2007 MERCEDES-BENZ E320 BLUETEC language

151 Controls in detail
Control system
Control system
The control system is activated as soon as
the SmartKey in the starter switch is
turned to position1 or as soon as the
KEYLESS-GO start/stop button* is in
position1. The control system enables you
to:

call up information about your vehicle


change vehicle settings
For example, you can use the control sys-
tem to find out when your vehicle is next
due for service, to set the language for
messages in the instrument cluster dis-
play, and much more.
The control system relays information to
the multifunction display.
Multifunction display
1Outside temperature
2Trip odometer
3Automatic transmission program mode
4Main odometer
5Current gear selector lever position
Above illustration shows the standard
display.
For more information on menus displayed
in the multifunction display, see “Menus”
(page 154).
i
The displays for the audio systems (radio,
CD player) will appear in English, regardless of
the language selected.
Warning!
G
A driver’s attention to the road and traffic
conditions must always be his/her primary
focus when driving.
For your safety and the safety of others, se-
lecting features through the multifunction
steering wheel should only be done by the
driver when traffic and road conditions per-
mit it to be done safely.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 14 m) every second.

168 Controls in detailControl systemThe table below shows what settings can
be changed within the various menus. De-
tailed instructions on making individual
settings can be found on the following pag-
es.Instrument cluster
Time/Date
Lighting
Vehicle
Convenience
(page 169)
(page 171)
(page 173)
(page 176)
(page 178)
Selecting speedometer display
mode
Synchronizing the time
Setting daytime running
lamp mode (USA only)
Setting automatic
locking
Activate easy-en-
try/exit feature
Selecting language
Setting the time (hours)
Setting locator lighting
Audio search function
Setting parking posi-
tion for exterior rear
view mirror
1
1If equipped.Selecting display (speed dis-
play or outside temperature)
for status line
Setting the time (minutes)
Ambient lighting
Selecting display (speed dis-
play or outside temperature)
for basic display
Setting the date (month)
Setting headlamps de-
layed shut-off
Setting the date (day)
Setting interior lighting
delayed shut-off
Setting the date (year)

169 Controls in detail
Control system
Instrument cluster submenu
Access the
Instr. cluster
submenu via
the
Settings
menu. Use the
Instr. clus-
ter
submenu to change the instrument
cluster display settings. The following
functions are available:Selecting speedometer display mode

Move the selection marker with
buttonæ orç to the
Instr.
cluster
submenu.

Press buttonj ork repeatedly
until the message
Display unit
Speed-/odometer appears in the multi-
function display.
The selection marker is on the current
setting.

Press button æ or ç to set
speedometer unit to
km or
miles
.Selecting language

Move the selection marker with
buttonæ orç to the
Instr.
cluster
submenu.

Press buttonj ork repeatedly
until the message
Language
appears in
the multifunction display.
The selection marker is on the current
setting.

Press buttonæ orç to select
the language to be used for the multi-
function display messages.
Function
Page
Selecting speedometer display
mode
169
Selecting language
169
Selecting display (speed display
or outside temperature) for sta-
tus line display
170
Selecting display (speed display
or outside temperature) for basic
display
170


170 Controls in detailControl system
Available languages:

German


English


French


Italian


Spanish


Dutch


Danish


Swedish


Portuguese


Turkish


RussianSelecting display (speed display or out-
side temperature) for status line display

Move the selection marker with
buttonæ orç to the
Instr.
cluster
submenu.

Press buttonj ork repeatedly
until the message
Status line dis-
play
appears in the multifunction dis-
play.
The selection marker is on the current
setting.

Press buttonæ orç to select
the status line to
Speed
or
Outside
temp.
.Selecting display (speed display or out-
side temperature) for basic display

Move the selection marker with
buttonæ orç to the
Instr.
cluster
submenu.

Press buttonj ork repeatedly
until the message
Basic display
ap-
pears in the multifunction display.
The selection marker is on the current
setting.

