2007 MERCEDES-BENZ C-CLASS SALOON automatic transmission

Instrument cluster (4-button multi-function steering wheel)
29Function Page
1 Reserve fuel warning lamp
28
5 2 Coolant warning lamp
28
1 3 Turn signal indicator lamp
104
4
ESP
®
warning lamp 27
9 5 ABS warning lamp
279
6 Engine diagnostic warning
lamp
282
7 Turn signal indicator lamp
104
8 Rev counter
12
4 9
Gearshift program display*
12
0 Function Pag
e a
Automatic transmission*
:
selector lever position dis-
play 118
Manual transmission: out-
side temperature
124
Manual transmission with
Speedtronic*: stored limit
speed
1 148
b Status indicator, right
c Diesel engine: preglow indi-
cator lamp
114
d SRS warning lamp
283
e Multi-function display
126
f Total distance recorder
g Trip meter
123
Outside temperature
1 h Speedometer Function Pag
e j Brake system warning lamp
280
k Seat belt warning lamp
283
l Coolant temperature gauge
12
3 m
Automatic transmission*
:
outside temperature 2 124
Vehicles with
Speedtronic*: stored limit
spee
d 148
n Status indicator, left
o Cloc
k 124
p Brightness control
123
q Fuel gaug
e r Main-beam indicator lamp
104
1
Only vehicles for the United Kingdom
2 Vehicles for the United Kingdom: the speed in km/h is always shown instead of the outside temperature. At a glance
* optional
204_AKB; 2; 3, en-GB
mkalafa,
2007-06-26T23:11:51+02:00 - Seite 29

Instrument cluster (4-button multi-function steering wheel)
31Function Page
1 Reserve fuel warning lamp
28
5 2 Coolant warning lamp
28
1 3 Turn signal indicator lamp
104
4
ESP
®
warning lamp 27
9 5 ABS warning lamp
279
6 Engine diagnostic warning
lamp
282
7 Turn signal indicator lamp
104
8 Rev counter
12
4 9
Gearshift program display*
12
0 Function Pag
e a
Automatic transmission*
:
selector lever position dis-
play 118
Manual transmission: out-
side temperature
124
Manual transmission with
Speedtronic*: stored limit
speed
3 148
b Status indicator, right
c Diesel engine: preglow indi-
cator lamp
114
d SRS warning lamp
283
e Multi-function display
126
f Total distance recorder
g Trip meter
123
Outside temperature
3 h Speedometer Function Pag
e j Brake system warning lamp
280
k Seat belt warning lamp
283
l Coolant temperature gauge
12
3 m
Automatic transmission*
:
outside temperature 4 124
Vehicles with
Speedtronic*: stored limit
spee
d 148
n Status indicator, left
o Cloc
k 124
p Brightness control
123
q Fuel gaug
e r Main-beam indicator lamp
104
3
Only vehicles for the United Kingdom.
4 Vehicles for the United Kingdom: the speed in km/h is always shown instead of the outside temperature. At a glance
* optional
204_AKB; 2; 3, en-GB
mkalafa,
2007-06-26T23:11:51+02:00 - Seite 31

Instrument cluster (12-button luxury multi-function steering wheel)
33Function Page
1 Turn signal indicator lamp
104
2
ESP
®
warning lamp 27
9 3 Speedometer
124
4 Segments
124
5 Multi-function display
131
6 Turn signal indicator lamp
104
7 Diesel engine: preglow indi-
cator lamp
114
8 Rev counter
12
4 9 SRS warning lamp
283
a ABS warning lamp
279
b Seat belt warning lamp
283 Function Pag
e c Outside temperature
124
Automatic transmission*:
additional speedometer
141
Vehicles for the United
Kingdom with automatic
transmission*: additional
speedometer 141
d
Automatic transmission*
:
outside temperature 141
e
Gearshift program display* 12
0 f Manual transmission: addi-
tional speedometer
141
Selector lever indicator* 118
g Cloc
k 124
h Total distance recorder
j Trip meter
123
k Main-beam indicator lamp
104
l Coolant temperature gauge
12
3 Function Pag
e m Coolant warning lamp
28
1 n Brake system warning lamp
280
o Engine diagnostic warning
lamp 282
p Brightness control
123
q Reserve fuel warning lamp
28
5 r Fuel gaug
e At a glance
* optional
204_AKB; 2; 3, en-G
B
mkalafa , 2007-06-26T23:11:51+02:00 - Seite 33

