2007 PEUGEOT 307 CC DAG ignition
[x] Cancel search: ignitionPage 96 of 184
!
80
DRIVING
HANDBRAKE
Applying
Pull the handbrake to immobilise
your vehicle. When the vehicle is being
driven, illumination of this
w a r n i n g l i g h t a n d o f t h e
STOP w a r n i n g l i g h t , a c -
c o m p a n i e d b y a n a u d i b l e
s i g n a l a n d a m e s s a g e o n t h e m u l t i -
f u n c t i o n d i s p l a y , i n d i c a t e s t h a t t h e
handbrake is still on or has not been
p r o p e r l y r e l e a s e d .
Releasing
P u l l o n t h e h a n d l e a n d p r e s s t h e
button to release the handbrake.
T h e f o u r s p e e d automatic gearbox
o f f e r s a c h o i c e b e t w e e n t h e c o m f o r t
of integral automatic o p e r a t i o n , e n -
hanced by a sport and a snow p r o -
gramme, or manual gear changing .
P a r k : t o immobilise the vehicle or
start the engine , w i t h t h e h a n d b r a k e
on or off.
R e v e r s e : to reverse (select this
p o s i t i o n w i t h t h e v e h i c l e s t a t i o n a r y ,
engine at idle).
N e u t r a l : to start the engine and to
park , w i t h t h e h a n d b r a k e o n .
Note: i f p o s i t i o n N is engaged
i n a d v e r t e n t l y w h i l e d r i v i n g , a l l o w t h e
e n g i n e t o r e t u r n t o i d l e b e f o r e e n g a g -
i n g p o s i t i o n D to accelerate.
D r i v e : for driving in automatic mode.
M a n u a l : t o s e l e c t t h e g e a r s .
S : s p o r t p r o g r a m m e .
: s n o w p r o g r a m m e .
Gear selection gate
Move the lever in the gate to
s e l e c t a p o s i t i o n .
T h e i n d i c a t o r l i g h t f o r t h e s e l e c - t i o n i s d i s p l a y e d o n t h e i n s t r u -
m e n t p a n e l d i s p l a y .
Starting the engine
W i t h t h e h a n d b r a k e a p p l i e d ,
s e l e c t p o s i t i o n P or N in the gate.
Turn the ignition key to the
Starting p o s i t i o n .
O t h e r w i s e , y o u a r e w a r n e d b y a n
audible signal and a message on the
m u l t i f u n c t i o n d i s p l a y .
"PORSCHE TIPTRONIC
SYSTEM" AUTOMATIC
GEARBOX
W h e n p a r k i n g o n a s l o p e , d i r e c t
y o u r w h e e l s t o w a r d s t h e p a v e -
m e n t a n d p u l l t h e h a n d b r a k e .
Page 102 of 184
!
86
DRIVING
Cancelling the memorised
reference speed
W h e n t h e v e h i c l e b e c o m e s s t a -
t i o n a r y , a f t e r s w i t c h i n g o f f t h e
ignition, the system no longer
m e m o r i s e s a s p e e d .
Reactivating the cruise control
A f t e r c a n c e l l a t i o n o f t h e c r u i s e c o n -
trol,
press button 4 . Y o u r v e h i c l e w i l l
r e t u r n t o t h e l a s t m e m o r i s e d s p e e d .
T h e d i s p l a y i n d i c a t e s ( e . g . a t 7 0 m p h
( 1 1 0 k m / h ) ) :
Changing the memorised
reference speed
T o m e m o r i s e a s p e e d h i g h e r t h a n t h e
p r e v i o u s o n e , t h e r e a r e t w o o p t i o n s :
W i t h o u t u s i n g t h e a c c e l e r a t o r :
p r e s s b u t t o n 3 ;
A b r i e f p r e s s i n c r e a s e s b y 1 m p h
(1 km/h).
A n e x t e n d e d p r e s s i n c r e a s e s b y
5 m p h ( 5 k m / h ) .
