2007 MERCEDES-BENZ E320 BLUETEC garage door opener

ContentsPower windows .................................. 237
Opening and closing the windows 237
Synchronizing power windows ..... 239
Summer opening feature .............. 239
Convenience closing feature ........ 240
Power tilt/sliding sunroof .................. 242
Opening and closing the power
tilt/sliding sunroof ....................... 242
Synchronizing the power
tilt/sliding sunroof ....................... 244
Panorama roof with power
tilt/sliding panel* .............................. 245
Opening and closing the roller
sunblinds for the panorama roof
with power tilt/sliding panel ........ 245
Opening and closing the
panorama roof with power
tilt/sliding panel........................... 246
Synchronizing the panorama
roof with power tilt/sliding panel . 248
Driving systems ................................. 249
Cruise control............................... 249
Distronic*..................................... 252
Airmatic DC (Dual Control)
(only available on E 550,
E 550 4MATIC, E 63 AMG) ........... 265Parktronic system
(Parking assist)*........................... 269
Loading .............................................. 273
Roof rack*.................................... 273
Ski bag* (Canada only) ................ 274
Split rear bench seat* .................. 276
Expanding the cargo area*........... 279
Loading instructions..................... 279
Cargo tie-down rings* .................. 280
Retaining hooks ........................... 281
Useful features .................................. 282
Storage compartments ................ 282
Cup holders.................................. 284
Ashtrays ....................................... 287
Cigarette lighter ........................... 288
Power outlet................................. 289
Heated steering wheel
(Canada only) ............................... 289
Floormats ..................................... 290
Telephone* .................................. 291
Tele Aid ........................................ 294
Garage door opener ..................... 301
Operation......................................... 307
The first 1 000 miles (1 500 km) ........ 308
Driving instructions ........................... 309
Drive sensibly – save fuel............. 309
Drinking and driving ..................... 309
Pedals .......................................... 309
Power assistance ......................... 310
Brakes.......................................... 310
Driving off .................................... 312
Parking......................................... 313
Tires ............................................. 313
Hydroplaning................................ 314
Tire traction ................................. 314
Tire speed rating .......................... 315
Winter driving instructions ........... 316
Standing water............................. 317
Passenger compartment .............. 317
Driving abroad ............................. 317
Control and operation of radio
transmitter ................................... 318
Catalytic converter
(gasoline engine).......................... 318
Oxidation catalyst (diesel engine) 319
Emission control .......................... 319
Coolant temperature.................... 320

31 At a glance
Overhead control panel
Overhead control panel
Item
Page
1
Rear interior lighting on/off
145
2
Automatic interior lighting
145
3
Front interior lighting on/off
145
4
Right reading lamp on/off
145
5
Tilt/sliding sunroof or
tilt/sliding panel*
242,
245
6
Tele Aid (emergency call
system) button
294
7
Rear view mirror
198
Item
Page
8
Front reading lamps
145
9
Garage door opener
301
a
Hands-free microphone for
Tele Aid (emergency call
system), telephone*, and
Voice Control System*, see
separate operating instruc-
tions
294
181
b
Ambient lighting
175
c
Interior lighting
d
Left front reading lamp
on/off
145

301 Controls in detail
Useful features
Stolen Vehicle Recovery services
In the event your vehicle was stolen:
Report the incident to the police.
The police will issue a numbered inci-
dent report.

Pass this number on to the
Mercedes-Benz Response Center along
with your password issued to you when
you subscribed to the service.
The Response Center will then attempt
to covertly contact the vehicle’s Tele
Aid system. Once the vehicle is locat-
ed, the Response Center will contact
the local law enforcement and you. The
vehicle’s location will only be provided
to law enforcement.
Garage door opener
The integrated remote control is capable of
operating up to three separately controlled
devices. It provides a convenient way to re-
place up to three hand-held remote con-
trols used to operate devices such as
garage door openers, gate openers, or oth-
er devices compatible with HomeLink
® or
some other systems.
Before the integrated remote control can
be used, it must be programmed to the ga-
rage door opener, gate operator or other
device you wish to operate. See the follow-
ing instructions for programming informa-
tion.
Interior rear view mirror with integrated re-
mote control1Indicator lamp
2 3 4Signal transmitter button
Needed for programming (not part of vehi-
cle equipment):
5Hand-held remote control of ga-
rage door opener, gate operator
or other device
6Hand-held remote control but-
ton
i
When the anti-theft alarm stays on for more
than 30 seconds, a call is initiated automatically
to the Response Center. See anti-theft alarm
system (
page 106).

