2007 MERCEDES-BENZ ML350 phone cradle

306 Controls in detailUseful featuresWhen the mobile phone is inserted in the
cradle, you can operate the telephone us-
ing the following devices:

mobile phone keypad


COMAND system (see separate operat-
ing instructions)


buttonss andt on the steering
wheel (
page 148)


Voice Control* (see separate operating
instructions)
Please note that these functions are only
available with Mercedes-Benz approved
mobile phones. Please contact an autho-rized Mercedes-Benz Light Truck Center
for information on features available for
your mobile phone of choice.
The cradle is located in the front center
armrest.

Open telephone compartment
(page 296).
Inserting mobile phone in mobile phone
cradle
Once the mobile phone has been inserted
in the mobile phone cradle, you have to
use the hands-free device to respond dur-
ing phone calls.

If applicable, remove the cover for the
external antenna connection from the
back of the mobile phone and store it in
a s a f e p l a c e . B e s u r e t o c o m p l y w i t h t h e
mobile phone’s operating instructions
as well.
Example illustration1Insert the mobile phone
2Connector contact
3Mobile phone cradle
Slide the lower end of the mobile phone
into connector contact2 on
cradle3.

Push the top of the mobile phone in di-
rection of arrow1, until the lug on the
mobile phone release button engages.
The mobile phone is connected to the
network via the external antenna.
i
Various mobile phone cradles can be in-
stalled in the front center armrest, see separate
installation instructions for the mobile phone
cradle. These mobile phone cradles can be ob-
tained from an authorized Mercedes-Benz Light
Truck Center.
The functions and services available to you while
using the mobile phone depend on your service
provider and the type of mobile phone you are
using. See also separate operating manual for in-
structions on how to use your mobile phone.
!
Do not try to remove the mobile phone along
with the cradle. You could otherwise damage the
mobile phone cradle.

307 Controls in detail
Useful features
The mobile phone is linked to the
hands-free device and the multifunc-
tion steering wheel.
The battery is charged depending on its
charge status and the position of the
SmartKey in the starter switch. The
charge procedure will be indicated in
the mobile phone’s display.
You can place or receive phone calls. You
can control other functions of the mobile
phone via the control system (
page 182)
or COMAND system or Voice Contro*, see
separate operating instructions.Removing mobile phone from mobile
phone cradle
Example illustration1Release catch for mobile phone
2Mobile phone cradle
Press release catch in direction of
arrow1 and take mobile phone out of
mobile phone cradle2.Changing mobile phone cradle
If you require a different cradle for your
mobile phone, remove the present cradle
before installing a new one.
Removing an existing mobile phone
cradle
Example illustration1To release the mobile phone cradle
2To remove the mobile phone cradle
3Mobile phone cradle
i
When you take the SmartKey or SmartKey
with KEYLESS-GO* out of the starter switch, the
mobile phone remains switched on for approx.
10 minutes. If you place or receive a call during
this time, the mobile phone switches off
10 minutes after the call has been completed.
i
When using a flip-style mobile phone, open
flip top before removing from the cradle while a
call is connected. Otherwise, the call will be dis-
connected.


308 Controls in detailUseful features
Press release button in direction of
arrow1 and take mobile phone
cradle3 out in direction of arrow2.
Installing a different mobile phone cra-
dle
Example illustration1Contact plate
2Recesses
3Mobile phone cradle
Insert mobile phone cradle3 into
recesses2 of contact plate1.

Push mobile phone cradle3 forward
until it engages.
Tele Aid*
Shortly after the completion of your
Tele Aid acquaintance call, you will receive
a user ID and password. By visiting
www.mbusa.com and selecting “Tele Aid”
(USA only), you will have access to account
information, remote door unlock and
more.The Tele Aid system
(Tele
matic A
larm I
dentification on
D
emand)
The Tele Aid system consists of three
types of response:

automatic and manual emergency


roadside assistance


information
The Tele Aid system is operational provid-
ing that the vehicle’s battery is charged,
properly connected, not damaged and cel-
lular and GPS coverage is available.
The speaker volume of a Tele Aid call can
be adjusted by using the volume control on
the COMAND system or on the multifunc-
tion steering wheel. To raise, turn the rota-
ry volume control on COMAND system
clockwise or press buttonæ on the
multifunction steering wheel. To lower,
turn the rotary volume control on
COMAND system control counterclock-
wise or press buttonç on the multi-
function steering wheel.
!
The initial activation of the Tele Aid system
may only be performed by completing the sub-
scriber agreement and placing an acquaintance
call using the ¡button. Failure to complete
either of these steps will result in a system that
is not activated.
If you have any questions regarding activation,
please call the Response Center at
1-800-756-9018 (in the USA) or
1-888-923-8367 (in Canada).


