2007 MERCEDES-BENZ CLS550 high beam

132 Controls in detailLightingCombination switchCombination switch1High beam
2High beam flasherHigh beam

Turn the exterior lamp switch to
positionB (
page 128).

Push the combination switch in direc-
tion of arrow1 to switch on the high
beam.
The high beam headlamp indicator
lampA in the instrument cluster
comes on (
page 26).

Pull the combination switch in direction
of arrow2 to its original position to
switch off the high beam.
The high beam headlamp indicator
lampA in the instrument cluster
goes out.
High beam flasher

Pull the combination switch briefly in
direction of arrow2.Corner-illuminating front fog lamps*
(CLS 550 with Bi-Xenon* headlamps
only)
The corner-illuminating front fog lamps im-
prove illumination of the area in the direc-
tion into which you are turning.
Corner-illuminating front fog lamps will op-
erate with the engine running and with

the exterior lamp switch in
positionB (
page 128)
or


the exterior lamp switch in
positionU (
page 128)
or


the daytime running lamp mode
activated (
page 130)
i
With the automatic headlamp mode activat-
ed: The corner-illuminating front fog lamps will
only come on in low ambient lighting conditions.

357 Practical hints
What to do if …
On the pages that follow, you will find a
compilation of the most important warning
and malfunction messages that may ap-
pear in the multifunction display.
For your convenience the messages are
divided into two sections:

Text messages (
page 358)


Symbol messages (
page 370)
Warning!
G
No messages will be displayed if either the
instrument cluster or the multifunction dis-
play is inoperative.
As a result, you will not be able to see infor-
mation about your driving conditions, such
as speed or outside temperature, warn-
ing/indicator lamps, malfunction/warning
messages or the failure of any systems.
Driving characteristics may be impaired.
If you must continue to drive, please do so
with added caution. Contact an authorized
Mercedes-Benz Center as soon as possible.
i
Switching on the ignition causes all
instrument cluster lamps (except high beam
headlamp indicator lamp and turn signal indica-
tor lamps unless activated) as well as the multi-
function display to come on. Make sure the
lamps and multifunction display are in working
order before starting your journey.

382 Practical hintsWhat to do if …Display symbol
Display messages
Possible cause/consequence
Possible solution
.
Front left
marker lamp
The front left side marker lamp is mal-
functioning.

Contact an authorized Mercedes-Benz
Center as soon as possible.
Front right
marker lamp
The front right side marker lamp is mal-
functioning.

Contact an authorized Mercedes-Benz
Center as soon as possible.
Front left park. lamp
Auxiliary bulb on
The left front parking lamp is malfunction-
ing. An auxiliary bulb is being used.
Halogen headlamp:
Replace the bulb as soon as possible
(page 404).
Bi-Xenon* headlamp:

Contact an authorized Mercedes-Benz
Center as soon as possible.
Front right park. lamp
Auxiliary bulb on
The right front parking lamp is malfunc-
tioning. An auxiliary bulb is being used.
Halogen headlamp:
Replace the bulb as soon as possible
(page 404).
Bi-Xenon* headlamp:

Contact an authorized Mercedes-Benz
Center as soon as possible.
High beam
left side
The left high beam lamp is malfunction-
ing.

Replace the bulb as soon as possible
(page 404).
High beam
right side
The right high beam lamp is malfunction-
ing.

Replace the bulb as soon as possible
(page 404).

405 Practical hints
Replacing bulbs
Front lamps
Lamp
Type
1
Additional turn signal
lamps
LED
2
Turn signal lamp
3457 AK
3
Halogen headlamps:
Low beam
Bi-Xenon* headlamps:
Low and high beam
1
1Vehicles with Bi-Xenon* headlamps: Low beam
and high beam use the same D2S-35W lamp. Do
not replace the Bi-Xenon bulbs yourself. Contact
your authorized Mercedes-Benz Center.
H7 (55 W)
D2S-35 W
4
Side marker lamp
W 5 W
Lamp
Type
5
Halogen headlamps:
High beam/high beam
flasher
Bi-Xenon* headlamps:
High beam flasher
H7 (55 W)
H7 (55 W)
Halogen headlamps:
Parking and standing
lamp
Bi-Xenon* headlamps:
Parking an standing
lamp
W 5 W
Blue Vision
LED
6
Front fog lamp
Corner-illuminating
front fog lamp*
H11 (55 W)
H11 (55 W)

407 Practical hints
Replacing bulbs
Have the LEDs and bulbs for the following
lamps replaced by an authorized
Mercedes-Benz Center:

Additional turn signals in the exterior
rear view mirrors


High mounted brake lamp


Bi-Xenon* lamps


Front fog lamps


Front side marker lamps


Parking and standing lamps (vehicles
with Bi-Xenon* headlamps only)


Rear lamps (except license plate
lamps)
Replacing bulbs for front lamps
1Housing cover for low beam halogen or
Bi-Xenon* headlamp
2Housing cover for high beam head-
lamp/high beam flasher bulb and for
parking and standing lamp bulb3Bulb socket for turn signal lamp bulb
4Bulb holder of high beam bulb
5Bulb socket for parking and standing
lamp bulb
6Bulb holder of low beam bulb
Before you start to replace a bulb for a
front lamp, do the following first:

Turn the exterior lamp switch to
positionM (
page 128).

