2007 PEUGEOT 607 light

4
66
Always remove the key from
the ignition when leaving the
vehicle, even for a short time.
In the event of contact when
operating the windows, you must re-
verse the movement of the window. To
do this, press the switch concerned.
When the driver operates the passen-
ger window switches, he must ensure
that no one is preventing correct clos-
ing of the window.
The driver must ensure that passengers
use the electric windows correctly.
Be aware of children when operating
the windows. DOORS
Opening the doors from outside
Opening the doors from inside Locking/unlocking from the inside
-
Using button
A of the centre console:
this allows the doors, the boot and
the fuel i ller l ap to be locked or
unlocked.

Note: the button A indicator light is lit
or l ashes when the vehicle is locked.
- Using button B on the door:

4
66
Always remove the key from
the ignition when leaving the
vehicle, even for a short time.
In the event of contact when
operating the windows, you must re-
verse the movement of the window. To
do this, press the switch concerned.
When the driver operates the passen-
ger window switches, he must ensure
that no one is preventing correct clos-
ing of the window.
The driver must ensure that passengers
use the electric windows correctly.
Be aware of children when operating
the windows. DOORS
Opening the doors from outside
Opening the doors from inside Locking/unlocking from the inside
-
Using button
A of the centre console:
this allows the doors, the boot and
the fuel i ller l ap to be locked or
unlocked.

Note: the button A indicator light is lit
or l ashes when the vehicle is locked.
- Using button B on the door:

5VISIBILITY
71
LIGHTS STALK
Lights off.
Side lights. Dipped/main beam head-
lamps. Dipped/main beam change

 Pull the stalk fully towards you.
Lights on
With the ignition and the automatic lights
function switched off, on opening the
driver's door a buzzer sounds to warn
you that you have left your lights on.
Front and rear fog lamps (ring B)

 Turn ring B forwards to switch on
and backwards to switch off. The
position is coni rmed by the light
on the instrument panel.
Front fog lamps (one press)
These operate with the side lights, dipped
headlamps or main beam headlamps.
Rear fog lamps (two presses)
These operate with the side lights and
the front fog lamps, or with the dipped
headlamps.
Left: downwards.

Right: upwards.
Direction indicators (l ashers)

Note: if you forget to return the
direction indicator to its normal
position, the volume of the
audible signal will increase, if
you are driving at a speed greater than
50 mph (80 km/h).
Parking lights
The side lights are lit on the side the
trafi c is on.
With the ignition off and within the next
minute, place the direction indicators
stalk on the trafi c side (for example:
for parking on the right; switching on
of the lights on the left).
This is indicated by an audible signal
and lighting of the corresponding
direction indicator on the instrument
panel.
Automatic "follow-me-home"
lighting
When you leave your vehicle with the
automatic switching on of the lights
activated , the side lights and dipped
headlamps remain on for the duration
selected when the ignition is switched
off.
To deactivate or activate this func-
tion, pass via the multifunction display

" P e r s o n a l i s a t i o n - C o n f i g u r a t i o n "
menu.
Front and rear lights (ring A)

 Turn ring A to the position required.

5VISIBILITY
72
The timed duration must
also be set, via the multi-
function display "Person-
alisation-Coni guration"
menu. Automatic switching on of the
lights
Side lights and dipped beam head-
lamps switch on automatically if the
light is poor, or during operation of the
windscreen wipers. They switch off
as soon as the light becomes bright
enough or the windscreen wipers
stop.

Note: in foggy weather, the brightness
sensor can detect sufi cient light. As a
consequence, the lights will not come
on automatically.
This function is active when the vehicle
is supplied to the customer.
To switch the function on
or off, use the multifunction
display "Personalisation-
Coni guration" menu.
Activation Deactivation.
When this function is activated,
the indicator light on the
instrument panel comes on. When the function is deacti-
vated, the indicator light on the
instrument panel comes on.
Cancellation:

 l ash the headlamps,

 get out of the vehicle and lock it.
Manual "follow-me-home" lighting
In the absence of the automatic switch-
ing on of the lights, the manual "follow-
me-home" lighting can be activated.
When you leave your vehicle, the side
lights and dipped headlamps remain
on for approximately 1 minute.
Activation:

 switch off the engine,

 l ash the headlamps,

 get out of the vehicle and lock it.
Deactivation:

 l ash the headlamps again,

 get out of the vehicle and lock it.
If the brightness sensor does not
function correctly , the system activates
the function and the lights come on.
Contact a PEUGEOT dealer to have
the system checked.
Daytime lights *
On vehicles which are equipped with
daytime lights, the dipped headlamps
come on when the vehicle is started.
This indicator light comes on on
the instrument panel screen.
The instruments and controls
(instrument panel, multifunction
display, air conditioning control
panel, ...) are only lit on switching
to the automatic switching on of the lights
mode or when the lights are switched on
manually.
* According to country.
The brightness of the display
and of the instrument panel
may change when the lights
are switched on automatically.
If your lights have been
switched on manually, turn the
ring back to position
0 , lights
off.