302 Controls in detailUseful features
Programming the integrated remote
control
Step 1:
Switch on the ignition (
page 37).Step 2:

If you have previously programmed a
signal transmitter button and wish to
retain its programming, proceed to
step 3.
If you are programming the integrated
remote control for the first time, press
and hold the two outer signal transmit-
ter buttons2 and4 and release
them only when the indicator lamp1
begins to flash after approximately
20 seconds (do not hold the button for
longer than 30 seconds). This proce-
dure erases any previous settings for
all three channels and initializes the
memory.
If you later wish to program a second
and/or third hand-held transmitter to
the remaining two signal transmitter
buttons, do not repeat this step and be-
gin directly with step 3.
Warning!
G
Before programming the integrated remote
control to a garage door opener or gate
operator, make sure people and objects are
out of the way of the device to prevent po-
tential harm or damage. When programming
a garage door opener, the door moves up or
down. When programming a gate operator,
the gate opens or closes.
Do not use the integrated remote control
with any garage door opener that lacks
safety stop and reverse features as required
by U.S. federal safety standards (this
includes any garage door opener model
manufactured before April 1, 1982).
A garage door that cannot detect an object
- signaling the door to stop and reverse -
does not meet current U.S. federal safety
standards.
When programming a garage door opener,
park vehicle outside the garage.
Do not run the engine while programming
the integrated remote control. Inhalation of
exhaust gas is hazardous to your health. All
exhaust gas contains carbon monoxide
(CO), and inhaling it can cause unconscious-
ness and possible death.

303 Controls in detail
Useful features
Step 3:
Hold the end of hand-held remote
control5 of the device you wish to
train approximately 2 to 5 in
(5 to 12 cm) away from the signal
transmitter button (2, 3 or4) to be
programmed, while keeping the indica-
tor lamp1 in view.
Step 4:

Using both hands, simultaneously
press hand-held remote control
button6 and the desired signal trans-
mitter button (2, 3 or4). Do not
release the buttons until step 5 is com-
pleted.
Indicator lamp1 will flash, first slowly
and then rapidly.Step 5:

After indicator lamp1 changes from a
slow to a rapidly flashing light, release
the hand-held remote control button
and the signal transmitter button.
Step 6:

Press and hold the just-trained signal
transmitter button (2, 3 or4) and
observe the indicator lamp1.
If indicator lamp1 stays on
constantly, programming is complete
and your device should activate when
the respective signal transmitter
button (2, 3 or4) is pressed and re-
leased.
Step 7:

To program the remaining two signal
transmitter buttons, repeat the steps
above starting with step 3.Rolling code programming
To train a garage door opener (or other
rolling code devices) with the rolling code
feature, follow these instructions after
completing the “Programming” portion
(steps 1 through 6) of this text. (A second
person may make the following training
procedures quicker and easier.)
Step 8:

Locate “training” button on the garage
door opener motor head unit.
Exact location and color of the button
may vary by garage door opener brand.
Depending on manufacturer, the
“training” button may also be referred
to as “learn”or “smart” button. If there
is difficulty locating the transmitting
button, refer to the garage door opener
Operator’s Manual.
i
Indicator lamp1 flashes immediately the
first time the signal transmitter button is pro-
grammed. If this button has already been pro-
grammed, the indicator lamp will only start
flashing after 20 seconds.
i
If indicator lamp1 flashes rapidly for about
2 seconds and then turns to a constant light,
continue with programming steps 8 through 12
as your garage door opener may be equipped
with the “rolling code” feature.


304 Controls in detailUseful featuresStep 9:
Press the “training” button on the ga-
rage door opener motor head unit.
The “training light” is activated.
You have 30 seconds to initiate the follow-
ing two steps.
Step 10:

Return to the vehicle and firmly press,
hold for 2 seconds and release the pro-
grammed signal transmitter button
(2, 3 or4).
Step 11:

Press, hold for 2 seconds and release
same signal transmitter button a sec-
ond time to complete the training pro-
cess.Step 12:

Confirm the garage door operation by
pressing the programmed signal trans-
mitter button (2, 3 or4).
Step 13:

To program the remaining two signal
transmitter buttons, repeat the steps
above starting with step 3.
Gate operator/Canadian programming
Canadian radio-frequency laws require
transmitter signals to “time-out” (or quit)
after several seconds of transmission
which may not be long enough for the
integrated signal transmitter to pick up the
signal during programming. Similar to this
Canadian law, some U.S. gate operators
are designed to “time-out” in the same
manner.
If you live in Canada or if you are having
difficulties programming a gate operator
(regardless of where you live) by using the
programming procedures, replace step 4
with the following:Step 4:

Press and hold the signal transmitter
button (2, 3 or4). Do not release
this button until it has been successful-
ly trained.