A m a i n t a i n e d p r e s s i n c r e a s e s i n
s t e p s o f 5 m p h ( 5 k m / h ) .
U s i n g t h e a c c e l e r a t o r :
e x c e e d t h e m e m o r i s e d s p e e d u n -
t i l t h e r e q u i r e d s p e e d i s r e a c h e d ,
p r e s s b u t t o n 2 or 3 . Switching the function off
Place dial 1 i n p o s i t i o n 0 t o s w i t c h
the system off.
Operating fault
I n t h e e v e n t o f a c r u i s e c o n t r o l m a l -
f u n c t i o n , t h e m e m o r i s e d s p e e d i s
e r a s e d , t h e d a s h e s l a s h f o r a f e w
s e c o n d s :
T o m e m o r i s e a s p e e d l o w e r t h a n t h e
p r e v i o u s o n e :
p r e s s b u t t o n 2 ;
A b r i e f p r e s s d e c r e a s e s b y 1 m p h
(1 km/h).
A n e x t e n d e d p r e s s d e c r e a s e s b y
5 m p h ( 5 k m / h ) .
A m a i n t a i n e d p r e s s d e c r e a s e s i n
s t e p s o f 5 m p h ( 5 k m / h ) .
Contact a PEUGEOT dealer to have
the system checked. When changing the memorised
r e f e r e n c e s p e e d b y m e a n s o f a
m a i n t a i n e d p r e s s , p a y a t t e n t i o n
a s t h e s p e e d c a n i n c r e a s e o r
d e c r e a s e r a p i d l y .
Do not use the cruise control on
s l i p p e r y r o a d s o r i n h e a v y t r a f i c .
I n t h e e v e n t o f a s t e e p s l o p e , t h e
c r u i s e c o n t r o l c a n n o t p r e v e n t
the vehicle from exceeding the
p r o g r a m m e d s p e e d .
In any event, the cruise control
c a n n o t r e p l a c e t h e n e e d t o c o m -
p l y w i t h s p e e d l i m i t s , n o r c a n i t
r e p l a c e t h e n e e d f o r v i g i l a n c e
a n d r e s p o n s i b i l i t y o n t h e p a r t o f
the driver.
T o p r e v e n t t h e m a t f r o m b e c o m i n g
c a u g h t u n d e r t h e p e d a l s :
- e n s u r e t h a t t h e m a t i s p o s i - tioned correctly.
- n e v e r i t o n e m a t o n t o p o f another.
Page 125 of 184
10
108
PRACTICAL INFORMATION
Fuse N° Rating Functions
F8 25 A Starter control.
F9 10 A A d d i t i o n a l h e a t i n g u n i t ( D i e s e l ) , e n g i n e c o o l a n t l e v e l s w i t c h .
F10 30 A Engine management actuators (ignition coil, solenoid valves, o
xygen sensors, control units,
i n j e c t o r s , h e a t e r s ) , p u r g e c a n i s t e r s o l e n o i d v a l v e ( 1 . 6 l i t r e p e t r o l ) .
F11 40 A A i r c o n d i t i o n i n g b l o w e r .
F12 30 A W i n d s c r e e n w i p e r s l o w / h i g h s p e e d .
F13 40 A B u i l t - i n s y s t e m s i n t e r f a c e s u p p l y ( i g n i t i o n p o s i t i v e ) .
F14 30 A A i r p u m p ( 2 l i t r e p e t r o l ) .
F15 10 A R i g h t m a i n b e a m h e a d l a m p .
F16 10 A L e f t m a i n b e a m h e a d l a m p .
F17 15 A L e f t d i p p e d h e a d l a m p .
F18 15 A R i g h t d i p p e d h e a d l a m p .
Page 127 of 184
10
!
110
PRACTICAL INFORMATION
Special front windscreen
wiper position
W i t h i n o n e m i n u t e o f s w i t c h i n g o f f
t h e i g n i t i o n , o p e r a t e t h e w i p e r s
s t a l k t o p o s i t i o n t h e w i p e r b l a d e s
i n t h e c e n t r e o f t h e w i n d s c r e e n
( m a i n t e n a n c e p o s i t i o n ) .
