337 Controls in detail
Useful features
Information button¡
The Information button¡ is located
below the center armrest cover.
1Information button¡
Open the storage tray (page 318).
Press and hold button1 (for longer
than 2 seconds).
A call to the Customer Assistance
Center will be initiated. The button will
flash while the call is in progress. The
message
Connecting call will appear
in the multifunction display.When the connection is established, the
message
Call connected appears in the
multifunction display. The Tele Aid system
will transmit data generating the vehicle
identification number, model, color and lo-
cation (subject to availability of cellular
and GPS signals).
A voice connection between the Customer
Assistance Center representative and the
occupants of the vehicle will be estab-
lished. Information regarding the operation
of your vehicle, the nearest
Mercedes-Benz Light Truck Center or
Mercedes-Benz USA products and servic-
es is available to you.
For more details concerning the Tele Aid
system, please visit www.mbusa.com and
use your ID and password (sent to you sep-
arately) to learn more (USA only).iThe indicator lamp on the Roadside
Assistance button• remains illuminated in
red for approximately 10 seconds during the
system self-check after switching on the ignition
(together with the SOS button and the Informa-
tion button¡).
See system self-check (
page 333) if the indi-
cator lamp does not come on in red or stays on
longer than approximately 10 seconds.
If the indicator lamp on the Roadside Assistance
button• is flashing continuously and there
was no voice connection to the Response Center
established, then the Tele Aid system could not
initiate a Roadside Assistance call (e.g. the rele-
vant cellular phone network was not available).
The message
Call failed appears in the mul-
tifunction display.
Roadside Assistance calls can be terminated us-
ing thet button on the multifunction steer-
ing wheel or the END Button on the COMAND
system.
iWhile the call is connected, you can change
to the navigation menu by pressing the NAV
button on the COMAND system.
436 Practical hints
What to do if …
Lamps in instrument clusterGeneral information:
If any of the following lamps in the instru-
ment cluster fails to come on during thebulb self-check when switching on the
ignition, have the respective bulb checked
and replaced if necessary.
ProblemPossible cause/consequenceSuggested solution
-The yellow ABS indicator lamp
comes on while the engine is
running.ABS has detected a malfunction and has
switched off. The BAS, ESP®, EBP and 4-ETS
are also switched off (see messages in multi-
function display).
The brake system is still functioning normally
but without the ABS available.
If the ABS control unit is malfunctioning,
other systems such as the navigation
system* or the automatic transmission may
also be malfunctioning.
Continue driving with added caution.
Wheels may lock during hard braking,
reducing steering capability.
Read and observe messages in the
multifunction display (
page 451).
Have the system checked at an
authorized Mercedes-Benz Light
Truck Center as soon as possible.
Failure to follow these instructions
increases the risk of an accident.
The charging voltage has fallen below
10 volts. The ABS has switched off.
The battery might not be charged sufficiently.When the voltage is above this value
again, the ABS is operational again and
the ABS indicator lamp should go out.
If the ABS indicator lamp does not go out:
Have the generator (alternator) and
the battery checked.
582 Index
Multifunction display messages 451
ABS 453
Air suspension 490
Air suspension package* 490
Brake fluid 472
Brake lamps 481
Brake pads 470
Check engine 472
Coolant 475
Cruise control 454
Distronic* 455
Doors 478
Downhill Speed Regulation 470
EBP 471
Engine coolant 473, 475
Engine oil 476
ESP® 441
Fog lamps, Front 481
Fog lamps, Rear 484
Front passenger front air bag 463,
464, 465, 466
Fuel cap 478
Gear selector lever 461
Headlamps 481, 483, 484, 486
Hood 478Key, SmartKey 480
Key, SmartKey with
KEYLESS-GO* 479, 480
Lamps 481, 483, 484, 486
Low tire pressure 467, 488, 489
Parking brake 461, 471
Parking lamps 482
Tele Aid 487
Telephone* 487
Turn signals 486
Vehicle battery 469
Windshield washer fluid 487
Multifunction steering wheel 30, 158
Button operation 158
N
Navigation system* 168
See separate COMAND System
operating instructions
Net, Cargo* 313
Net, Parcel 320
Neutral gear position, Automatic
transmission 192
New vehicle, Break-in period 348
Night security illumination 148, 179
Normal occupant weight 417
Number, Vehicle Identification (VIN) 550O
Occupant distribution 417
Occupant safety 74
Active head restraint 92
Air bags 76
Children and air bags 77, 93, 96
Children in the vehicle 93
Fastening the seat belt 54
Front passenger front air bag off
indicator lamp 82, 85, 86
Infant and child restraint systems 94
LATCH-type child seat anchors 97
OCS* 81
OCS*, Messages in the multifunction
display 463, 464, 465, 466
Seat belts 54, 78
OCS* 81
Self-test 86
Odometer 156, 157, 164
