CLUTCH
Hydraulic clutch - Fault finding chartCLUTCH
Hydraulic clutch - Fault finding chart
20A
20A - 7
20A
20A - 7V1 MR-372-J84-20A000$830_eng.mif
Replace the clutch (clutch disc, pressure plate
and slave cylinder).
Bleed the hydraulic circuit.
Has the fault disappeared?
NO YES
Contact the Techline.
NOTES–Check that the customer has not topped up the brake fluid level.
–Check the condition of the brake pads before topping up the brake fluid.
Bleed the hydraulic circuit.
Are air bubbles present throughout the bleed?
YES
Replace the master cylinder.
Bleed the hydraulic circuit.
NOHas the customer complaint disappeared?
YES
Check that the customer complaint does not reappear during
a road test.
Remove the clutch and check the condition of the clutch and check that it is clean inside.
Are the internal walls of the clutch soiled with oil?
Check the mileage and the condition of the clutch.
YESDoes the vehicle have more than 30,000 miles (50,000 km) on
the clock?
NO
Replace the slave cylinder.
Check that the customer complaint
does not reappear during a road
test.
