Page 184 of 481

183 Controls in detail
Automatic transmission
If you have selected the AMG menu in the
control system and you are driving in the
manual program modeM, upshift
indicator2 in the multifunction display
advises you to upshift before the engine
reaches the overspeed range. Thus you
can drive at the maximum engine speed for
each gear without overrevving the engine.
1Gear indicator
2Upshift indicator
Shift to the next higher gear.
The fuel supply will otherwise be inter-
rupted to prevent the engine from over-
revving.Downshifting
Briefly press the gear selector lever to
the left in theD-direction.
or
Briefly pull left shift paddle1
(page 180).
The transmission shifts to the next
lower gear.Kickdown
Using the kickdown when driving in the
manual program modeM is not possible.
Deactivating manual shift program
Press the program mode selector
switch (
page 182) repeatedly
until
Cor
S appears in the multifunction
display.
or
Restart the engine.
The transmission will go to the
automatic program mode (C orS).
The manual program modeM is not
stored.
Warning!
G
On slippery road surfaces, never downshift
in order to obtain braking action. This could
result in drive wheel slip and reduced
vehicle control. Your vehicle’s ABS will not
prevent this type of loss of control.i
When you brake or stop, the transmission
shifts down to a gear from which you can easily
accelerate or take off.
Page 267 of 481

266 Controls in detailUseful featuresRolling code programming
To train a garage door opener (or other
rolling code devices) with the rolling code
feature, follow these instructions after
completing the “Programming” portion
(steps 1 through 6) of this text. (A second
person may make the following training
procedures quicker and easier.)
Step 8:
Locate “training” button on the garage
door opener motor head unit.
Exact location and color of the button
may vary by garage door opener brand.
Depending on manufacturer, the
“training” button may also be referred
to as “learn”or “smart” button. If there
is difficulty locating the transmitting
button, refer to the garage door opener
operator’s manual.
Step 9:
Press the “training” button on the ga-
rage door opener motor head unit.
The “training light” is activated.You have 30 seconds to initiate the follow-
ing two steps.
Step 10:
Return to the vehicle and firmly press,
hold for 2 seconds and release the pro-
grammed signal transmitter button
(2, 3 or4).
Step 11:
Press, hold for 2 seconds and release
same signal transmitter button a sec-
ond time to complete the training pro-
cess.
Step 12:
Confirm the garage door operation by
pressing the programmed signal trans-
mitter button (2, 3 or4).Step 13:
To program the remaining two signal
transmitter buttons, repeat the steps
above starting with step 3.
Gate operator/Canadian programming
Canadian radio-frequency laws require
transmitter signals to “time-out” (or quit)
after several seconds of transmission
which may not be long enough for the
integrated signal transmitter to pick up the
signal during programming. Similar to this
Canadian law, some U.S. gate operators
are designed to “time-out” in the same
manner.
If you live in Canada or if you are having
difficulties programming a gate operator
(regardless of where you live) by using the
programming procedures, replace step 4
with the following:
i
Some garage door openers (or other rolling
code equipped devices) may require you to
press, hold for 2 seconds and release the same
signal transmitter button a third time to com-
plete the training process.
Page 459 of 481

458 IndexAutomatic climate control (4-zone) 190
Air recirculation mode 200
Deactivating 195
Rear window defroster 189
Setting the temperature 197
Automatic headlamp mode 129
Automatic lighting control, Interior
lighting 135
Automatic locking when driving 165
Automatic shift program 177
Automatic transmission
Accelerator position 175
Automatic shift program 177
Emergency operation (limp-home
mode) 184
Gear ranges 176
Gear selector lever 171
Gear selector lever control one-touch
gearshifting 178
Gear selector lever positions 173
Gear shifting malfunctions 184
Kickdown 175
Kickdown, manual shift program
CLS 63 AMG 183Manual shift program
CLS 63 AMG 181
Program mode selector switch 177
Shifting procedure 172
Starting the engine 51
Steering wheel gearshift control
one-touch gearshifting* 179
Auxiliary bulbs 404
Messages in display 381
B
BabySmart
TM
Airbag deactivation system 76
Self-test 77
Backrest
Seat 42
Seat, multicontour* 122
Backup lamps see Reverse lamps
Bar 323
BAS 92
Batteries, SmartKey
Checking battery condition 110
Replacing 402
Batteries, SmartKey with KEYLESS-GO*
Checking battery condition 110
Replacing 402Batteries, vehicle 420
Charging 422
Disconnecting 421
Jump starting 423
Messages in display 370, 371
Reconnecting 422
Reinstalling 422
Removing 421
Bead 323
Beverage holder see Cup holders
Bi-Xenon headlamps see
Headlamps 128
Block heater* (Canada only) 328
Brake fluid
Checking 285
Brake lamps
Cleaning lenses 336
Replacing bulbs 406
Brake pads
Message in display 371
Brakes
High-performance brake system
(CLS 63 AMG only) 274
Warning lamp 344
Break-in period 270
Bulbs, replacing see Replacing bulbs
Page 465 of 481

