2007 MAZDA MODEL RX 8 lights

[x] Cancel search: lights

Page 202 of 443

MAZDA MODEL RX 8 2007  Owners Manual (in English) Black plate (201,1)
6Interior Comfort
Use of various features for drive comfort, including air-conditioning and audio
system.
Climate Control System ...................................................

Page 245 of 443

MAZDA MODEL RX 8 2007  Owners Manual (in English) Black plate (244,1)
Sunvisors
When you need a sunvisor, lower it for
use in front or swing it to the side.
Sunvisor
qVanity Mirrors
To use the vanity mirror, lower the
sunvisor.
The vanity mirror ligh

Page 246 of 443

MAZDA MODEL RX 8 2007  Owners Manual (in English) Black plate (245,1)
qOverhead Lights
Front
Switch
PositionFront Overhead Lights
Light off
lLight on when any door is open
lLight on or off when the
illuminated entry system is on
Rear
Switch
PositionR

Page 257 of 443

MAZDA MODEL RX 8 2007  Owners Manual (in English) Black plate (256,1)
Parking in an Emergency
The hazard warning lights should always
be used when you stop on or near a
roadway in an emergency.
The hazard warning lights warn other
drivers that your v

Page 289 of 443

MAZDA MODEL RX 8 2007  Owners Manual (in English) Black plate (288,1)
qSchedule 2
Maintenance IntervalNumber of months or kilometers (miles), whichever comes first
Months 4 8 12 16 20 24 28 32 36 40 44 48
×1000 km 8 16 24 32 40 48 56 64 72 80 88 96

Page 312 of 443

MAZDA MODEL RX 8 2007  Owners Manual (in English) Black plate (311,1)
Light Bulbs
Headlights (High-beam)Front side-marker lights
Front turn signal lights
Headlights (Low-beam)
Fog lights
Parking lights Overhead light/Map lights (Front)
Vanity mirror

Page 315 of 443

MAZDA MODEL RX 8 2007  Owners Manual (in English) Black plate (314,1)
NOTE
lIf the halogen bulb is accidentally
touched, it should be cleaned with
rubbing alcohol before being used.
lUse the protective cover and carton
of the replacement bulb to disp

Page 316 of 443

MAZDA MODEL RX 8 2007  Owners Manual (in English) Black plate (315,1)
qReplacing a Bulb (Interior)
Overhead light/Map lights (Front)
1. Remove the screws with a Phillips
screwdriver.
2. Wrap a flathead screwdriver with a soft
cloth to prevent damage