2007 MERCEDES-BENZ C230 Button

293 Operation
Tires and wheels
Reactivating the Run Flat Indicator*
The tire inflation pressure monitor must be
reactivated in the following situations:

If you have changed the tire inflation
pressure

If you have replaced the wheels or tires

If you have installed new wheels or
tires
Using the tire placard on the driver’s
door B-pillar or, if available, the inside
of the fuel filler flap, make sure the tire
inflation pressure of all four tires is cor-
rect.
Switch on the ignition (page 32).
The standard display menu appears in
the multifunction display (
page 126).
Press buttonk orj repeatedly
until the following message appears in
the multifunction display:
Press the reset button in the
instrument cluster (
page 311).
The following message will appear in
the multifunction display:
Restart
Run Flat
Indicator?
Yes
Chancel
If you wish to confirm activation:
Press buttonæ.
The following message will appear in
the multifunction display:
Run Flat
Indicator
restarted
After a certain “learning phase”, the Run
Flat Indicator checks the set pressure
values for all four tires.
If you wish to cancel activation:
Press buttonç.
or
Wait until the message
Restart
Run Flat
Indicator?
Yes
Chancel
disappears.
Warning!G
The Run Flat Indicator* can only warn you in
a reliable manner if you have set the correct
tire inflation pressures for each tire.
If an incorrect tire inflation pressure was
set, the system will monitor the pressure
according to the incorrect value.

311 Operation
Maintenance
Clearing the maintenance service
indicator message
The maintenance service indicator is
automatically cleared

after approximately 10 seconds when
you switch on the ignition or when
reaching the maintenance service
threshold while driving

after approximately 30 seconds, once
the suggested maintenance service
term has passed
You can also clear it yourself.1Reset button
Press reset button1 on the
instrument cluster.
The maintenance service indicator
message is cleared and the standard
display appears in the multifunction
display (
page 126).
iVehicles equipped with Maintenance
System (U.S. vehicles. Canada vehicles, depend-
ing on vehicle production date):
The Maintenance System in your vehicle tracks
distance driven and the time elapsed since your
last maintenance service and calculates other
maintenance service work required.
iVehicles equipped with FSS (Flexible Service
S
ystem) only (Canada vehicles, depending on ve-
hicle production date):

FSS evaluates engine temperature, oil level,
vehicle speed, engine speed, distance driven
and the time elapsed since your last service
and calculates other maintenance service
work required.

The interval between maintenance services
depends on your driving habits. A gentle
driving style, moderate engine speeds and
the avoidance of short-distance trips will
lengthen the interval between services.

312 Operation
Maintenance
Maintenance service term exceeded
If you have exceeded the suggested
maintenance service term, you will see the
following message in the multifunction
display:
Service A exceeded by XXXX miles(km)
Service A exceeded by XXX Days
In addition, a signal sounds when the
message appears.
Any authorized Mercedes-Benz Center will
reset the maintenance service indicator
following a completed maintenance
service.Calling up the maintenance service
indicator display
Switch on the ignition (page 32).
Press buttonè orÿ on the mul-
tifunction steering wheel repeatedly
until the standard display appears in
the multifunction display (
page 121).
Press buttonk orj until the
maintenance service indicator display
with the service symbol9 or½
and the service deadline appears in the
multifunction display.Resetting the maintenance service
indicator
In the event that the maintenance service
on your vehicle is not carried out by an
authorized Mercedes-Benz Center, you can
have the maintenance service indicator
reset. The automotive maintenance facility
carrying out the maintenance service will
find the information for resetting the
maintenance service indicator in the
maintenance-relevant information for your
vehicle. Such information is available from
either your authorized Mercedes-Benz
Center or directly from Mercedes-Benz.
iIf the battery is disconnected, the days of
disconnection will not be included in the count
shown by the maintenance service indicator. To
arrive at the true maintenance service deadline,
you will need to subtract these days from the
days shown in the maintenance service indicator
message or maintenance service indicator dis-
play.
Do not confuse the maintenance service indica-
tor with the engine oil level indicatorN.
iIf the maintenance service indicator was in-
advertently reset, have an authorized
Mercedes-Benz Center correct it.
Only reset if the proper maintenance service has
been performed. Resetting the system without
performing the proper service as called for by
the maintenance service indicator will result in
engine damage and/or other vehicle damage not
covered by the Mercedes-Benz Limited Warran-
ty.

333 Practical hints
What to do if …
Vehicle status messages in the
multifunction display
Warning and malfunction messages
appear in the multifunction display located
in the instrument cluster.
Certain warning and malfunction messag-
es are accompanied by an audible signal.
Address these messages accordingly and
follow the additional instructions given in
this Operator’s Manual.
Selecting the vehicle status message
memory menu in the control system
(
page 130) displays both cleared and
uncleared messages.
High-priority messages appear in the
multifunction display in red color.Certain messages of high priority cannot
be cleared from the multifunction display
using the reset button (
page 118) or
buttonj, k, ÿ, orè on the
steering wheel.
Other messages of high priority and
messages of less immediate priority can
be cleared from the multifunction display
using the reset button (
page 118) or
buttonj, k, ÿ, orè on the
steering wheel. They are then stored in the
vehicle status message memory
(
page 130). Remember that clearing a
message will only make the message
disappear. Clearing a message will not
correct the condition that caused the
message to appear.
Warning!G
All categories of messages contain
important information which should be
taken note of and, where a malfunction is
indicated, addressed as soon as possible at
an authorized Mercedes-Benz Center.
Failure to repair condition noted may cause
damage not covered by the Mercedes-Benz
Limited Warranty, or result in property
damage or personal injury.