Changing a wiper blade
L i f t t h e w i p e r a r m , t h e n u n c l i p t h e
blade and remove it.
F i t t h e n e w b l a d e a n d p u s h b a c k
the arm.
Note: t h e s h o r t e s t b l a d e i s i t t e d o n
t h e v e h i c l e ' s r i g h t - h a n d w i n d s c r e e n
w i p e r a r m .
To return the windscreen wipers to
their normal position, switch on the
ignition and operate the wiper stalk.
BATTERY
To charge the battery using a
battery charger:
- D i s c o n n e c t t h e b a t t e r y s t a r t i n g
w i t h t h e n e g a t i v e ( - ) t e r m i n a l ,
- F o l l o w t h e i n s t r u c t i o n s f o r u s e g i v e n b y t h e b a t t e r y c h a r g e r m a n u -
facturer,
- C h e c k t h a t t h e t e r m i n a l s a n d c o n n e c t o r s a r e c l e a n ; i f t h e y a r e
c o v e r e d w i t h s u l p h a t e ( w h i t e o r
g r e e n i s h d e p o s i t ) , d i s c o n n e c t
them and clean them,
- R e c o n n e c t t h e b a t t e r y s t a r t i n g w i t h t h e n e g a t i v e ( - ) t e r m i n a l .
It is advisable to disconnect the
battery if the vehicle is not to be
used for a period of more than
one month.
To start the vehicle from
another battery:
- C o n n e c t t h e r e d c a b l e t o t h e p o s i -
t i v e ( + ) t e r m i n a l s o f t h e t w o b a t t e r -
ies,
- C o n n e c t o n e e n d o f t h e g r e e n o r
b l a c k c a b l e t o t h e n e g a t i v e ( - ) t e r -
minal of the slave battery,
- C o n n e c t t h e o t h e r e n d o f t h e g r e e n o r b l a c k c a b l e t o a n e a r t h p o i n t o n
t h e b r o k e n d o w n v e h i c l e a s f a r a s
p o s s i b l e f r o m t h e b a t t e r y ,
-
O p e r a t e t h e s t a r t e r , l e t t h e e n g i n e r u n ,
- W a i t f o r t h e e n g i n e t o r e t u r n t o idle, then disconnect the cables.
WIPER BLADE
B e f o r e d i s c o n n e c t i n g t h e b a t -
t e r y , y o u m u s t w a i t f o r 2 m i n u t e s
a f t e r s w i t c h i n g o f f t h e i g n i t i o n .
Never disconnect a terminal
w h e n t h e e n g i n e i s r u n n i n g .
N e v e r c h a r g e a b a t t e r y w i t h o u t
i r s t d i s c o n n e c t i n g t h e t e r m i n a l s .
C l o s e t h e w i n d o w s , t h e r e t r a c t -
able roof and the doors before
disconnecting the battery. If the
w i n d o w s d o n o t o p e r a t e n o r m a l -
l y f o l l o w i n g r e c o n n e c t i o n o f t h e
battery, they must be reinitialised
( s e e s e c t i o n s " R e i n i t i a l i s a t i o n o f
t h e e l e c t r i c w i n d o w s " a n d " R e i n i -
t i a l i s a t i o n o f t h e a u t o m a t i c p a r t i a l
o p e n i n g o f t h e d o o r w i n d o w s " ) .
After every reconnection of the
b a t t e r y , s w i t c h o n t h e i g n i t i o n
a n d w a i t 1 m i n u t e b e f o r e s t a r t i n g
t o a l l o w t h e e l e c t r o n i c s y s t e m s t o
b e i n i t i a l i s e d . I f s l i g h t d i f i c u l t i e s
a r e e x p e r i e n c e d a f t e r t h i s , p l e a s e
contact a PEUGEOT dealer.
