2007 MERCEDES-BENZ C-Class Radio settings

Contents
Satellite radio*. . . . . . . . . . . . . . . . . . 79
Important notes . . . . . . . . . . . . . . . . . . 80
Subscribing. . . . . . . . . . . . . . . . . . . . . . 81
Subscribing to satellite radio . . . . . 81
Satellite radio operation . . . . . . . . . . . . 82
Switching on . . . . . . . . . . . . . . . . . . 82
Changing the program category . . . 83
Selecting a station . . . . . . . . . . . . . 83
Memory functions . . . . . . . . . . . . . . 85
Displaying information . . . . . . . . . . 86
Displaying service information . . . . 87
Station list updates . . . . . . . . . . . . . 87
Sound settings . . . . . . . . . . . . . . . . 87
Telephone*. . . . . . . . . . . . . . . . . . . . . 89
Important notes . . . . . . . . . . . . . . . . . . 90
Telephone operation. . . . . . . . . . . . . . . 94
Switching telephone operation on . 94
Switching telephone operation off . 94
Emergency call “911” . . . . . . . . . . . 95
Entering codes . . . . . . . . . . . . . . . . 97
Switching to telephone operation . 98
Incoming call. . . . . . . . . . . . . . . . . 100Outgoing calls . . . . . . . . . . . . . . . . 101
Active call . . . . . . . . . . . . . . . . . . . 105
Phone book . . . . . . . . . . . . . . . . . . 108
Navigation*. . . . . . . . . . . . . . . . . . . . 111
Important notes . . . . . . . . . . . . . . . . . 112
Navigation DVD. . . . . . . . . . . . . . . 113
Route guidance after the vehicle
has been transported . . . . . . . . . . 114
Trip interruption during route
guidance . . . . . . . . . . . . . . . . . . . . 115
Navigation main menu . . . . . . . . . . . . 116
Activating the Navigation
main menu . . . . . . . . . . . . . . . . . . 116
Setting the routing mode . . . . . . . 118
Saving current location . . . . . . . . . 119
Destination input . . . . . . . . . . . . . . . . 120
Activating the Enter street menu . 120
Selecting the state/province . . . . 121
Entering destination address . . . . 122
Selecting home address . . . . . . . . 133
Route guidance. . . . . . . . . . . . . . . . . . 135
Starting route guidance . . . . . . . . 135
Route calculation . . . . . . . . . . . . . 135Recalculating an existing route . . . 135
Voice instructions . . . . . . . . . . . . . 136
Navigation displays . . . . . . . . . . . . 137
Partially digitized areas/unverified
roads . . . . . . . . . . . . . . . . . . . . . . . 140
Arriving at destination . . . . . . . . . . 145
Cancelling route guidance . . . . . . 145
During route guidance . . . . . . . . . . . . 146
Displaying the soft keys . . . . . . . . 146
Info menu . . . . . . . . . . . . . . . . . . . 147
Selecting a detour . . . . . . . . . . . . . 148
Stopover function . . . . . . . . . . . . . 150
Saving the current location . . . . . . 153
Defining route guidance displays . 153
Last destinations and destination
memory . . . . . . . . . . . . . . . . . . . . . . . 159
Last destinations memory. . . . . . . 159
Destination memory . . . . . . . . . . . 160
POIs (Points of Interest) . . . . . . . . . . . 163
Entering POIs . . . . . . . . . . . . . . . . 163
Selecting a POI on the map. . . . . . 166
Entering a POI by phone number . 167
Today’s plan . . . . . . . . . . . . . . . . . . . . 169
Adding a destination
to today’s plan . . . . . . . . . . . . . . . 169
Software Updates . . . . . . . . . . . . . . . . 172

7
Where to find it
Introduction

Where to find it
This Operator’s Manual is designed to pro-
vide support information for you, the
COMAND operator. Each chapter has its
own guide color to provide fast access to
information.
At a glance
Here you will find an overview of
all COMAND control elements and system
components. If you are operating
COMAND for the first time or if you have
rented or borrowed the vehicle, this is the
chapter you should read first.
Audio
Here you will find all the information on
how to use the radio, CD player (CD, MP3
CD), CD changer* (CD, MP3 CD) and AUX
operation.
Satellite radio*
This chapter provides information on how
to select a station and a program category.
Telephone*
Here you can learn in detail about the
many functions of the telephone, how to
initiate an emergency call and use the pho-
ne book.
Navigation
This chapter provides detailed information
on the following topics:
Destination input
Route guidance including detour
Last destinations and destination
memory
POIs
Today’s plan
Service
Here you will find all the information about:
SMS*
Tele Aid*
System settings
This chapter provides information on how
to adjust COMAND system settings.
Directories
The glossary explains the most important
technical terms.
The table of contents and index directory
will help you quickly locate the information
you need.

