455 Practical hints
Flat tire
Removing the wheel
1Alignment bolt
Unscrew upper-most wheel bolt and re-
move.
Replace this wheel bolt with alignment
bolt1 supplied in the tool kit.
Remove the remaining bolts.
Remove the wheel.Mounting the spare wheel
Clean contact surfaces of wheel and
wheel hub.
Guide the spare wheel onto the align-
ment bolt and push it on.
Warning!
G
The jack is intended only for lifting the
vehicle briefly for wheel changes. It is not
suited for performing maintenance work
under the vehicle.
Never start the engine when the vehicle
is raised.
Never lie down under the raised vehicle.
!
Do not place wheel bolts in sand or dirt. This
could result in damage to the bolt and wheel hub
threads.
!
To avoid paint damage, place wheel flat
against hub and hold it there while installing first
wheel bolt.
Warning!
G
Always replace wheel bolts that are dam-
aged or rusted.
Never apply oil or grease to wheel bolts.
Damaged wheel hub threads should be re-
paired immediately. Do not continue to drive
under these circumstances! Contact an au-
thorized Mercedes-Benz Center or call
Roadside Assistance.
Incorrect wheel bolts or improperly tight-
ened wheel bolts can cause the wheel to
come off. This could cause an accident. Be
sure to use the correct wheel bolts.
519 Index
Washer reservoir level 500
Washing the vehicle 369
Wear pattern, Tires 363
Weight, Vehicle 490
Wheel
Change 452
Removing 455
Spare 455
Tightening torque 458
Wheels, Sizes 482
Wheels, Tires and 333
Window curtain air bags 75
Windows see Power windows 237
Windows, cleaning 374
Windshield
Cleaning 59
Cleaning wiper blades 374
Defogging 213, 230
Windshield washer fluid 500
Messages in display 430
Mixing ratio 500
Refilling 332
Wiping 59
Windshield washer system 500Windshield wipers 58
Cleaning 374
Replacing wiper blade 450
Winter driving
Block heater* (Canada only) 365
Snow chains 365
Tires 364
Winter driving instructions 316
Winter tires 364
Wood trims, cleaning 377
