80C -4V2 MR-372-J84-80C000$010.mif
XENON BULBS
Fault finding – Introduction80C
Program No.: V010
Vdiag No.: 05
4. FAULT FINDING PROCEDURE
Check the battery charge and
the condition of the fuses
Print the system fault finding log
(available on CLIP and in the
Workshop Repair Manual
or Technical Note)
Connect CLIP
See ALP 1
Read the faults
Deal with faults found
Deal with stored faults
Conformity check
Use fault finding charts (ALPs)
Is there
communication
with UCH?
Are faults
present?
The cause is
still present
Is the cause
still present?Is the cause
still present?
Contact the Techline with the
completed fault finding log
No
NoNo
No No
Yes
Yes
YesFault
solvedFault
solved Fault
solved
