8Electrical equipment
V2 MR-372-J84-80C000$TOC.mif
V2
80C
"The repair procedures given by the manufacturer in this document are based on the
technical specifications current when it was prepared.
The procedures may be modified as a result of changes introduced by the
manufacturer in the production of the various component units and accessories from
which his vehicles are constructed."
V2
All rights reserved by Renault s.a.s.
Edition Anglaise
Copying or translating, in part or in full, of this document or use of the service part
reference numbering system is forbidden without the prior written authority of
Renault s.a.s.
© Renault s.a.s. 2007
XENON BULBS
Program No.: V010
Vdiag No.: 05
Fault finding – Introduction 80C - 2
Fault finding – System operation 80C - 6
Fault finding – Component replacement 80C - 9
Fault finding – Configurations and programming 80C - 10
Fault finding – Fault summary table 80C - 13
Fault finding – Interpretation of faults 80C - 14
Fault finding – Conformity check 80C - 26
Fault finding – Interpretation of statuses 80C - 29
Fault finding – Parameter summary table 80C - 30
Fault finding – Interpretation of parameters 80C - 31
Fault finding – Customer complaints 80C - 34
Fault finding – Fault finding charts 80C - 35
