2007 MERCEDES-BENZ C350 warning

331 Practical hints
What to do if …
Lamp in center console
ProblemPossible cause/conse-
quenceSuggested solution
56The front passenger front air bag
off indicator lamp illuminates and
remains illuminated with the
weight of a typical adult or some-
one larger than a small individual
on the front passenger seat.The system is malfunctioning.Have the system checked as soon as possible
by an authorized Mercedes-Benz Center.
Also note any messages in the multifunction
display and follow corrective steps
(
page 333).
Warning!G
If the 56indicator lamp illuminates
and remains illuminated with the weight of a
typical adult or someone larger than a small
individual on the front passenger seat, do
not have any passenger use the front
passenger seat until the system has been
repaired.

332 Practical hints
What to do if …
ProblemPossible cause/conse-
quenceSuggested solution
56The front passenger front
air bag off indicator lamp
does not illuminate
and/or does not remain
illuminated with the
weight of a typical
12-month-old child in a
standard child restraint or
less on the front passen-
ger seat. The system is malfunctioning.Make sure there is nothing between seat cushion and
child seat and check installation of the child seat.
Make sure that no objects applying supplemental
weight onto the seat are present.
If the front passenger front air bag off indicator lamp
remains out, have the system checked as soon as pos-
sible by an authorized Mercedes-Benz Center. Do not
transport a child on the front passenger seat until the
system has been repaired.
Also note any messages in the multifunction display
and follow corrective steps (
page 337).
Warning!G
If the 56indicator lamp does not
illuminate or remains out with the weight of
a typical 12-month-old child in a standard
child restraint or less on the front passenger
seat, do not transport a child on the front
passenger seat until the system has been
repaired.

333 Practical hints
What to do if …
Vehicle status messages in the
multifunction display
Warning and malfunction messages
appear in the multifunction display located
in the instrument cluster.
Certain warning and malfunction messag-
es are accompanied by an audible signal.
Address these messages accordingly and
follow the additional instructions given in
this Operator’s Manual.
Selecting the vehicle status message
memory menu in the control system
(
page 130) displays both cleared and
uncleared messages.
High-priority messages appear in the
multifunction display in red color.Certain messages of high priority cannot
be cleared from the multifunction display
using the reset button (
page 118) or
buttonj, k, ÿ, orè on the
steering wheel.
Other messages of high priority and
messages of less immediate priority can
be cleared from the multifunction display
using the reset button (
page 118) or
buttonj, k, ÿ, orè on the
steering wheel. They are then stored in the
vehicle status message memory
(
page 130). Remember that clearing a
message will only make the message
disappear. Clearing a message will not
correct the condition that caused the
message to appear.
Warning!G
All categories of messages contain
important information which should be
taken note of and, where a malfunction is
indicated, addressed as soon as possible at
an authorized Mercedes-Benz Center.
Failure to repair condition noted may cause
damage not covered by the Mercedes-Benz
Limited Warranty, or result in property
damage or personal injury.

334 Practical hints
What to do if …
On the pages that follow, you will find a
compilation of the most important warning
and malfunction messages that may
appear in the multifunction display.
For your convenience the messages are
divided into two sections:

Text messages (page 335)

Symbol messages (page 343)
Warning!G
No messages will be displayed if either the
instrument cluster or the multifunction
display is inoperative.
As a result, you will not be able to see infor-
mation about your driving conditions, such
as speed or outside temperature,
warning/indicator lamps,
malfunction/warning messages or the
failure of any systems. Driving
characteristics may be impaired.
If you must continue to drive, please do so
with added caution. Visit an authorized
Mercedes-Benz Center as soon as possible.
iSwitching on the ignition causes all
instrument cluster lamps (except low beam
headlamp indicator lamp, high beam headlamp
indicator lamp, and turn signal indicator lamps
unless activated) as well as the multifunction dis-
play to come on. Make sure the lamps and multi-
function display are in working order before
starting your journey.