5VISIBILITY
72
The timed duration must
also be set, via the multi-
function display "Person-
alisation-Coni guration"
menu. Automatic switching on of the
lights
Side lights and dipped beam head-
lamps switch on automatically if the
light is poor, or during operation of the
windscreen wipers. They switch off
as soon as the light becomes bright
enough or the windscreen wipers
stop.

Note: in foggy weather, the brightness
sensor can detect sufi cient light. As a
consequence, the lights will not come
on automatically.
This function is active when the vehicle
is supplied to the customer.
To switch the function on
or off, use the multifunction
display "Personalisation-
Coni guration" menu.
Activation Deactivation.
When this function is activated,
the indicator light on the
instrument panel comes on. When the function is deacti-
vated, the indicator light on the
instrument panel comes on.
Cancellation:

 l ash the headlamps,

 get out of the vehicle and lock it.
Manual "follow-me-home" lighting
In the absence of the automatic switch-
ing on of the lights, the manual "follow-
me-home" lighting can be activated.
When you leave your vehicle, the side
lights and dipped headlamps remain
on for approximately 1 minute.
Activation:

 switch off the engine,

 l ash the headlamps,

 get out of the vehicle and lock it.
Deactivation:

 l ash the headlamps again,

 get out of the vehicle and lock it.
If the brightness sensor does not
function correctly , the system activates
the function and the lights come on.
Contact a PEUGEOT dealer to have
the system checked.
Daytime lights *
On vehicles which are equipped with
daytime lights, the dipped headlamps
come on when the vehicle is started.
This indicator light comes on on
the instrument panel screen.
The instruments and controls
(instrument panel, multifunction
display, air conditioning control
panel, ...) are only lit on switching
to the automatic switching on of the lights
mode or when the lights are switched on
manually.
* According to country.
The brightness of the display
and of the instrument panel
may change when the lights
are switched on automatically.
If your lights have been
switched on manually, turn the
ring back to position
0 , lights
off.

5VISIBILITY
75
COURTESY LIGHTS Deactivation
Activation
To re-activate the automatic lighting,
press switch 1 again. Sill illumination
The sill lighting is at the bottom of each
door trim.
The lights come on automatically
when a door is opened and switch off
automatically when all of the doors are
closed.
Boot light
The boot light is located in the left boot
trim.
It comes on automatically when the
boot is opened and switches of auto-
matically when the boot is closed.

1. Front courtesy light

2. Front map reading lights
With the ignition on, operate the relevant switch.

3. Rear courtesy light

4. Rear map reading lights
With the ignition on, operate the relevant switch.
Pressing switch 1 switches on the
front and rear courtesy lights for ten
minutes.
The front and rear courtesy lights come
on automatically when the ignition key
is removed, on unlocking the vehicle
or on opening one of the doors.
They gradually go off after the ignition
has been switched on or the vehicle
is locked. The courtesy lights can be deacti-
vated by pressing switch
1 for more
than three seconds. Pressing switch

1 briel y switches the front and rear
courtesy lights on and off.
The map reading lights are not affected
by this and can still be switched on .

6LAYOUT
77
Front armrest CENTRE CONSOLE
To obtain a resting or driving position:

 Lift the centre handle 1 and pull the
armrest forwards. To return to the
initial position, push the armrest
backwards.
To open the lower compartment:

 Raise the left handle 2 . CDs and
coins can be stored here.
To open the top compartment:

 Raise the right handle 3 . This is
equipped with a can holder.
1 - Storage compartment
2 - Front lighter (100 W max)
Press and wait for a few moments until
it springs out automatically.
3 - Front ashtray
Press the cover to open the ashtray.
To release the ashtray for emptying,
open it then push the cover down-
wards.
4 - Rear ashtray
Press the cover to open the ashtray.
To empty the ashtray, detach the re-
ceptacle by pulling it towards you.
To rei t the ashtray, clip it back into its
housing.
5 - Rear lighter (100 W max)
Push in and wait for a few moments
until it springs out automatically.

6LAYOUT
78
REMOVING A MAT Rear shelf compartment
Rear armrest
This provides access to the ski l ap
from the passenger compartment.
It has two cup holders.
Ski flap

 Lower the armrest to access the
ski l ap. Open by pulling the handle
downwards. Electric rear sunblind
To prevent the mat from becoming
caught under the pedals:
- only use mats which are
suited to the i xings already
present in the vehicle.
It is imperative that these i x-
ings are used.
- never i t one mat on top of another.
Do not place anything on the
blind, to avoid it being damaged.
When removing a mat on the driver’s
or passenger’s side, push back the
seat as far as possible and remove
the clips.
To remove a rear mat, push the cor-
responding front seat forward and re-
move the clip.
On rei tting, position the mat and tight-
en the securing clips fully.

Ensure that the mat is secured correctly.
This is provided for the storage of a
i rst aid kit.
The catch on the lid is designed to
withstand a weight of 9 lbs (4 kg) on
impact.
The blind, i tted to the rear parcel shelf,
is intended to protect occupants from
the glare of the sun and the lights of
cars behind.
With the ignition on:

 Briel y press button A on the cen-
tre console to open it out.

 Briel y press button A again to
store it away.