2007 NISSAN ALTIMA HYBRID oil level

[x] Cancel search: oil level

Page 92 of 344

NISSAN ALTIMA HYBRID 2007 L32A / 4.G Owners Manual WARNING
Your brake system may not be working
properly if both the brake warning light
and electronically controlled brake sys-
tem warning light come on when the Hy-
brid System is in READY mode and t

Page 227 of 344

NISSAN ALTIMA HYBRID 2007 L32A / 4.G Owners Manual If the engine fails to start using a registered key
(for example, when interference is caused by
another registered key, an automated toll road
device or automatic payment device on the key
ring) , re

Page 265 of 344

NISSAN ALTIMA HYBRID 2007 L32A / 4.G Owners Manual 8 Maintenance and do-it-yourself
Maintenance requirements..........................8-2
General maintenance..............................8-2
Explanation of general maintenance items.........8-2
Mainten

Page 268 of 344

NISSAN ALTIMA HYBRID 2007 L32A / 4.G Owners Manual and are installed securely. Check the belt web-
bing for cuts, fraying, wear or damage.
Steering wheelCheck for changes in the steer-
ing system, such as excessive freeplay, hard
steering or strange n

Page 274 of 344

NISSAN ALTIMA HYBRID 2007 L32A / 4.G Owners Manual CHECKING INVERTER COOLANT
LEVEL
Check the coolant levelin the reservoir when
the engine and inverter are cold.If the cool-
ant level is below the MIN level
sB, add coolant to
the MAX level
sA.
If the

Page 275 of 344

NISSAN ALTIMA HYBRID 2007 L32A / 4.G Owners Manual 5. Remove the dipstick again and check the oil
level. It should be between the H (High) and
L (Low) marks
sB. This is the normal oper-
ating oil level range. If the oil level is below
the L (Low) mark

Page 276 of 344

NISSAN ALTIMA HYBRID 2007 L32A / 4.G Owners Manual 5. Remove the drain plugsBwith a wrench by
turning it counterclockwise and completely
drain the oil.
If the oil filter is to be changed, remove and
replace it at this time. See “Changing engine
oil

Page 277 of 344

NISSAN ALTIMA HYBRID 2007 L32A / 4.G Owners Manual CAUTION
Be careful not to burn yourself. The engine
oil may be hot.
5. Wipe the engine oil filter sealing surface with
a clean rag.
Be sure to remove any old gasket material
remaining on the sealing s
Page:   1-8 9-16 next >