2007 MERCEDES-BENZ SLK CLASS service indicator

Contents
DOT, Tire Identification
Number (TIN) ............................... 322
Maximum tire load ....................... 324
Maximum tire inflation pressure .. 324
Uniform Tire Quality Grading
Standards (U.S. vehicles) ............. 325
Tire ply material ........................... 327
Tire and loading terminology ........ 327
Rotating tires ............................... 330
Winter driving .................................... 332
Winter tires .................................. 332
Snow chains................................. 333
Maintenance ...................................... 334
Maintenance service indicator
message....................................... 334
Clearing the maintenance
service indicator message............ 335
Maintenance service term
exceeded ..................................... 335
Calling up the maintenance
service indicator display............... 335
Resetting the maintenance
service indicator........................... 336
Vehicle care ....................................... 337
Cleaning and care of vehicle ........ 337
Practical hints.................................. 345
What to do if … ................................... 346
Lamps in instrument cluster ......... 346
Lamp in center console................. 354
Vehicle status messages in the
multifunction display..................... 356
Where will I find...? ............................. 382
First aid kit .................................... 382
Vehicle tool kit, vehicle jack ......... 382
Spare wheel with collapsible tire .. 385
Spare wheel bolts ......................... 386
Unlocking/locking in an emergency... 387
Unlocking the vehicle.................... 387
Locking the vehicle ....................... 388
Manually unlocking the gear
selector lever
(automatic transmission*) ............ 389
Opening/closing in an emergency ..... 390
Raising retractable hardtop
manually ....................................... 390
Replacing SmartKey batteries ............ 391
SmartKey ...................................... 391Replacing bulbs .................................. 393
Bulbs............................................. 393
Replacing bulbs for front lamps .... 396
Replacing bulbs for rear lamps ..... 397
Replacing wiper blades ...................... 399
Placing wiper arms in vertical
position......................................... 399
Removing wiper blades ................. 400
Installing wiper blades .................. 400
Flat tire............................................... 401
Preparing the vehicle .................... 401
Sealing tires with TIREFIT ............. 401
Mounting the spare wheel ............ 407
MOExtended system* ................... 414
Battery ............................................... 415
Disconnecting the battery ............ 416
Removing the battery ................... 417
Charging and reinstalling battery .. 417
Reconnecting the battery ............. 418
Jump starting...................................... 419
Towing the vehicle.............................. 421
Installing towing eye bolt .............. 422
Fuses.................................................. 425
Fuse box in passenger
compartment ................................ 425
Fuse box in engine compartment . 426

71 Safety and Security
Occupant safety
Occupant Classification System
The O
ccupant Classification System (OCS)
automatically turns the passenger front air
bag and passenger-side knee bag on or off
based on the classified occupant weight
category determined by weight sensor
readings from the passenger seat.
Occupants must sit properly belted in a
position that is as upright as possible with
their back against the seat backrest and
feet on the floor to be correctly classified.
If the occupant's weight is transferred to
another object in the vehicle (e.g. by
leaning on armrests), the OCS may not be
able to properly approximate the
occupant’s weight category. Both driver and the passenger should al-
ways use the 75 indicator
lamp as an indication of whether or not the
passenger is properly positioned
(
page 76).
Warning!G
Only use seat covers which have been
tested and approved by Mercedes-Benz for
your vehicle model. Using other seat covers
may interfere with or prevent the deploy-
ment of the head-thorax air bags. Contact
an authorized Mercedes-Benz Center for
availability.
iThe system does not deactivate the
head-thorax air bag and the emergency tension-
ing device.
iIf the seat, including the trim cover and
cushion needs to be serviced in any way, take
the vehicle to an authorized Mercedes-Benz
Center.
Only seat accessories approved by
Mercedes-Benz may be used.

91 Safety and Security
Anti-theft systems
Arming the alarm system
Lock your vehicle with the SmartKey.
The turn signal lamps flash three times
and an acoustic warning sounds three
times (if equipped and feature
activated) to indicate that the alarm
system is armed.
The indicator lamp in the central lock-
ing switch starts flashing (
page 103).Disarming the alarm system
Unlock your vehicle with the SmartKey.
The turn signal lamps flash once and
an acoustic warning sounds once (if
equipped and feature activated) to
indicate that the alarm system is
disarmed.
Canceling the alarm
To cancel the alarm:
Press theŒ or‹button on the
SmartKey.
or
Insert the SmartKey in the starter
switch.
Tow-away alarm
Once the tow-away alarm is armed, a visual
and audible alarm will be triggered when
someone attempts to raise the vehicle.
iIf the turn signal lamps do not flash three
times and no acoustic warning sounds three
times (though equipped and feature activated), a
door or the trunk lid may not be properly closed:
Close the respective element and lock the
vehicle again.
iThe tow-away protection alarm is triggered,
for example, if the vehicle is lifted on one side.
If the alarm stays on for more than 30 seconds,
a call to the Response Center is initiated auto-
matically by the Tele Aid* system (
page 261),
provided Tele Aid* service was subscribed to
and properly activated, and that necessary cellu-
lar service and GPS coverage are available
(
page 261).