9 Introduction
Operating safety

Operating safety
WarningG
Any alterations made to electronic compo-
nents and the software can cause malfunc-
tions.
The radio, amplifier, CD changer*, satellite
radio*, telephone* and navigation module
are interconnected. When one of the com-
ponents is not operational or has not been
removed/replaced properly, the function of
other components may be impaired.
This condition might seriously impair the
operating safety of your vehicle.
We recommend that you have any service
work on electronic components carried out
only by qualified personnel.
WarningG
In order to avoid distraction which could
lead to an accident, the driver should enter
system settings with the vehicle at a stand-
still and operate the system only when road,
weather and traffic conditions permit.
Bear in mind that at a speed of just
30 mp/h (approximately 50 km/h), your car
is covering a distance of 44 feet (approxima-
tely 14 m) every second.
COMAND supplies you with information to
help you select your route more easily and
guide you conveniently and safely to your
destination. For safety reasons, we encoura-
ge the driver to stop the vehicle in a safe
place before answering or placing a call, or
consulting the COMAND screen to read na-
vigational maps, instructions, or downloa-
ded information.
While the navigation system provides direc-
tional assistance, the driver must remain fo-
cused on safe driving behavior, including
attention to traffic and street signs, and
should utilize the system’s audio cues while
driving.
The navigation system does not supply any
information on stop signs, yield signs, traffic
regulations or traffic safety rules. This al-
ways remains your personal responsibility
when you drive. DVD maps do not cover all
areas nor all routes within an area.

32 At a glance
Menu system
The main area 2 shows messages and
settings.
You can change the settings by operating
the system.
The status bar 3 is divided into three
areas.
Left side:
The current operating mode is indicated. In
this example: RadioCenter:
The status of the current operating mode
or other selectable functions are indicated.
In this example:FM = current waveband
1 = memory location of station,
e.g. “1”
Right side:
General status information is indicated
independent of the operating mode.
In this example:
Ready = Telephone* is ready for
operation
 = Reception strength of the
mobile phone*Menu functions and submenus
Using the soft keys, functions can be
switched ON or OFF, or submenus can be
called up.
E.g. the radio menu:The FM/AM soft key switches between
FM and AM band.
The Scan soft key starts/stops the
channel scan.
i
A maximum of five soft keys may be
displayed on each side of the main area
2.

36 At a glance
Quick reference COMAND
Common balance and fader settings apply
to the following systems:
Radio operation
CD operation (CD)
CD changer* operation (CD)
MP3 CD operation (MP3)
AUX operation
Satellite radio*
When you make balance or fader settings,
the system will automatically save the
settings for the current operating mode
and others.Setting balance and fader
In any audio source operation:
Press the Bal/Fad soft key.
Cross-hairs are displayed. The
horizontal hair line indicates the
balance setting. The vertical hair line
indicates the fader setting. You can
now make balance and fader settings.
Push the joystick to H or h.
Move the cross-hairs horizontally and
adjust the balance.
or
Push the joystick to g or G.
Move the cross-hairs vertically and
adjust the fader.
Press E or the Back soft key.
or
Wait until the display changes.
The new setting is saved.
Balance and fader
i
Push the joystick to F and f to
move the cross-hairs simultaneously in
vertical and horizontal direction.

37 At a glance
Quick reference COMAND
Different bass and treble settings are
possible for the following operating modes:
Radio: FM-, AM- and
Weather (WB) bands
Single CD (CD) and CD changer*
(
CD)
MP3 CD operation (MP3)
AUX operation
Satellite radio*
When you adjust bass or treble, the
settings apply to other sources within the
group, but not to the other modes. For
example, if you adjust the bass while
listening to FM, that same bass level
applies to AM and Weather band, but not
to satellite radio* or CD/MP3 CD.
Activating the Bass or Treble menu
In any audio source operation:
Press the Bass or Treble soft key.
The Bass or Treble menu will appear. Setting Bass and Treble
Push the joystick to H or h.
Bass or Treble is adjusted.
Press E or the Back soft key.
or
Wait until the display changes.
The new setting is saved.

If your vehicle is equipped with the
premium sound system*, the sound
functions* will be available for the
following operating modes:
Radio: FM-, AM- and
Weather (WB) bands
Single CD (CD) and CD changer*
(
CD)
MP3 CD operation (MP3)
AUX operation
Satellite radio*
The following sound functions* are
available:
Default Settings:
COMAND sets the default settings
(Bass, Treble, Bal/Fad) for the active
source mode.
Standard:
COMAND sets the sound linear for the
center of the vehicle.
Bass and Treble
i
Press the Bass or Treble soft key and
keep it depressed to move the cursor
continuously. Release the soft key to
set the current value.
Sound functions*

40 Audio
Audio operation

Audio operation
In chapter “Audio” you will find detailed
information regarding
radio operation
CD operation (CD drive, CD changer*)
MP3 CD operation
AUX operation
If you have not done so already, please fa-
miliarize yourself with these functions by
reading chapter “At a glance”.
Press A.
Audio menu
WarningG
In order to avoid distraction which could
lead to an accident, the driver should enter
system settings with the vehicle at a stand-
still and operate the audio system only if
permitted by road, weather and traffic con-
ditions.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is co-
vering a distance of 44 feet (approximately
14 m) every second.
Opening the Audio menu

47 Audio
Radio operation
Saving stations manually (FM, AM)
In the Radio main menu
Activate the desired wave band
(
page 42).
Press one of the number keys, e.g. 2,
longer than 2 seconds.
You will hear a verification beep if the
beep tones option was activated in the
system settings (
page 184).
The radio saves the current station at
the memory preset selected. The me-
mory preset selected will appear in the
status bar, e.g.
FM2.On the memory list
Activate the desired wave band
(
page 42).
Press the Presets soft key.
The memory Preset menu will appear.
Push the joystick to H, h or g,
G to highlight the desired memory
preset.
Press E longer than 2 seconds.
You will hear a verification beep if the
beep tones option was activated in the
system settings (
page 184).
The current station will be saved at the
memory preset selected.
i
There are 10 presets available (1 -
9, 0).
An existing entry is overwritten in the
memory list when a new input is given.