Maintenance Schedule................................ 374
Introduction............................................... 374
Maintenance Requirements........................ 374
Your Vehicle and the Environment............ 374
How This Section is Organized................. 374
Part A: Scheduled Maintenance
Services................................................. 376
Using the Maintenance Schedule............... 376
Scheduled Maintenance............................. 377
Part B: Owner Checks and Services......... 386
At Each Fuel Fill....................................... 386
At Least Once a Month............................. 386
At Least Twice a Year.............................. 387At Least Once a Year............................... 388
Part C: Periodic Maintenance
Inspections............................................. 392
Steering, Suspension and Front Drive
Axle Boot and Seal Inspection............... 392
Exhaust System Inspection........................ 392
Fuel System Inspection............................. 392
Engine Cooling System Inspection............. 393
Throttle System Inspection........................ 393
Brake System Inspection........................... 393
Part D: Recommended Fluids and
Lubricants.............................................. 394
Part E: Maintenance Record...................... 396
Section 6 Maintenance Schedule
373
Part C: Periodic Maintenance
Inspections
Listed in this part are inspections and services
which should be performed at least twice a
year (for instance, each spring and fall).You
should let your dealer’s service department
do these jobs. Make sure any necessary repairs
are completed at once.
Proper procedures to perform these services may
be found in a service manual. SeeService
Publications Ordering Information on page 417.
Steering, Suspension and Front
Drive Axle Boot and Seal Inspection
Inspect the front and rear suspension and
steering system for damaged, loose or missing
parts, signs of wear or lack of lubrication. Inspect
the power steering lines and hoses for proper
hook-up, binding, leaks, cracks, cha ng, etc. Clean
and then inspect the drive axle boot seals for
damage, tears or leakage. Replace seals if
necessary.
Exhaust System Inspection
Inspect the complete exhaust system. Inspect the
body near the exhaust system. Look for broken,
damaged, missing or out-of-position parts as
well as open seams, holes, loose connections or
other conditions which could cause a heat
build-up in the oor pan or could let exhaust fumes
into the vehicle. SeeEngine Exhaust on
page 119.
Fuel System Inspection
Inspect the complete fuel system for damage
or leaks.
392