2007 MERCEDES-BENZ SLR CLASS fuel pump

Contents
At the gas station............................... 247
Refueling ...................................... 247
Check regularly and before
a long trip .................................... 248
Engine compartment.......................... 250
Hood ............................................ 250
Engine oil...................................... 253
Transmission fluid level ................ 254
Coolant......................................... 255
Trunk ................................................. 256
Batteries....................................... 256
Windshield washer system and
headlamp cleaning system ........... 257
Tires and wheels ................................ 258
Important guidelines .................... 258
Tire care and maintenance ........... 259
Direction of rotation ..................... 261
Loading the vehicle ...................... 261
Recommended tire inflation
pressure ....................................... 267
Checking tire inflation pressure ... 268
Tire labeling .................................. 274
Load identification........................ 278
DOT, Tire Identification Number
(TIN) ............................................. 279
Maximum tire load ....................... 280Maximum tire inflation pressure .. 281
Uniform Tire Quality Grading
Standards (U.S. vehicles) ............. 281
Tire ply material ........................... 283
Tire and loading terminology ........ 284
Rotating tires ............................... 287
Anti-theft wheel nuts .................... 288
Winter driving .................................... 290
Winter tires* ................................ 290
Snow chains ................................. 291
Maintenance ...................................... 292
Clearing the maintenance
service indicator message............ 292
Maintenance service term
exceeded ..................................... 293
Calling up the maintenance
service due date........................... 293
Resetting the maintenance
service indicator........................... 294
Vehicle care ....................................... 295
Cleaning and care of the vehicle .. 295
Vehicle washing ........................... 296
Practical hints................................. 298
What to do if ... .................................. 300
Lamps in instrument cluster ........ 300
Lamp in center console................ 312
Vehicle status messages in the
multifunction display.................... 314
Symbol messages ........................ 327
Where will I find ...? ........................... 353
First aid kit ................................... 353
TIREFIT kit, electric air pump,
towing eye bolt and vehicle
literature portfolio ........................ 353
Compact guide (Canada only) ...... 354
Unlocking in an emergency ............... 355
Unlocking the vehicle................... 355
Replacing SmartKey batteries ........... 357
Replacing bulbs ................................. 359
Front lamps.................................. 360
Rear lamps ................................... 360
Replacing wiper blades ...................... 361
Removing wiper blades ................ 361
Installing wiper blades ................. 361

140 Controls in detail
Control system
Fuel consumption since last reset
Press button ÿ or è repeatedly
until you see the first function of the
trip computer menu.
Press button j or k repeatedly
until you see the following message in
the left multifunction display:
From reset.
1Distance driven since last reset
2Average speed since last reset
3Time elapsed since last reset
4Average fuel consumption since last
resetResetting fuel consumption statistics
Press button ÿ or è repeatedly
until you see the first function of the
trip computer menu.
Press button j or k repeatedly
until you see the reading that you want
to reset in the left multifunction
display.
Press and hold the reset button in the
instrument cluster (
page 114) until
the value is reset to
0.Distance to empty
Press button ÿ or è repeatedly
until you see the first function of the
trip computer menu.
Press button j or k repeatedly
until you see this message in the left
multifunction display:
Range.
The calculated remaining driving range
based on the current fuel tank level ap-
pears in the right multifunction display.
Your driving style will affect the
accuracy of the calculated range.
iThe fuel consumption statistics reset auto-
matically to
0 when either of the following values
is exceeded:

distance covered: 100 000 miles

time elapsed: 10 000 hours
iIf only very little fuel is left in the tank, a
vehicle at the fuel pump is shown instead of the
range.

247 Operation
At the gas station
At the gas station
Refueling
The fuel filler flap is located on the
right-hand side of the vehicle towards the
rear. Locking/unlocking the vehicle with
the SmartKey automatically locks/unlocks
the fuel filler flap.
Remove the SmartKey from the starter
switch.
Open the fuel filler flap by pushing at
the point indicated by arrow.
The fuel filler flap opens.
Turn fuel cap counterclockwise and
hold on to it until possible pressure is
released.
Take off cap and set it in the recess on
the fuel filler flap.
To prevent fuel vapors from escaping
into open air, fully insert filler nozzle
unit.
Only fill your tank until the filler nozzle
unit cuts out – do not top off or
overfill.
Replace fuel cap by turning it clockwise
until it audibly engages.
Warning!G
Gasoline is highly flammable and poisonous.
It burns violently and can cause serious
personal injury.
Never allow sparks, flame or smoking
materials near gasoline!
Turn off the engine before refueling.
Whenever you are around gasoline, avoid
inhaling fumes and skin contact, extinguish
all smoking materials.
Direct skin contact with fuels and the inha-
lation of fuel vapors can damage your
health.
iIn case that the central locking system does
not release the fuel filler flap, or the opening
mechanism is clamping, notify Roadside Assis-
tance or an authorized Mercedes-Benz Center.
iOnly use premium unleaded gasoline with a
minimum Posted Octane Rating of 91 (average
of 96 RON/86 MON). Information on gasoline
quality can normally be found on the fuel pump.
Warning!G
Overfilling of the fuel tank may create
pressure in the system which could cause a
gas discharge. This could cause the gas to
spray back out when removing the fuel
pump nozzle, which could cause personal
injury.