Instrument cluster (12-button luxury multi-function steering wheel)
35Function Page
1 Turn signal indicator lamp
104
2
ESP
®
warning lamp 27
9 3 Speedometer
124
4 Segments
124
5 Multi-function display
131
6 Turn signal indicator lamp
104
7 Diesel engine: preglow indi-
cator lamp
114
8 Rev counter
12
4 9 SRS warning lamp
283
a ABS warning lamp
279
b Seat belt warning lamp
283 Function Pag
e c Outside temperature
124
Automatic transmission*:
additional speedometer
141
Vehicles for the United
Kingdom with automatic
transmission*: additional
speedometer 141
d
Automatic transmission*
:
outside temperature 141
e
Gearshift program display* 12
0 f Manual transmission: addi-
tional speedometer
141
Selector lever indicator* 118
g Cloc
k 124
h Total distance recorder
j Trip meter
123
k Main-beam indicator lamp
104
l Coolant temperature gauge
12
3 Function Pag
e m Coolant warning lamp
28
1 n Brake system warning lamp
280
o Engine diagnostic warning
lamp 282
p Brightness control
123
q Reserve fuel warning lamp
28
5 r Fuel gaug
e At a glance
* optional
204_AKB; 2; 3, en-G
B
mkalafa , 2007-06-26T23:11:51+02:00 - Seite 35

Centre console
39Lower section
Function Page
1
Opens the ashtray* 197
Cigarette lighter* 197
Socket 198
2 Manual transmission: gear
lever
117
Automatic transmission*:
selector lever
118
3 Opens the stowage com-
partment 194
Opens the cup holder 179
4 Opens the stowage com-
partment 195
5 COMAND/Audio control
-
ler*: see the operating
instructions for the Head
Unit 6
Automatic transmission*
:
selects the gearshift pro-
gram 120 i
The layout of the buttons may differ
depending on the equipment in the vehicle. At a glance
* optional
204_AKB; 2; 3, en-GB
mkalafa,
2007-06-26T23:11:51+02:00 - Seite 39

Driving safety sys
tems68 G
Risk of accident
If ABS is faulty, the wheels could lock when
braking. This limits the steerability of the
vehicle when braking and the braking dis-
tance may increase.
If ABS is deactivated due to a malfunction,
then BAS and ESP are also deactivated. BAS (Brake Assist)
BAS operates in emergency braking situa-
tions. If you depress the brake pedal quickly,
BAS automatically boosts the braking force ,
thus shortening the stopping distance.
X Keep the brake pedal firmly depressed until
the emergency braking situation is over.
ABS prevents the wheels from locking.
The brakes will function as usual once you
release the brake pedal. BAS is deactivated. G
Risk of accident
If BAS has malfunctioned, the braking sys-
tem remains available with full brake boost-
ing effect. However, braking force is not
automatically increased in emergency
braking situations and the stopping dis-
tance may increase. Adaptive brake lamps
i Adaptive brake lamps are only available in
certain countries.
If you brake sharply from a speed of mor e
than 50 km/h or if braking is assisted by BAS,
the brake lamps flash rapidly. In this way,
traffic travelling behind you is warned in an
even more noticeable manner .
If you brake from a speed of more than
70 km/h and bring the vehicle to a halt, the
hazard warning lamps switch on automati-
cally once the vehicle is stationary and the
brake lamps light up constantly if you depres s
the brake pedal again. The hazard warning
lamps switch off automatically if you travel
faster than 10 km/h again. ES
P®
(Electronic Stability Program)
ES P®
monitors driving stability and traction,
i.e. power transmission between the tyres
and the road surface.
If ESP ®
detects that the vehicle is deviatin g
from the direction desired by the driver, one
or more wheels are braked to stabilise the
vehicle. The engine output is also modified, if
necessary, to keep the vehicle on the desired
course within the laws of physics. ESP assists
the driver when pulling away on wet or slip-
pery roads. ESP ®
can also stabilise the vehi-
cle during braking.
When ESP ®
intervenes, the vwarning
lamp flashes in the instrument cluster. G
Risk of accident
If the v warning lamp in the instrumen t
cluster flashes, proceed as follows:
R Do not deactivate ESP ®
under any cir -
cumstances .
R Only depress the accelerator pedal as far
as necessary when pulling away.
R Adapt your driving style to suit the pre -
vailing road and weather conditions.
The vehicle could otherwise go into a skid. Safety
204_AKB; 2; 3, en-GB
mkalafa,
2007-06-26T23:11:51+02:00 - Seite 68

