274 Controls in detailLoadingStorage box in cargo compartment (Canada only)
1Storage box
2Cargo compartment floor
3Rear seat backrest
4Locking hooks
Installing the storage box
Fold rear seat backrest3 forward
(page 266).
Insert storage box1 from behind into
cargo compartment with the opening
pointing in direction of travel.
Press locking hooks4 of storage
box1 into the space between the rear
seat backrest3 and the cargo com-
partment floor2.
Fold rear seat backrest3 to the rear
(page 267).
Loading the storage box
Fold rear seat backrest3 forward
(page 266).
Fill storage box1 with cargo through
the opening on the front side.
Fold rear seat backrest3 to the rear
(page 267).
Warning!
G
When you are using the storage box in the
cargo compartment, the backrests of the
seats in front of it must be completely en-
gaged to the rear, and the twin roller blind
must be installed.
Do not exceed the storage box’s maximum
load of 44 lb (20 kg), as it could otherwise
become detached during an accident or
sharp braking maneuvers, and could injure
you or other passengers.
When leaving the vehicle, always remove the
SmartKey or the SmartKey with
KEYLESS-GO* from the starter switch, take
it with you, and lock the vehicle. Do not
leave children unattended in the vehicle, or
with access to an unlocked vehicle. A child’s
unsupervised access to a vehicle could re-
sult in an accident and/or serious personal
injury.
i
The storage box1 is additionally held in
place from above by the twin roller blind.
i
The storage box1 in the cargo compart-
ment is covered by the rear bench seat and can
hold a maximum of 44 lb (20 kg) cargo.