338 Practical hints
What to do if …
Display messagePossible cause/
consequencePossible solution
Monitor the 56indicator lamp on the center console (page 27) and the mul-
tifunction display in the instrument cluster (
page 24) for the following:
With the seat unoccupied and the ignition turned on,

the 56indicator lamp on the center console should illuminate and remain
illuminated, indicating that the OCS (
page 64) has deactivated the air bag.

the message Front-pass. airbag enabled See Operator’s Manual or the mes-
sage
Front-pass. airbag disabled See Operator’s Manual should not appear
in the multifunction display at any time the seat is unoccupied. Wait at last 60 sec-
onds for the system to complete the necessary check cycles and to make sure nei-
ther message appears in the multifunction display.
If above conditions are met, you can occupy the front passenger seat again. Depend-
ing on the front passenger classification sensed by the OCS (
page 64), the
56indicator lamp will remain illuminated or go out.
If above conditions are not met, the system is not working properly. Have the system
checked as soon as possible by an authorized Mercedes-Benz Center.
Warning!G
If the 56indicator lamp remains
out even after performing the above correc-
tive steps, do not have any children 12 years
old and under and other small individuals use the front passenger seat until the sys-
tem has been repaired.

340 Practical hints
What to do if …
Display messagePossible cause/
consequencePossible solution
Monitor the 56indicator lamp on the center console (page 27) and the mul-
tifunction display in the instrument cluster (
page 24) for the following:
With the seat unoccupied and the ignition turned on,

the 56indicator lamp on the center console should illuminate and remain
illuminated, indicating that the OCS (
page 64) has deactivated the air bag.

the message Front-pass. airbag enabled See Operator’s Manual or the mes-
sage
Front-pass. airbag disabled See Operator’s Manual should not appear
in the multifunction display at any time the seat is unoccupied. Wait at last 60 sec-
onds for the system to complete the necessary check cycles and to make sure
neither message appears in the multifunction display.
If above conditions are met, you can occupy the front passenger seat again. Depend-
ing on the front passenger classification sensed by the OCS (
page 64), the
56indicator lamp will remain illuminated or go out.
If above conditions are not met, the system is not working properly. Have the system
checked as soon as possible by an authorized Mercedes-Benz Center.
Warning!G
If the 56indicator lamp remains
illuminated with an adult occupant on the
front passenger seat even after performing
the above corrective steps, do not have anypassenger use the front passenger seat until
the system has been repaired.

341 Practical hints
What to do if …
Display messagePossible cause/consequencePossible solution
Run Flat Indicator
inoperative

The Run Flat Indicator* is malfunc-
tioning or has been switched off due
to an error.Have the Run Flat Indicator* checked by an
authorized Mercedes-Benz Center.
Check tires
Then restart
Run Flat Indicator

There was a warning message about
a loss in tire inflation pressure and
the Run Flat Indicator* has not been
reactivated yet.Make sure that the correct tire inflation pressure
is set for each tire.
Then reactivate the Run Flat Indicator*.
Tire pressure
Check tires

The Run Flat Indicator* indicates
that the pressure is too low in one or
more tires.Carefully bring the vehicle to a halt, avoiding
abrupt steering and braking maneuvers. Observe
the traffic situation around you.
Check and adjust the tire inflation pressure as
required (
page 290).
If necessary, change the wheel (page 377).
Reactivate the Run Flat Indicator* after adjusting
the tire inflation pressure values (
page 293).
Warning!G
Do not drive with a flat tire. A flat tire affects
the ability to steer or brake the vehicle.
You may lose control of the vehicle. Contin-
ued driving with a flat tire will cause exces-
sive heat build-up and possibly a fire.

342 Practical hints
What to do if …
Display messagePossible cause/consequencePossible solution
SRSRestraint
system
malfunction
Visit
workshopThe system is malfunctioning.Drive with added caution to the nearest
authorized Mercedes-Benz Center.
Warning!G
In the event a malfunction of the SRS is
indicated as outlined above, the SRS may
not be operational.
For your safety, we strongly recommend
that you visit an authorized Mercedes-Benz
Center immediately to have the system
checked; otherwise the SRS may not be
deployed when needed in an accident,
which could result in serious or fatal injury,
or it might deploy unexpectedly and
unnecessarily which could also result in
injury.