While still holding down the signal
transmitter button (2, 3 or4),
“cycle” your hand-held remote control
button6 as follows: Press and hold
button6 for 2 seconds, then release
it for 2 seconds, and again press and
hold it for 2 seconds. Repeat this se-
quence on the hand-held remote con-
trol until the frequency signal has been
learned. Upon successful training, indi-
cator lamp1 will flash slowly and then
rapidly after several seconds.

Proceed with programming step 5 and
step 6 to complete.
i
Some garage door openers (or other rolling
code equipped devices) may require you to
press, hold for 2 seconds and release the same
signal transmitter button a third time to com-
plete the training process.


306 Controls in detailUseful features

If another hand-held remote control is
available for the same device, try the
programming steps again using that
other hand-held remote control. Make
sure new batteries are in the hand-held
remote control before beginning the
procedure.


Straighten the antenna wire from the
garage door opener assembly. This
may help improve transmitting and/or
receiving signals.
i
Certain types of garage door openers are in-
compatible with the integrated remote control. If
you should experience further difficulties with
programming the integrated remote control,
contact an authorized Mercedes-Benz Center, or
call Mercedes-Benz Customer Assistance Cen-
ter (in the USA only) at 1-800-FOR-MERCedes, or
Customer Service (in Canada) at
1-800-387-0100.
i
USA only:
This device complies with Part 15 of the
FCC Rules. Operation is subject to the following
two conditions:
(1) This device may not cause harmful interfer-
ence, and
(2) this device must accept any interference re-
ceived, including interference that may
cause undesired operation.
Any unauthorized modification to this device
could void the user’s authority to operate the
equipment.
i
Canada only:
This device complies with RSS-210 of Industry
Canada. Operation is subject to the following
two conditions:
(1) This device may not cause interference, and
(2) this device must accept any interference re-
ceived, including interference that may
cause undesired operation of the device.
Any unauthorized modification to this device
could void the user’s authority to operate the
equipment.

507 Index
Front air bags 74
Front lamps see Headlamps
Front passenger front air bag
Messages in display 393
Front passenger front air bag off indicator
lamp 74, 79
Front seat head restraints see Head re-
straints
FSS (Canada vehicles) 366
Fuel 309, 322
Additives 497
Capacities, Fuel tank 494
Diesel fuel 322, 494
Filling the tank 321
Fuel filler flap and cap 321
Fuel reserve warning lamp 387
Premium unleaded gasoline 322
Requirements
Gasoline additives 497
Premium unleaded gasoline 496
Requirements, Octane rating 496
Technical data 491
Fuel consumption statistics
Since last reset 180
Since start 180Fuel filler flap 321
Locking/unlocking 321
Opening 322
Fuel reserve warning lamp 27
Fuel tank
Capacity 494
Filler flap 321
Fuel, Premium unleaded gasoline 322,
494, 496
Fuels, coolants, lubricants etc.
Capacities 491
Fuses 469
Aids for replacing fuses 469
Fuse box in passenger
compartment 470
Fuse box in trunk 470
Fuse chart 469
Fuse extractor 469
Replacing 469
Spare fuses 469
G
Garage door opener 31, 301
Gasoline see Fuel
GAWR 360Gear range
Automatic transmission 189
Limiting 189
Shifting into optimal 192, 194
Gear selector lever 52, 184
Cleaning 376
Gearshift pattern 184
Lock 52
Position 185, 186
Position indicator 52
Shifting procedure 185
Unlocking in an emergency 438
Gear selector lever one-touch gearshifting
Automatic transmission 191
Global locking/unlocking see SmartKey
Glove box 282
Good visibility 198
Gross Axle Weight Rating see GAWR
Gross Vehicle Weight Rating see GVWR
Gross Vehicle Weight see GVW
GVW 360
GVWR 360
H
Halogen headlamps see Headlamps
Hard plastic trim items, cleaning 376
Hazard warning flasher 144