Press buttonæ orç to select
the display permanently shown in the
multifunction display.
i
Russian is available for Canada vehicles
only.
i
You will see the status indicator when you
have called up a different display from the stan-
dard display.


510 IndexLamps, indicator and warning
ABS 27, 380
Battery (SmartKey) 113, 117
Brakes 383
CHECK ENGINE 384, 385
Coolant 386
Distance warning lamp* 255
Engine diagnostics 384, 385
Engine malfunction 27, 384, 385
ESP
®
27, 381, 382
Fog lamps 140
Front passenger front air bag off 29,
74, 81, 393, 394
Fuel reserve 27, 387
High beam headlamps 27
Instrument cluster 380, 381, 382,
383, 384, 385, 386, 387, 390, 391
Low beam headlamps 27
Seat belt telltale 27
Seat belts 388
Seat belts telltale 388
SRS 69
Turn signals 27
Language, Setting 169
LATCH-type child seat anchors see Chil-
dren in the vehicleLicense plate lamps 445
Messages in display 423
Replacing bulbs 449
Light alloy wheels, cleaning 375
Lighter see Cigarette lighter 288
Lighting
Daytime running lamp mode 139
Lighting, Exterior and interior 137
Limp-Home Mode 197
Loading 273
Loading see Vehicle loading
Locator lighting 174
Lock button
Door handle (KEYLESS-GO*) 65
Locking the vehicle 61
In an emergency 437
Loss of
Key, Mechanical 119
Key, SmartKey 119
Key, SmartKey with
KEYLESS-GO* 119
Loss of Service and Warranty Information
Booklet 475Low beam headlamps 56
Indicator lamp 27
Replacing bulbs 444
Switching on 56
Lubricants 491
Lumbar support 131
M
Maintenance 12
Calling up service indicator 368
Clearing service indicator
message 367
FSS (Canada vehicles) 366
Maintenance System (U.S.
vehicles) 366
Resetting service indicator 368
Service indicator 366
Service indicator message 366
Service term exceeded 367
Manual headlamp mode see Headlamps
Manual shift program E 63 AMG 194
Deactivating 196
Maximum load rating, Tires 360
Maximum loaded vehicle weight, Tire infla-
tion pressure 360
Maximum tire inflation pressure 361
Mechanical key 436

511 Index
Memory function see Seats
Menus see Control system menus
Minispare wheel see Spare wheel
Mirrors
Adjusting 47
Auto-dimming 198
Exterior rear view mirror 47
Exterior rear view mirror parking
positions 200
Interior rear view mirror 47
MON 322
Multicontour seat* 131
Multifunction display 151
Changing settings see Control system
menus and Control system sub-
menus
Selecting language 169
Multifunction display messages
ABS 398, 413
Batteries 412
Brake fluid 413
Brake pads 412
Check engine 384, 385
Coolant 414, 415, 416
Cruise control 399
Distronic* 399Door 430
Engine oil 418
ESP
®
398, 402, 413
Fog lamps 422, 423, 424, 425
Hood 430
Light sensor 424
Parking brake 413
Parking lamps 423
PRE-SAFE®
398, 407
Reserve fuel 419
SmartKey with KEYLESS-GO* 420,
421
SRS 429
Taillamps 425
Tele Aid 429
Telephone* 430
Tires 427
Trunk 430
Turn signals 426
Windshield washer fluid 430
Multifunction steering wheel 28, 152
Button operation 152N
NAV* menu 163
Navigation system
See separate COMAND operating
instructions 163
Net, parcel 284
Neutral gear position, Automatic
transmission 184, 186
Night security illumination 140
Normal occupant weight 361
Number, vehicle identification (VIN) 477
O
Occupant Classification System see OCS
Occupant distribution 361
Occupant safety 68
Air bags 70
Children and air bags 71
Children in the vehicle 88
Fastening the seat belt 49
Front passenger front air bag off indica-
tor lamp 79
Infant and child restraint systems 89
LATCH-type child seat anchors 94
OCS 75
Seat belts 49, 72