2007 MERCEDES-BENZ E320 BLUETEC engine oil

[x] Cancel search: engine oil

Page 326 of 522

MERCEDES-BENZ E320 BLUETEC 2007 W211 Owners Manual 325 Operation
Engine compartment
Engine compartment
Hood
OpeningWarning!
G
Do not pull the release lever while the vehi-
cle is in motion. Otherwise the hood could 
be forced open by passing air flow

Page 328 of 522

MERCEDES-BENZ E320 BLUETEC 2007 W211 Owners Manual 327 Operation
Engine compartment

Pull handle2 to its stop out of radia-
tor grille.

Lift bottom of hood at edge of radiator 
grille.
The hood will be automatically held 
open at shoulder height by

Page 329 of 522

MERCEDES-BENZ E320 BLUETEC 2007 W211 Owners Manual 328 OperationEngine compartmentChecking engine oil level
When checking the oil level
the vehicle must be parked on level 
ground

with the engine at operating tempera-
ture, the vehicle must have be

Page 330 of 522

MERCEDES-BENZ E320 BLUETEC 2007 W211 Owners Manual 329 Operation
Engine compartment
Adding engine oil
E 350/E 550 (E 320 BLUETEC similar)
E63AMG
Unscrew filler cap1 from filler neck.

Add engine oil as required. Be careful 
not to overfill with oil.

Page 368 of 522

MERCEDES-BENZ E320 BLUETEC 2007 W211 Owners Manual 367 Operation
Maintenance
Clearing the maintenance service 
indicator message
The maintenance service indicator mes-
sage is automatically cleared
after approximately 10 seconds, when 
you switch on

Page 369 of 522

MERCEDES-BENZ E320 BLUETEC 2007 W211 Owners Manual 368 OperationMaintenanceCalling up the maintenance service indicator display
You can call up the maintenance service 
indicator display at any time to check 
when the next maintenance service is due.

Page 419 of 522

MERCEDES-BENZ E320 BLUETEC 2007 W211 Owners Manual 418 Practical hintsWhat to do if …When the message 
Check oil level at 
next refueling
 appears while the engine 
is running and at operating temperature, 
the engine oil level has dropped to approx

Page 456 of 522

MERCEDES-BENZ E320 BLUETEC 2007 W211 Owners Manual 455 Practical hints
Flat tire
Removing the wheel
1Alignment bolt
Unscrew upper-most wheel bolt and re-
move.

Replace this wheel bolt with alignment 
bolt1 supplied in the tool kit.

Remove the rem
Page:   < prev 1-8 9-16 17-24 25-32 next >