309 Controls in detail
Useful features

To activate, press the SOS button, the
Roadside Assistance button• or
the Information button¡, depend-
ing on the type of response required.System self-check
Initially, after switching on the ignition,
malfunctions are detected and indicated
(the indicator lamps in the SOS button, the
Roadside Assistance button• and the
Information button¡ stay on longer
than 10 seconds or do not come on).
The message
Tele Aid
– inoperative
appears in the multifunction display.
i
The SOS button is located in the overhead
control panel (
page 33).
The Roadside Assistance button•
(
page 312) and the Information button¡
(page 313) are located below the center arm-
rest cover.
!
The Tele Aid system utilizes the cellular
network for communication and the GPS (G
lobal
P
ositioning S
ystem) satellites for vehicle loca-
tion. If either of these signals are unavailable, the
Tele Aid system may not function and if this
occurs, assistance must be summoned by other
means.
i
When a Tele Aid call has been initiated, the
COMAND system audio is muted and the select-
ed mode (radio, CD etc.) pauses. The optional
cellular phone (if installed) inserted in cradle
switches off. If you must use this phone, we rec-
ommend that you use it only with the vehicle at a
standstill in a safe location. Remove the phone
from the cradle and place the call. The naviga-
tion* system (if engaged) will continue to run.
The display in the instrument cluster is available
for use, and spoken commands are only avail-
able by pressing the RPT button on the COMAND
system. A pop-up window will appear in the
COMAND system display to indicate that a Tele
Aid call is in progress. After the TeleAid call has
ended, the optional cellular phone inserted in the
cradle switches on again. A PIN entry might be
necessary.

572 IndexT
Tachometer 29, 146
Overspeed range 146
Tail lamps 490
Cleaning lenses 408
Messages in the
multifunction display 462
Replacing bulbs 483, 491
Tailgate
Closing 121
Closing from the inside,
Electrically* 121
Closing from the outside
(vehicles without
KEYLESS-GO*) 123
Opening 119
Opening from the inside,
Electrically* 119
Opening from the outside 119
Unlocking and opening the tailgate in
an emergency 476
Unlocking and opening with
KEYLESS-GO*, Power
tailgate* 117
Unlocking and opening with SmartKey,
Power tailgate* 111Tar stains 405
Technical data 527
Air conditioning refrigerant 546
Brake fluid 544, 546
Capacities fuels, coolants, lubricants
etc. 543, 544
Coolant 549
Dimensions, Vehicle 541
Electrical system 540
Engine 534
Engine oil 546
Engine oil additives 546
Fuel requirements 548
Fuels, coolants, lubricants, etc. 543
Gasoline additives 547
Main dimensions 541
Premium unleaded gasoline 547
Rims 536
Tires 536
Weights 542
Windshield washer and headlamp
cleaning system* 545
Windshield washer and headlamp
cleaning* system 551Tele Aid* 308
Call priority 314
Emergency calls 310
Hands-free microphone 33
Information 313
Initiating an emergency call
manually 311
Messages in the
multifunction display 464
Remote door unlock 315
Roadside Assistance 312
SOS button 311
Stolen Vehicle Recovery
services 315
System self-check 309
Telephone cradle*
Changing 307

573 Index
Telephone* 305
Answering/ending a call 183
Changing mobile phone cradle 307
Dialing a number from the phone
book 183
Ending a call 183
Hands-free microphone 33
Inserting in cradle 306
Installing a different mobile phone
cradle 308
Messages in the
multifunction display 464
Operation 182
Phone book 183
Redialing 184
Removing from cradle 307
Telescoping rod 292Temperature
Coolant 154
Display mode, Status indicator 168
Interior temperature 211
Interior temperature, setting see
Climate control or Automatic climate
control (3-zone)*
Outside temperature 155
Sensor, Interior temperature 208,
222
Sensor, Outside temperature 146
Setting display unit 155
Tether attachment points, see Children in
the vehicle
Three-zone Automatic climate control see
Automatic climate control (3-zone) *
Ticket holder 299
Tie-down rings 283
Tightening torque
Wheel bolts 504
Tilt/sliding sunroof* see Power tilt/sliding
sunroof*
Time 169
TIN 389, 396Tire and Loading Information
Placard 369
Terminology 394
Tire Identification Number see TIN
Tire inflation pressure
Checking manually 375
Checking tire pressure electronically
with the Advanced Tire Pressure
Monitoring System (Advanced
TPMS)*, (Canada only) 381
Checking tire pressure electronically
with the Tire Pressure Monitoring
System (TPMS), (USA only) 379
Recommended tire inflation
pressure 374