Driving and pa
rking11
4
Manual transmission
X
Shift to neutral .
X Depress the parking brake (Y page 116).
Further information about the manual trans-
mission (Y page 117). Automatic transmission* P
Park position (selector lever lock)
R Reverse gear
N Neutral
D Drive positio n
X Before starting, make sure Pis selected.
i The engine can also be started when the
selector lever is in position N.
Further information about the automatic
transmission (Y page 118).
Starting the engine with the key i
Vehicles with automatic transmission*:
You can also use the "touch-start" function.
To do this, turn the key to position 3and release it immediately. The engine then
starts automatically.
X To start a petrol engine :turn the key to
position 3in the ignition lock and release it
as soon as the engine is running.
X To start a diesel engine :turn the key to
position 2in the ignition lock .
The q preglow indicator lamp in the
instrument cluster lights up.
X When the qpreglow indicator lamp
goes out, turn the key to position 3and
release it as soon as the engine is running.
i You can start the engine without preglow
if the engine is warm.
Starting the engine with KEYLESS GO* G
Risk of injury
Your vehicle can be started using a valid
KEYLESS GO key*. For this reason, childre n
should never be left unsupervised in the
vehicle. Always take the KEYLESS GO
key* with you when leaving the vehicle,
even if you are only leaving it for a short
time. Controls
* optional
204_AKB; 2; 3, en-GB
mkalafa,
2007-06-26T23:11:51+02:00 - Seite 114

Driving and pa
rking 11
5
The KEYLESS GO button can be used to start
the vehicle without inserting the key in the
ignition lock. 1
KEYLESS GO button
X Depress the brake pedal.
The selector lever lock is released.
X Petrol engine: press KEYLESS GO button
1 once.
The engine starts automatically.
X Diesel engine: press KEYLESS GO butto n
1 once.
Preglow is activated and the engine starts
automatically.
i You can start the engine without preglow
if the engine is warm: X
Press and hold KEYLESS GO button
1 until the engine is running. Pulling awa
y
! Warm up the engine quickly. Do not use
the engine's full performance until it has
reached operating temperature.
Only change into reverse gear when the
vehicle is stationary.
Where possible, avoid spinning the drive
wheels when pulling away on slippery
roads. You could otherwise damage the
drive train.
i The vehicle will lock itself centrally once
you have pulled away. The locking knobs in
the doors drop down.
You can open the doors from the inside at
any time.
You can also deactivate the automatic lock-
ing feature (Y page 143).
Manual transmission X
Depress the clutch pedal.
X Shift to either first or reverse gear. X
Slowly release the clutch pedal and
depress the accelerator pedal.
! Change gear in good time and avoid spin-
ning the wheels. You could otherwise dam-
age the vehicle.
Automatic transmission * i
It is only possible to move the selector
lever to the desired position if you depres s
the brake pedal. Only then is the selector
lever lock released.
X Depress the brake pedal and hold it down.
X Pull the parking brake release handle to
release the parking brake.
X Move the selector lever to position Dor R.
i Wait for the shift process to complet e
before pulling away.
X Release the brake pedal .
X Carefully depress the accelerator pedal.
i Upshifts take place at higher engine
speeds after a cold start. This helps the
catalytic converter to reach its operating
temperature more quickly. Controls
* optional
204_AKB; 2; 3, en-GB
mkalafa,
2007-06-26T23:11:51+02:00 - Seite 115