Open the hood (
page 286) (except
for side marker lamps).
!
Do not replace the LEDs yourself. You could
otherwise damage the LEDs or parts of the vehi-
cle. Only have the LEDs replaced by an autho-
rized Mercedes-Benz Center.
Warning!
G
Do not remove the cover1 for the Bi-Xe-
non* headlamp. Because of high voltage in
Xenon* lamps, it is dangerous to replace the
bulb or repair the lamp and its components.
We recommend that you have such work
done by a qualified technician.

408 Practical hintsReplacing bulbsLow beam bulb (halogen headlamps
only)
Turn housing cover1 counterclock-
wise and remove it.

Turn bulb holder6 with the bulb coun-
terclockwise and remove it.

Pull the bulb at its socket out of bulb
holder6.

Insert the new bulb so that its socket
locates in the recess of bulb holder6
and is level to it.

Reinsert bulb holder6 with the bulb in
the lamp and turn clockwise.

Align housing cover1 and turn it
clockwise.High beam bulb/high beam flasher
bulb (halogen headlamps)/high beam
flasher bulb (Bi-Xenon* headlamps)

Turn housing cover2 counterclock-
wise and remove it.

Turn bulb holder4 with the bulb coun-
terclockwise and remove it.

Pull the bulb at its socket out of bulb
holder4.

Insert the new bulb so that its socket
locates in the recess of bulb holder4
and is level to it.

Reinsert bulb holder4 with the bulb in
the lamp and turn clockwise.

Align housing cover2 and turn it
clockwise.Front turn signal lamp bulb

Turn bulb socket3 with the bulb
counterclockwise and remove it.

Press gently onto the bulb and turn
counterclockwise out of bulb
socket3.

Press the new bulb gently into bulb
socket3 and turn clockwise until it
engages.

Place bulb socket3 back into the
lamp and turn it clockwise.

464 IndexGear selector lever one-touch gearshifting
Automatic transmission 178
Global locking 104
Global locking/unlocking see Key, Smart-
Key or Key, SmartKey with KEY-
LESS-GO*
Glove box 244
Good visibility 185
Gross Axle Weight Rating see GAWR
Gross Vehicle Weight Rating see GVWR
Gross Vehicle Weight see GVW
GVW 323
GVWR 324
H
Halogen headlamps see Headlamps
Hands-free microphone 31
Hard plastic trim items, cleaning 339
Hazard warning flasher 134Head restraints 120
Active head restraints 83
Comfort head restraint*,
Adjusting 43
Folding back 121
Front seat, Adjusting 43
Front seat, Removing
Rear seat, Removing and
installing 120
Headlamp cleaning system* 185
Headlamp shut off delay see Delayed
shut-off, Exterior lamps 163
Headlamps
Automatic headlamp mode 129
Bi-Xenon headlamps, Active 128
Cleaning lenses 336
Cleaning system* 185
Halogen 405
High beam 55
High beam flasher 55
High beam see High beam headlamps
Low beam 55
Manual headlamp mode 129
Replacing bulbs 404
Switch 55Headliner and shelf below rear window,
cleaning 339
Heated seats* 123
Heated steering wheel (Canada
only) 252
Height adjustment
Head restraints 43
Seats 42
Steering wheel 44
Vehicle level control 232
High beam flasher 55, 132
High beam headlamps
Replacing bulbs 408
Switching on 55, 132
High mounted brake lamp 406
High-performance brake system
(CLS 63 AMG only) 274
Hood 286
Message in display 370
Horn 25
HVAC see Climate control system
Hydroplaning 276

466 IndexKey, SmartKey with KEYLESS-GO*
Battery check lamp 105
Checking batteries 110
Factory setting 108
Global locking 108, 109
Global unlocking 108, 109
Locking/unlocking 105
Locking/unlocking, Selective
setting 109
Loss of 110
Messages in display 378, 379, 380,
383
Opening and closing the power
tilt/sliding sunroof 210
Opening and closing the
windows 210
Opening the trunk 112
Remote control 105
Replacing batteries 402
Restoring to factory setting 109
Selective setting 109
Starter switch positions 39
Starting the engine 52
Turning off engine 61
Turning off the engine 61KEYLESS-GO* see Key, SmartKey with
KEYLESS-GO*
Kickdown 175
Kilopascal 324
Knee bag 70
L
Labels
Certification 434
Emission control information 435
Vacuum line routing diagram 435
Lamp bulbs, exterior 404
Lamps, exterior
Front 405
Messages in display 380
Rear 406
Replacing bulbs 404
Switching on/off 128
Lamps, indicator and warning
ABS 27, 342
Air bag off 70
Battery (SmartKey) 104
Brakes 344
CHECK ENGINE 27, 345, 346
Coolant 347Distance warning lamp* 221, 227
Engine diagnostics 345, 346
Engine malfunction 27, 345, 346
ESP
®
27, 343
Fog lamps 131
Front passenger front air bag off 29,
76, 353, 354
Fuel reserve 27, 348
High beam headlamps 27
Instrument cluster 342
Seat belt telltale 27, 348, 349
SRS 65
Turn signals 27
Language, Setting 157
LATCH type child seat anchors 88
Layout of poly-V-belt drive 436
License plate lamps 406
Messages in display 383
Replacing bulbs 409
Light alloy wheels, cleaning 338
Lighter see Cigarette lighter