2007 MERCEDES-BENZ GL450 language

155 Controls in detail
Instrument cluster
Instrument cluster
For a full view illustration of the instrument
cluster, see “Instrument cluster”
(
page 26).
1To dim instrument cluster illumination
2Reset button
3To brighten instrument cluster
illumination
The instrument cluster is activated when
you

open a door

switch on the ignition (page 42)

press reset button2

switch on the exterior lamps
(
page 145)For information on changing the instru-
ment cluster settings, e.g. the language,
see “Instrument cluster submenu”
(
page 174).Adjusting instrument cluster illumina-
tion
Use button1 or3 to adjust the illumina-
tion brightness for the instrument cluster.
To brighten illumination
Press and hold button3 until the
desired level of illumination is reached.
To dim illumination
Press and hold button1 until the
desired level of illumination is reached.
iOpening a front door or pressing the reset
button without switching on the ignition or the
exterior lighting activates the multifunction
display illumination only for 30 seconds.
Warning!G
No messages will be displayed if either the
instrument cluster or the multifunction
display is inoperative.
As a result, you will not be able to see infor-
mation about your driving conditions, such
as speed or outside temperature, warn-
ing/indicator lamps, malfunction/warning
messages or the failure of any systems.
Driving characteristics may be impaired.
If you must continue to drive, do so with
added caution. Contact an authorized
Mercedes-Benz Light Truck Center as soon
as possible.
iThe instrument cluster illumination is
dimmed or brightened automatically to suit am-
bient light conditions.
The instrument cluster illumination will also be
adjusted automatically when you switch on the
vehicle’s exterior lamps.
iWith the exterior lighting switched on, the
brightness of the switches in the center console
will also be adjusted when using button
1 or3.

157 Controls in detail
Control system
Control system
The control system is activated as soon as
the SmartKey in the starter switch is
turned to position1 (
page 42) or as
soon as the KEYLESS-GO start/stop but-
ton* is in position1 (
page 44). The con-
trol system enables you to

call up information about your vehicle

change vehicle settings
For example, you can use the control sys-
tem to find out when your vehicle is next
due for maintenance service, to set the
language for messages in the instrument
cluster display, and much more.
The control system relays information to
the multifunction display.
Multifunction display
1Trip odometer
2Main odometer
3Transmission position indicator
4Status indicator (outside temperature
or digital speedometer)
For more information on menus displayed
in the multifunction display, see “Menus”
(
page 160).
Warning!G
A driver’s attention to the road and traffic
conditions must always be his/her primary
focus when driving.
For your safety and the safety of others, se-
lecting features through the multifunction
steering wheel should only be done by the
driver when traffic and road conditions per-
mit it to be done safely.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 14 m) every second.

173 Controls in detail
Control system
The table below shows what settings can
be changed within the various menus.
Detailed instructions on making individual
settings can be found on the following
pages.
INSTRUMENT CLUSTERTIME/DATELIGHTINGVEHICLECOMFORT*
(page 174)(page 176)(page 178)(page 181)(page 184)
Selecting speedometer
display modeSetting the time (hours)Setting daytime running
lamp mode (USA only)Compass adjustmentActivating
easy-entry/exit fea-
ture*
Selecting languageSetting the time (minutes)Setting locator lightingCompass calibrationSetting fold-in func-
tion* for exterior rear
view mirrors
Selecting display (digital
speedometer or outside
temperature) for status in-
dicatorSetting the date (month)Setting night security
illuminationAudio search function
Setting the date (day)Setting interior lighting de-
layed shut-offSetting automatic
locking
Setting the date (year)Limiting opening
height of tailgate*

174 Controls in detail
Control system
Instrument cluster submenu
Access the
Instr. cluster submenu via
the
Settings menu. Use the Instr.
cluster
submenu to change the instru-
ment cluster display settings.
The following functions are available:Selecting speedometer display mode
Move the selection marker with
buttonæ orç to the
Instr.
cluster
submenu.
Press buttonj ork repeatedly
until the message
Display unit
Digital speedometer
appears in the
multifunction display.
The selection marker is on the current
setting.
Press buttonæ or ç to set
speedometer unit to
km or miles.Selecting language
Move the selection marker with
buttonæ orç to the
Instr.
cluster
submenu.
Press buttonj ork repeatedly
until the message
Language appears in
the multifunction display.
The selection marker is on the current
setting.
Press buttonæ orç to select
the language to be used for the
multifunction display messages.
FunctionPage
Selecting speedometer display
mode174
Selecting language174
Selecting display (digital
speedometer or outside
temperature) for status indica-
tor175
iIf you select a language that is not available
in the COMAND system, the messages for the
audio systems, such as radio or CD player, will
appear in English, regardless of the language
selected. For more information see separate
COMAND operating instructions.

