2007 MERCEDES-BENZ SLK350 batterie

[x] Cancel search: batterie

Page 8 of 473

MERCEDES-BENZ SLK350 2007 R171 Owners Manual Contents
DOT, Tire Identification
Number (TIN) ...............................  322
Maximum tire load .......................  324
Maximum tire inflation pressure ..  324
Uniform Tire Quality Grading

Page 96 of 473

MERCEDES-BENZ SLK350 2007 R171 Owners Manual 95 Controls in detail
Locking and unlocking
Warning!G
When leaving the vehicle, always remove the 
SmartKey from the starter switch, take it 
with you, and lock the vehicle. Do not leave 
children una

Page 99 of 473

MERCEDES-BENZ SLK350 2007 R171 Owners Manual 98 Controls in detail
Locking and unlocking
Global locking
Press button‹.
With all doors and the trunk closed:
All turn signal lamps flash three 
times.
An acoustic warning sounds three 
times (i

Page 276 of 473

MERCEDES-BENZ SLK350 2007 R171 Owners Manual 275 Controls in detail
Useful features
Programming tips
If you are having difficulty programming 
the integrated remote control, here are 
some helpful tips:
Check the frequency of the hand-held 
rem

Page 304 of 473

MERCEDES-BENZ SLK350 2007 R171 Owners Manual 303 Operation
Engine compartment
Battery
Your vehicle’s battery is located in the en-
gine compartment.
The battery should always be sufficiently 
charged in order to achieve its rated ser-
vice lif

Page 346 of 473

MERCEDES-BENZ SLK350 2007 R171 Owners Manual 345 Practical hints
What to do if …
Where will I find...?
Unlocking/locking in an emergency
Opening/closing in an emergency
Replacing SmartKey batteries
Replacing bulbs
Replacing wiper blades
Flat t

Page 392 of 473

MERCEDES-BENZ SLK350 2007 R171 Owners Manual 391 Practical hints
Replacing SmartKey batteries
Replacing SmartKey batteries
If the batteries in the SmartKey are 
discharged, the vehicle can no longer be 
locked or unlocked. It is recommended 
to

Page 393 of 473

MERCEDES-BENZ SLK350 2007 R171 Owners Manual 392 Practical hints
Replacing SmartKey batteries
3Batteries
4Contact springs
Pull out batteries 3.
Using a lint-free cloth, insert new 
batteries3 under contact springs4 
with the positive terminal
Page:   1-8 9-16 next >