F o l l o w i n g d i s c o n n e c t i o n o f t h e
battery, the remote control key
a n d t h e G P S s a t e l l i t e n a v i g a -
tion system must be reinitialised
( s e e c o r r e s p o n d i n g s e c t i o n ) .
Page 128 of 184
10
!
110
PRACTICAL INFORMATION
Special front windscreen
wiper position
W i t h i n o n e m i n u t e o f s w i t c h i n g o f f
t h e i g n i t i o n , o p e r a t e t h e w i p e r s
s t a l k t o p o s i t i o n t h e w i p e r b l a d e s
i n t h e c e n t r e o f t h e w i n d s c r e e n
( m a i n t e n a n c e p o s i t i o n ) .
Changing a wiper blade
L i f t t h e w i p e r a r m , t h e n u n c l i p t h e
blade and remove it.
F i t t h e n e w b l a d e a n d p u s h b a c k
the arm.
Note: t h e s h o r t e s t b l a d e i s i t t e d o n
t h e v e h i c l e ' s r i g h t - h a n d w i n d s c r e e n
w i p e r a r m .
To return the windscreen wipers to
their normal position, switch on the
ignition and operate the wiper stalk.
BATTERY
To charge the battery using a
battery charger:
- D i s c o n n e c t t h e b a t t e r y s t a r t i n g
w i t h t h e n e g a t i v e ( - ) t e r m i n a l ,
- F o l l o w t h e i n s t r u c t i o n s f o r u s e g i v e n b y t h e b a t t e r y c h a r g e r m a n u -
facturer,
- C h e c k t h a t t h e t e r m i n a l s a n d c o n n e c t o r s a r e c l e a n ; i f t h e y a r e
c o v e r e d w i t h s u l p h a t e ( w h i t e o r
g r e e n i s h d e p o s i t ) , d i s c o n n e c t
them and clean them,
- R e c o n n e c t t h e b a t t e r y s t a r t i n g w i t h t h e n e g a t i v e ( - ) t e r m i n a l .
It is advisable to disconnect the
battery if the vehicle is not to be
used for a period of more than
one month.
To start the vehicle from
another battery:
- C o n n e c t t h e r e d c a b l e t o t h e p o s i -
t i v e ( + ) t e r m i n a l s o f t h e t w o b a t t e r -
ies,
- C o n n e c t o n e e n d o f t h e g r e e n o r
b l a c k c a b l e t o t h e n e g a t i v e ( - ) t e r -
minal of the slave battery,
- C o n n e c t t h e o t h e r e n d o f t h e g r e e n o r b l a c k c a b l e t o a n e a r t h p o i n t o n
t h e b r o k e n d o w n v e h i c l e a s f a r a s
p o s s i b l e f r o m t h e b a t t e r y ,
-
O p e r a t e t h e s t a r t e r , l e t t h e e n g i n e r u n ,
- W a i t f o r t h e e n g i n e t o r e t u r n t o idle, then disconnect the cables.
WIPER BLADE
B e f o r e d i s c o n n e c t i n g t h e b a t -
t e r y , y o u m u s t w a i t f o r 2 m i n u t e s
a f t e r s w i t c h i n g o f f t h e i g n i t i o n .
Never disconnect a terminal
w h e n t h e e n g i n e i s r u n n i n g .
N e v e r c h a r g e a b a t t e r y w i t h o u t
i r s t d i s c o n n e c t i n g t h e t e r m i n a l s .
C l o s e t h e w i n d o w s , t h e r e t r a c t -
able roof and the doors before
disconnecting the battery. If the
w i n d o w s d o n o t o p e r a t e n o r m a l -
l y f o l l o w i n g r e c o n n e c t i o n o f t h e
battery, they must be reinitialised
( s e e s e c t i o n s " R e i n i t i a l i s a t i o n o f
t h e e l e c t r i c w i n d o w s " a n d " R e i n i -
t i a l i s a t i o n o f t h e a u t o m a t i c p a r t i a l
o p e n i n g o f t h e d o o r w i n d o w s " ) .
