2007 Mercury Mountaineer spare tire

[x] Cancel search: spare tire

Page 278 of 360

Mercury Mountaineer 2007  Owners Manuals 4. Turn off the power running boards (if equipped). Refer toRunning
boardsin theDriver Controlschapter.
Note:Passengers should not remain
in the vehicle when the vehicle is
being jacked.
5. Block the

Page 279 of 360

Mercury Mountaineer 2007  Owners Manuals Removing the jack and tools
1. Open liftgate and remove the
carpeted floor lid.
2. Turn jack screw eyelet (1)
counterclockwise to release
pressure.
3. Rotate the locking pin (2)
clockwise until loose

Page 280 of 360

Mercury Mountaineer 2007  Owners Manuals 2. Insert the lug wrench on the
winch drive nut.
The wrench will stop moving and
forward resistance to turning will be
felt when properly engaged.
3. Turn the wrench
counterclockwise until the tire is

Page 282 of 360

Mercury Mountaineer 2007  Owners Manuals 4. Position the jack according to the
illustrated guides and turn the jack
handle clockwise until the tire is a
maximum of 1 inch (25 mm) off the
ground.
Note:Do not use the running
boards, front and

Page 283 of 360

Mercury Mountaineer 2007  Owners Manuals 8. Remove the jack and fully tighten
the lug nuts in the order shown.
Refer toWheel lug nut torque
specificationslater in this chapter
for the proper lug nut torque
specification.
Stowing the flat/spa

Page 356 of 360

Mercury Mountaineer 2007  Owners Manuals Special notice
ambulance conversions ..............8
utility-type vehicles ....................8
Specification chart,
lubricants ...................................342
Speed control ..................
Page:   < prev 1-8 9-16 17-24