121 Controls in detail
Control system
Control system
The control system is activated as soon as
the SmartKey in the starter switch is
turned to position1. The control system
enables you to

call up information about your vehicle

change vehicle settings
For example, you can use the control
system to find out when your vehicle is
next due for service, to set the language
for messages in the instrument cluster
display, and much more.
The control system relays information to
the multifunction display.
Multifunction display
1Main odometer
2Trip odometer
3Current program mode
(automatic transmission* only)
4Status indicator (outside
temperature/digital speedometer)
5Current gear selector lever posi-
tion/gear range
(automatic transmission* only)
iThe displays for the audio systems (radio,
CD player) will appear in English, regardless of
the language selected.
Warning!G
A driver’s attention to the road and traffic
conditions must always be his/her primary
focus when driving.
For your safety and the safety of others, se-
lecting features through the multifunction
steering wheel should only be done by the
driver when traffic and road conditions
permit it to be done safely.
Bear in mind that at a speed of just
30 mph (approximately 50 km/h), your
vehicle is covering a distance of
44 feet (approximately 14 m) every second.

125 Controls in detail
Control system
Menus, submenus and functions
Table continued on next page.
Menu1Menu2Menu3Menu4
Standard displayAMG1AUDIONAV*
(page 127)(page 128)(page 133)(page 135)
Commands/submenus
Run Flat Indicator*Engine oil temperatureSelecting radio stationShow route guidance
instructions, current direction
traveled
Checking coolant temperatureVehicle supply voltageSelecting satellite radio
station* (USA only)
Digital speedometer/outside
temperatureRACETIMEROperating the CD player
Calling up maintenance
service indicatorOverall analysis
Checking engine oil level
(SLK 55 AMG only)Lap analysis
1AMG vehicles only.

127 Controls in detail
Control system
Standard display menu
The multifunction display shows the main
odometer and trip odometer. This default
setting is referred to as the standard
display.
1Main odometer
2Trip odometer
If another display is shown instead of the
standard display:
Press buttonèorÿ repeatedly
until the standard display appears in
the multifunction display.
Press buttonk orj to select
the functions in the standard display
menu.The following functions are available:Checking coolant temperature
FunctionPage
Run Flat Indicator*315
Checking coolant temperature127
Displaying digital speedometer
or outside temperature128
Calling up maintenance service
indicator334
Checking engine oil level
(SLK 55 AMG only)296
Warning!G

Driving when your engine is overheated
can cause some fluids which may have
leaked into the engine compartment to
catch fire. You could be seriously
burned.

Steam from an overheated engine can
cause serious burns and can occur just
by opening the hood. Stay away from
the engine if you see or hear steam com-
ing from it.
Stop the vehicle in a safe location away from
other traffic. Turn off the engine, get out of
the vehicle and do not stand near the vehicle
until the engine has cooled down.

264 Controls in detail
Useful features
A voice connection between the Response
Center and the occupants of the vehicle
will be established automatically soon af-
ter the emergency call has been initiated.
The Response Center will attempt to deter-
mine more precisely the nature of the
emergency provided they can speak to an
occupant of the vehicle.
The Tele Aid system is available if:

it has been activated and is operation-
al. Activation requires a subscription
for monitoring services, connection
and cellular air time.

the relevant cellular phone network
and GPS signals are available and pass
the information on to the Response
Center.Initiating an emergency call manually
1Cover
2SOS button
Briefly press on cover1.
The cover opens.iLocation of the vehicle on a map is only
possible if the vehicle is able to receive signals
from the GPS satellite network and pass the
information on to the Response Center.
Warning!G
If the indicator lamp in the SOS button is
flashing continuously and there was no
voice connection to the Response Center
established, then the Tele Aid system could
not initiate an emergency call (e.g. the rele-
vant cellular phone network is not available).
The message
Call failed appears in the
multifunction display for approximately
10 seconds.
Should this occur, assistance must be sum-
moned by other means.

266 Controls in detail
Useful features
Press and hold button 1 (for longer
than 2 seconds).
A call to a Mercedes-Benz Roadside
Assistance dispatcher will be initiated.
The button will flash while the call is in
progress. The message
Connecting
call
will appear in the multifunction
display and the audio system is muted.
When the connection is established, the
message
Call connected appears in the
multifunction display. The Tele Aid system
will transmit data generating the vehicle
identification number, model, color and lo-
cation (subject to availability of cellular
and GPS signals).
A voice connection between the Roadside
Assistance dispatcher and the occupants
of the vehicle will be established.
Describe the nature of the need for
assistance.The Mercedes-Benz Roadside Assistance
dispatcher will either dispatch a qualified
Mercedes-Benz technician or arrange to
tow your vehicle to the nearest
Mercedes-Benz Center. For services such
as labor and/or towing, charges may ap-
ply. Refer to the Roadside Assistance man-
ual for more information.
The following is only available in the USA:

Sign and Drive services: Services such
as jump start, a few gallons of fuel or
the replacement of a flat tire with the
vehicle spare tire are obtainable.
iThe indicator lamp in the Roadside
Assistance button• remains illuminated in
red for approximately 10 seconds during the
system self-check after switching on ignition
(together with the SOS button and the
Information button¡).
See “System self-check” (
page 263) when the
indicator lamp does not come on in red or stays
on longer than approximately 10 seconds.
If the indicator lamp in the Roadside Assistance
button• is flashing continuously and there
was no voice connection to the Response Center
established, then the Tele Aid system could not
initiate a Roadside Assistance call (e.g. the rele-
vant cellular phone network was not available).
The message
Call failed appears in the mul-
tifunction display.
Roadside Assistance calls can be terminated us-
ing the buttont on the multifunction steer-
ing wheel or the respective button for ending a
telephone call on the audio system or COMAND*
head unit.