After every reconnection of the
b a t t e r y , s w i t c h o n t h e i g n i t i o n
a n d w a i t 1 m i n u t e b e f o r e s t a r t i n g
t o a l l o w t h e e l e c t r o n i c s y s t e m s t o
b e i n i t i a l i s e d . I f s l i g h t d i f i c u l t i e s
a r e e x p e r i e n c e d a f t e r t h i s , p l e a s e
contact a PEUGEOT dealer.
F o l l o w i n g d i s c o n n e c t i o n o f t h e
battery, the remote control key
a n d t h e G P S s a t e l l i t e n a v i g a -
tion system must be reinitialised
( s e e c o r r e s p o n d i n g s e c t i o n ) .
Page 161 of 184
142
2
abc
5
jkl
8
tuv 3
def
6
mno
9
wxyz
1 4
ghi
7
pqrs
0 #
ESC
MENU LIST
ESC
MENU LIST
ESC
MENU LIST
2
abc
5
jkl
8
tuv 3
def
6
mno
9
wxyz
1 4
ghi
7
pqrs
0 #
2
abc
5
jkl
8
tuv 3
def
6
mno
9
wxyz
1 4
ghi
r
7
pq s
0
#
2
abc
5
jkl
8
tuv 3
def
6
mno
9
wxyz
1 4
ghi
r
7
pq s
0
#
1
2
3 1
2
06
TELEPHONE
INSTALLING YOUR SIM CARD ENTERING THE PIN CODE
Access the slot by pressing the button
using the tip of a pen.
Install the SIM card
in the holder and
then insert it in the
slot.
To remove the SIM card, repeat step 1.
Your SIM card must be installed and removed with th e RT4 GPS
audio/telephone switched off and the ignition off. Enter the PIN code on the keypad.
C o n i r m t h e P I N c o d e b y p r e s s i n g
button #.
PIN CODE
When entering your PIN code, tick the STORE PIN tab to gain
access to the telephone without having to enter thi s code when it is
used subsequently.
(NOT SUPPLIED)
Page 180 of 184
158
1
2
31
2
4
1
04 H A N D S - F R E E K I T
For safety reasons and because they require prolong ed attention on
the part of the driver, the operations for matching of the Bluetooth
mobile telephone with the RD4 hands-free kit must b e carried out
with the vehicle stationary and the ignition on.
Select the accessory which corresponds to the
n a m e o f t h e v e h i c l e , a s u p e r i m p o s e d c o n i g u r a t i o n
display appears on the multifunction display. Activate the telephone's Bluetooth function and
carry out a search of the Bluetooth accessories
present for the telephone.
Select the YES tab on the display using
t h e b u t t o n s t h e n c o n i r m b y p r e s s i n g O K .
E n t e r t h e v e h i c l e ' s a u t h e n t i c a t i o n c o d e ( = 1 2 3 4 ) .
Depending on the telephone, you may be asked
to enter this code before the superimposed
c o n i g u r a t i o n d i s p l a y a p p e a r s .
YES
YES
The services offered by the hands-free kit depend o
n the network, the SIM card and the compatibility
of the Bluetooth equipment used.
C o n s u l t y o u r t e l e p h o n e ' s m a n u a l a n d y o u r o p e r a t o r t o i n d o u t w h i c h s e r v i c e s a r e a v a i l a b l e t o y o u .
A list of mobile telephones which offer the best ra nge of services is available from the network.
Contact a PEUGEOT dealer.
RECEIVING A CALL
An incoming call is announced by a ring and a super imposed display
on the multifunction display.
Select the YES tab on the display
u s i n g t h e b u t t o n s a n d c o n i r m b y
pressing OK.
Press the end of the steering wheel stalk to accept
the call.
Press the end of the steering wheel stalk for more
than two seconds to access your directory.
To dial a number, use the keypad on your
telephone. MAKING A CALL
MATCHING A TELEPHONE
DISPLAY C