454 Technical dataFuels, coolants, lubricants etc.If the antifreeze mixture is effective to
-22°F (-30°C), the boiling point of the cool-
ant in the pressurized cooling system is
reached at approximately 266°F (130°C).
The coolant solution must be used year
round to provide the necessary corrosion
protection and increase boil-over protec-
tion. Refer to Maintenance Booklet for re-
placement interval.
Coolant system design and coolant used
determine the replacement interval. The
replacement interval published in the
Maintenance Booklet is only applicable if
MB 325.0 Anticorrosion/Antifreeze solu-
tion or other Mercedes-Benz approved
products of equal specification (see
Factory Approved Service Products pam-
phlet) are used to renew the coolant con-
centration or bring it back up to the proper
level.For information on other Mercedes-Benz
approved products of equal specification,
refer to the Factory Approved Service
Products pamphlet (USA only) or contact
an authorized Mercedes-Benz Center.
To provide important corrosion protection,
the solution must be at least 50% anticor-
rosion/antifreeze (equivalent to freeze
protection to approximately -35°F
[-30°C]). If you use a solution that is more
than 55% anticorrosion/antifreeze (freeze
protection to approximately -49°F
[-45°C]), the engine temperature will in-
crease due to the lower heat transfer capa-
bility of the solution. Therefore, do not use
more than this amount of anticorro-
sion/antifreeze.If the coolant level is low, water and
MB 325.0 Anticorrosion/Antifreeze
should be used to bring it up to the proper
level (have cooling system checked for
signs of leakage). Please make sure the
mixture is in accordance with label instruc-
tions.
The water in the cooling system must meet
minimum requirements, which are usually
satisfied by normal drinking water. If you
are not sure about the water quality, con-
sult an authorized Mercedes-Benz Center.
462 IndexEmergency Tensioning Device see ETD
Emergency, In case of
Batteries, Jump starting 423
First aid kit 391
Flat tire, changing 412
Fuses 428
Hazard warning flasher 134
Instrument cluster, indicator
lamps 342
Roadside Assistance 12
Towing the vehicle 342
Emission control 281
Information label 435
System warranties 10
Vacuum line routing diagram
label 435
Engine 437
Belt layout 436
Block heater* (Canada only) 328
Break-in recommendations 270
Cleaning 334
Compartment 286
Malfunction indicator lamp 345, 346,
373Maximum engine speed 437
Number 434, 435
Starting 51
Starting with KEYLESS-GO* 52
Tachometer 27
Technical data 437
Turning off with KEYLESS-GO* 61
Turning off with the SmartKey 61
Engine compartment
Hood 286
Engine coolant see Coolant 290
Engine oil 287, 449
Adding 289
Additives 451
Changing 451
Checking level 288
Consumption 287
Filler neck 289
Messages in display 377
Oil dipstick 288
Recommended engine oils and oil
filters 451ESP
®
94
Messages in display 358, 372
Warning lamp 343
ETD
Safety guidelines 68
Exterior lamp switch 128
Exterior rear view mirrors 47
Parking position 166, 187
Exterior view 22
F
Factory settings
Resetting 155
SmartKey with KEYLESS-GO* 108
Filler neck, Engine oil 289
First aid kit 391
Flat tire 412
Collapsible tire 415, 416
Jacking up the vehicle 414
Lowering the vehicle 418
Mounting the spare wheel 412, 415
Preparing the vehicle 412
Spare wheel 412