355 Practical hints
What to do if …
Display symbolDisplay messagePossible cause/consequencePossible solution
LTele Aid malfunction.
Drive to workshopOne or more main functions of the Tele
Aid system* are malfunctioning.Have the Tele Aid system* checked by
an authorized Mercedes-Benz Center.
tFunction unavailableThis display appears if buttont
ors on the multifunction steering
wheel is pressed and the vehicle is not
equipped with a telephone*.
WTop up
washer fluidThe fluid level has dropped to
about1/3of total reservoir capacity.
Add washer fluid (page 280).

361 Practical hints
Unlocking/locking in an emergency
Unlocking/locking in an emergency
Unlocking the vehicle
If you are unable to unlock the vehicle with
the SmartKey, open the driver’s door and
the trunk using the mechanical key. Removing the mechanical key
1Mechanical key locking tab
2Mechanical key
Move locking tab1 in direction of
arrow.
Slide mechanical key2 out of the
housing.Unlocking the driver’s door
1Unlocking
Insert the mechanical key into the
driver’s door lock until it stops.
Turn the mechanical key counterclock-
wise to position1 until the locking
knob moves up.
The driver’s door is unlocked.
Pull the door handle to open the
driver’s door.
iUnlocking and opening the driver’s door
and/or the trunk with the mechanical key will
trigger the anti-theft alarm system*.
To cancel the alarm, do one of the following:

Press buttonŒ or‹ on the
SmartKey.

Insert the SmartKey in the starter switch.

420 Index
Audio system 187
Audio and telephone, operation 187
Button and soft key operation 190
CD changer* with MP3 202
CD operation 201
Operating and display elements 188
Operating audio system 190
Operating safety 187
Radio operation 194
Telephone* operation 208
Auto-dimming mirror* 161
Automatic central locking
Activating/deactivating
(Control system) 143
Automatic climate control* 174
Control panel 175
Defrosting, front 179
Rear window defroster 163
Automatic headlamp mode 110
Automatic locking when driving 99
Automatic shift program 157
Automatic time change (Standard time,
Daylight Saving time) 137Automatic transmission 151
Accelerator position 155
Automatic shift program 157
Emergency operation
(limp-home mode) 159
Gear ranges 156
Gear selector lever 151
Gear selector lever positions 153
Gear shifting malfunctions 159
Kickdown 155
One-touch gearshifting 158
Program mode selector switch 157
Shifting procedure 152
Automatic transmission*
Fluid level (ATF) 277
Starting engine 47B
Backrest
Driver’s multicontour seat*
(Canada only) 105
Rear seat, folding 234
Seat, manual 35
Seat, power* 37
Backup lamps
Messages in display 352
Replacing bulbs 368
Bar 304
BAS 84
Batteries, SmartKey
Changing 366
Checking battery condition 95
Battery, Vehicle 279, 383
Charging 385
Disconnecting and connecting 384
Jump starting 386
Removing and installing 384
Bead 304
Block heater (Canada only) 309
Bolts, Spare wheel 360

429 Index
MOE tires* see MOExtended system*
MOE* see MOExtended system*
MOExtended system* 382
MOExtended tires* 403
Multicontour seats* (Canada only) 105
Multifunction display 121
Changing settings see
Control system menus and
Control system submenus
Multifunction display messages
ABS 335
Brake fluid 344
Brake lamps 349
Brake pads 344
Coolant 345–347
Engine coolant 345–347
Engine oil 348
ESP
®335
Fog lamps 350, 352
Front passenger
front air bag 337, 340
Fuel cap 326, 349
Headlamps 350, 351
Key, SmartKey 349
Lamps, exterior 349–353
Parking brake 344Parking lamp 351
SRS 342
Steering gear oil 354
Tele Aid* 355
Telephone* 355
Turn signals 353
Windshield washer fluid 355
Multifunction steering wheel 26, 122
Button operation 122
N
Navigation system* 129
See separate COMAND*
operating instructions
Net, parcel 239
Neutral gear position,
Automatic transmission 151, 153
Neutral gear position,
Manual transmission 150
New vehicle break-in 260
Night security illumination 112
Setting 141
Normal occupant weight 305
Number, paintwork code 398
Number,
vehicle identification (VIN) 398, 399O
Occupant Classification System see OCS
Occupant distribution 305
Occupant safety 58
Air bags 59
Children and air bags 60
Children in the vehicle 74
Fastening the seat belt 43
Front passenger front
air bag off indicator lamp 68, 331
Infant and child restraint systems 74
LATCH-type child seat anchors 79
Seat belts 43, 62
OCS 64
Self-test 68
Odometer 121
Oil level see Engine oil level,
Checking oil level
Oil see Engine oil
One-touch gearshifting
Automatic transmission 158
Gear selector lever 158
Operating safety 187
Ornamental moldings, Cleaning 316
Outside temperature see Displays
Overhead control panel 29