464 IndexGear selector lever one-touch gearshifting
Automatic transmission 178
Global locking 104
Global locking/unlocking see Key, Smart-
Key or Key, SmartKey with KEY-
LESS-GO*
Glove box 244
Good visibility 185
Gross Axle Weight Rating see GAWR
Gross Vehicle Weight Rating see GVWR
Gross Vehicle Weight see GVW
GVW 323
GVWR 324
H
Halogen headlamps see Headlamps
Hands-free microphone 31
Hard plastic trim items, cleaning 339
Hazard warning flasher 134Head restraints 120
Active head restraints 83
Comfort head restraint*,
Adjusting 43
Folding back 121
Front seat, Adjusting 43
Front seat, Removing
Rear seat, Removing and
installing 120
Headlamp cleaning system* 185
Headlamp shut off delay see Delayed
shut-off, Exterior lamps 163
Headlamps
Automatic headlamp mode 129
Bi-Xenon headlamps, Active 128
Cleaning lenses 336
Cleaning system* 185
Halogen 405
High beam 55
High beam flasher 55
High beam see High beam headlamps
Low beam 55
Manual headlamp mode 129
Replacing bulbs 404
Switch 55Headliner and shelf below rear window,
cleaning 339
Heated seats* 123
Heated steering wheel (Canada
only) 252
Height adjustment
Head restraints 43
Seats 42
Steering wheel 44
Vehicle level control 232
High beam flasher 55, 132
High beam headlamps
Replacing bulbs 408
Switching on 55, 132
High mounted brake lamp 406
High-performance brake system
(CLS 63 AMG only) 274
Hood 286
Message in display 370
Horn 25
HVAC see Climate control system
Hydroplaning 276
Page 474 of 481

473 Index
Speedometer 27
Selecting display mode 157
SRS 64
Indicator lamp 27, 350
Messages in display 386
Standing lamps 128
Standing water, Driving through 279
Starter switch 38
Starter switch positions 38
Starting difficulties 52
Starting position 38
Starting the engine
SmartKey 51
SmartKey with KEYLESS-GO* 52
Steering wheel 28
Adjustment 44
Buttons 28
Cleaning 339
Steering wheel gearshift control one-touch
gearshifting*
Automatic transmission 179
Stolen Vehicle Recovery services 263Storage compartments 32, 244
Center armrest 244
Cup holder 247
Glove box 244
Parcel net in front passenger
footwell 246
Rear armrest 245
Rear center console 245
Ruffled storage bags 246
Under seat 245
Storing
Positions into memory (Memory
function*) 126
Tires 295
Submenus see Control system submenus
Substitute bulbs see Auxiliary bulbs
Sun visors 187
Sunroof see Power tilt/sliding sunroof
Sunshade*, rear window 188
Suspension tuning
For comfortable driving style 231
For sporty driving style 231
Symbols used in this operator’s
manual 15T
Tachometer 27, 139
Overspeed range 139
Tail lamps
Messages in display 384, 385
Replacing bulbs 409
Tar stains 333
Technical data
Air conditioning refrigerant 451
Brake fluid 451
Capacities fuels, lubricants etc. 449
Coolant 453
Dimensions 448
Electrical system 447
Engine 437
Engine oil additives 451
Engine oils 451
Fuel requirements 452
Gasoline additives 453
Premium unleaded gasoline 452
Rims and tires 438
Weights 448
Windshield washer and headlamp
cleaning system 450