This paper has been manufactured using bleached non-chlorine cellulose.
© SEAT S.A. - Reprint: 15.04.07
VVeehhiiccllee ddaattaa
11..
22..
33..
44..
55..
11..Vehicle identification number
22..Identification numbers
Type/Model/Engine
Gearbox/Finishes
33..Identification letters
Engine/Gearbox/Paintwork
Equipment
44..Identification codes of variable equipment
55..Consumption (l/100 km) / CO2Emissions (g/km) urban
Consumption (l/100 km) / CO2Emissions (g/km) motorway
Consumption (l/100 km) / CO2Emissions (g/km) mixed
NNoottee
• We recommend that you visit an Authorised SEAT Service Centre
whenever you require any work done on your vehicle.
• SEAT regularly communicates to its Authorised Service Centres new
product developments. They have tools and highly specialized person-
nel who can guarantee the safety and performance of your vehicle.
• Scrupulously following the General Programme for Inspection
Services in Authorised SEAT Service Centres will ensure you maintain
greater value for your vehicle.
Interior PM 24/4/07 15:37 Página 3
SEAT maintenance programme
8SEAT maintenance programmeGeneral informationThis maintenance programme will inform you of the w ork that should be
carried out regularly on your vehicle in order to ensure th e safety, reliability
and durability required.
Using the “vehicle id entification” data or the data in this document, wi ll
ensure the correct spare parts for your vehicle are specified in c ase of repairs,
for many years after the initial purchase.
We recommend that you keep this maintenance programme with the vehicle
documents. The record of inspections carried out is one of the essential
requirements for exercising your rights under wa rranty.
The maintenance programme shows the date of delive ry, and this indicates
the starting date of the vehicle warranty.Maintenance ProgrammeThe SEAT maintenance programme consists of the dif ferent inspection serv-
ices which are carried out according to the time sin ce the vehicle purchase or
the mileage.
Each Inspection Service, as well as any additional oper ation required already
has a pre-established work time. This will allow you to know the total cost of
the service beforehand.
The SEAT Service Centre network is equipped with modern workshop tech-
nology and well-trained specialists. Many SEAT Serv ice Centres offer different
service packages at special prices.
Adverse conditionsThe Service Centre “service advisor” will inform you o f any necessary addi-
tional work within the intervals defined by the Inspection S ervice, according
to the conditions and environment in which the vehicle i s used. For example,
an oil change where the vehicle is used only for frequent short journeys or is
subject to extreme temperatures. Likewi se, when the vehicle is used in dusty
conditions the air, dust and pollen filter cartridges must be changed more
often and the timing belt checked.Diesel fuelThe Service Centre “service advisor” can provide information about which
countries use fuel with a high sulphur content. In th ese cases, the oil must be
changed every 7,500 km (5,000 miles).
Caution
•
Vehicles with the label “UNSUITABLE FOR BIODIESEL” on th e fuel cover
cannot be driven using biodiesel.
•
To be certain if your vehicle can be used with biodiesel according to the
DIN EN 14214 (FAME) standard consult your Serv ice Centre.
•
DIN is a German abbreviation for “Deutsches I nstitut für Normung e.V.”,
the German standards institute.
•
EN means European Norm.
•
FAME is the English abbreviation “F atty Acid Methyl Ester”
PM ibi cor_ingles Seite 8 Mittwoch, 21. März 2007 5 :22 17