393 Technical data
Fuels, coolants, lubricants, etc.
Fuel requirements
Only use premium unleaded fuel:

The octane number (posted at the
pump) must be 91 min. It is an average
of both the Research Octane Number
(RON) and the Motor Octane Number
(MON): (RON+MON)/2. This is also
known as the ANTI-KNOCK INDEX.
Unleaded gasoline containing oxygenates
such as ethanol, IPA, IBA and TBA can be
used provided the ratio of any one of these
oxygenates to gasoline does not exceed
10%; MTBE must not exceed 15%.
The ratio of methanol to gasoline must not
exceed 3% plus additional cosolvents.
Using mixtures of ethanol and methanol is
not allowed. Gasohol, which contains
10% ethanol and 90% unleaded gasoline,
can be used.
These blends must also meet all other fuel
requirements, such as resistance to spark
knock, boiling range, vapor pressure, etc.
Gasoline additives
A major concern among engine
manufacturers is carbon build-up caused
by gasoline. Mercedes-Benz recommends
only the use of quality gasoline containing
additives that prevent the build up of
carbon deposits.
After an extended period of using fuels
without such additives, carbon deposits
can build up especially on the intake valves
and in the combustion area, leading to
engine performance problems such as:

Warm-up hesitation

Unstable idle

Knocking/pinging

Misfire

Power lossIn areas where carbon deposits may be
encountered due to lack of availability of
gasolines which contain these additives,
Mercedes-Benz recommends the use of
additives approved by us for use on
Mercedes-Benz vehicles. Refer to Factory
Approved Service Products pamphlet
(USA only) or contact an authorized
Mercedes-Benz Center for a listing of
approved product(s). Follow directions on
product label.
Do not blend other fuel additives with fuel.
This only results in unnecessary cost and
may be harmful to engine operation.
!Damage or malfunction resulting from poor
fuel quality or from blending additional fuel
additives other than those tested and approved
by us for use on Mercedes-Benz vehicles are not
covered by the Mercedes-Benz Limited
Warranty.
For a listing of approved products, refer to the
Factory Approved Service Products pamphlet
(USA only) or contact an authorized
Mercedes-Benz Center.

401 Technical terms
Instrument cluster
The displays and indicator/warning
lamps in the driver’s field of vision, in-
cluding the tachometer, speedometer,
engine temperature and fuel gauge.
Kickdown
Depressing the accelerator past the
point of resistance shifts the transmis-
sion down to the lowest possible. This
very quickly accelerates the vehicle
and should not be used for normal
acceleration needs.
Kilopascal (kPa)
(
page 285)
Maximum load rating
(
page 285)
Maximum loaded vehicle weight
(
page 285)
Maximum tire inflation pressure
(
page 285)MON
(M
otor Octane Number)
The Motor Octane Number for gasoline
as determined by a standardized
method. It is an indication of a gaso-
line's ability to resist undesired detona-
tion (knocking). The average of both
the MON (Motor Octane Number) and
RON (Research Octane Number) is
posted at the pump, also known as
ANTI-KNOCK INDEX.
Multifunction display
Two display fields in the instrument
cluster used to present information
provided by the control system.
Multifunction steering wheel
Steering wheel with buttons for
operating the control system.
Normal occupant weight
(
page 285)OCS
(O
ccupant Classification System)
The system automatically turns the
front passenger front air bag on or off
based on the classified occupant size
category determined by weight sensor
readings from the seat.
Overspeed range
Engine speeds within the red marking
on the tachometer dial. Avoid this
engine speed range, as it may result in
serious engine damage that is not
covered by the Mercedes-Benz Limited
Warranty.
Poly-V-belt drive
Drives engine-components (alternator,
AC compressor, etc.) from the engine.