175 Controls in detail
Control system
Available languages:

German

English

French

Italian

Spanish

Dutch

Swedish

Danish

Turkish

Portuguese

Russian (Canada only)Selecting display (digital speedometer
or outside temperature) for status
indicator
Move the selection marker with
buttonæ orç to the
Instr.
cluster
submenu.
Press buttonj ork repeatedly
until the message
Status line
display
appears in the multifunction
display.
The selection marker is on the current
setting.
Press buttonæ orç to select
the desired setting.
The selected display is then shown
continuously in the status indicator
(lower display).
The other display now appears in the
menu of the standard display
(
page 164):

Digital speedometer
or

Outside temperature

578 Index
Headlamps
Automatic headlamp mode 146
Bi-Xenon* 481, 512
Cleaning lenses 429
Cleaning system* 210, 384
Halogen 511
High beam see High beam flasher
High beam see High beam headlamps
Light sensor, Messages in the
multifunction display 483
Low beam see Low beam headlamps
Manual headlamp mode 146
Messages in the
multifunction display 481, 482,
483, 484, 485, 486
Replacing bulbs 508, 509
Switch 62, 145
Heated seats see Seat heating*
Heated steering wheel* 328
Height adjustment
Vehicle level control
(Vehicles with Air suspension
package) 283
Vehicle level control
(Vehicles with enhanced Off-road
Package*) 285High beam flasher 63, 149
High beam headlamps
Indicator lamp 29
Messages in the
multifunction display 482
Replacing bulbs 509, 511, 512
Switching on 63, 149
High mounted brake lamp 509
Hill start assist system 199
Hinged quarter windows* see
Power windows
Hood 379
Messages in the
multifunction display 478
Opening 379
Hooks
Loading 306
Horn 25
HVAC see Climate control or
automatic climate control (3-zone)*
Hydroplaning 354I
Identification labels see Labels
Ignition 42, 44, 59
Immobilizer 111
Indicator lamps see Lamps, Indicator and
warning
Infant and child restraint systems see
Children in the vehicle
Inflation pressure see Tires,
Inflation pressures
Information button see Tele Aid
Infrared reflecting windshield* 345
Inside door handle 122
Instrument cluster 26, 28, 155
Illumination brightness 155
Lamps 436
Messages in display see Multifunction
display messages
Multifunction display 157
Outside temperature indicator 156
Selecting language 174
Instrument lighting see Instrument cluster,
Illumination brightness
Instrument panel see Instrument cluster

580 Index
Kickdown 198
Kilopascal 416
L
Labels 550
Certification 550
Emission control information 551
Engine number 551
Paintwork code 550
Vacuum line routing diagram 551
Vehicle Identification Number
(VIN) 550
Lamp sensor see Light sensor
Lamps, exterior 509
Front 509
Light sensor, Messages in the
multifunction display 483
Messages in display 481
Messages in the multifunction
display 481, 483, 485
Rear 509
Switch 145Lamps, indicator and warning
ABS 27, 436
Adaptive Damping System
(ADS)* 281
Alarm system 112
Battery (SmartKey with
KEYLESS-GO*) 121
Battery (SmartKey) 116
Brakes 27, 437, 438
Center console 31, 32, 448
CHECK ENGINE 29, 439, 440
Differential locks* 207
Distance warning lamp* 265
Downhill Speed Regulation 276
Engine diagnostics 29, 439, 440
ESP® 27, 441, 442
Fog lamps, Front/rear 145
Front passenger front air bag off 31,
32, 80, 87, 450
Fuel reserve 29, 442
High beam headlamps 29
Instrument cluster 26, 28, 436, 437,
438, 439, 440, 441, 442, 443, 444,
445, 446
Off-road driving program 280
Parktronic* 292Preglow indicator, Diesel engine 29
Seat belt telltale 29, 91, 443
Seat belts 444
Seat heating* 140
Seat ventilation* 142
SRS 29, 74, 91, 445
Turn signals 27
Vehicle level control 283, 285
Language, Setting 174
LATCH-type child seat anchors see
Children in the vehicle
Layout of poly-V-belt drive (GL 450) 552
Layout of poly-V-belt drive
(GL 320 CDI) 552
Leather upholstery*, Cleaning and
care of 434
Lever for cruise control 257
License plate lamps 518
Messages in the
multifunction display 483
Replacing bulbs 509, 518
Light alloy wheels, Cleaning 432
Light sensor
Messages in the
multifunction display 483
Lighter see Cigarette lighter*

581 Index
Lighting, Exterior and interior 145
Limp-Home Mode 202, 439, 440
Loading see Vehicle loading
Locator lighting 148, 179
Lock buttons, KEYLESS-GO*
Outside door handle 72
Locking the vehicle see Key
Loss of keys, Mechanical key 122
Loss of keys, SmartKey 122
Loss of keys, SmartKey with
KEYLESS-GO* 122
Loss of Service and Warranty Information
Booklet 549
Low beam headlamps
Messages in the
multifunction display 483
Replacing bulbs 509
Switching on 62, 145
LOW RANGE mode* 203
Messages in the
multifunction display 493, 494
Lubricants 560
Lumbar support 139M
Main dimensions 558
Maintenance 12, 422
Calling up service indicator
display 424
Clearing service indicator
message 423
Maintenance System 422
Resetting service indicator 424
Service indicator message 422
Service term exceeded 423
Maintenance System 422
Manual headlamp mode see Headlamps
Maximum cooling, MAXCOOL* see
Automatic climate control
(3-zone)* 239
Maximum load rating, Tires 417
Maximum loaded vehicle weight,
Tires 417
MB Tex upholstery, Cleaning and
care of 434
Mechanical key 500Memory function* see Seats
Menus see Control system menus
Messages in display see Multifunction
display messages
Microphone, Hands-free 34
Minispare wheel see Spare wheel
Mirrors
Adjusting 52
Auto-dimming rear view
mirrors* 211
Exterior rear view mirror 52
Interior rear view mirror 52, 210
MON 376, 563
Multicontour seat* 140
Multifunction display 157
Changing settings see Control system
menus and Control system sub-
menus
Displaying current gear range 200
Selecting display 175
Selecting language 174