2007 NISSAN ARMADA coolant temperature

[x] Cancel search: coolant temperature

Page 221 of 344

NISSAN ARMADA 2007 1.G Owners Manual If:
1. The engine coolant temperature is not re-
duced.
2. The air conditioning cooling function does
not turn back ON.
3. The engine oil pressure warning/engine
coolant temperature high indicator
il-

Page 242 of 344

NISSAN ARMADA 2007 1.G Owners Manual ENGINE BLOCK HEATER (if so
equipped)
Engine block heaters are available through
NISSAN dealers to assist in cold temperature
starting. The engine block heater should be used
when the outside temperatu

Page 252 of 344

NISSAN ARMADA 2007 1.G Owners Manual cMake sure the jumper cables do not
touch moving parts in the engine com-
partment and that the cable clamps do
not contact any other metal.
5. Start the engine of the booster vehicle and
let it run f

Page 253 of 344

NISSAN ARMADA 2007 1.G Owners Manual 3. Get out of the vehicle. Look and listen for
steam or coolant escaping from the radiator
before opening the hood. (If steam or cool-
ant is escaping, turn off the engine.) Do not
open the hood furth

Page 266 of 344

NISSAN ARMADA 2007 1.G Owners Manual Windshield defrosterCheck that the air
comes out of the defroster outlets properly and in
sufficient quantity when operating the heater or
air conditioner.
Under the hood and vehicle
The maintenance i

Page 269 of 344

NISSAN ARMADA 2007 1.G Owners Manual The engine cooling system is filled at the factory
with Genuine NISSAN Long Life
Antifreeze/Coolant to provide year-round anti-
freeze and coolant protection.The anti-freeze so-
lution contains rust a

Page 270 of 344

NISSAN ARMADA 2007 1.G Owners Manual If the cooling system frequently requires
coolant, have it checked by a NISSAN
dealer.
CHANGING ENGINE COOLANT
A NISSAN dealer can change the engine coolant.
The service procedure can be found in the

Page 304 of 344

NISSAN ARMADA 2007 1.G Owners Manual The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedure
described in the “Maintenance and do-it-yourself” section to
Page:   < prev 1-8 9-16 17-24 next >