2007 MAZDA MODEL 5 remove seats

[x] Cancel search: remove seats

Page 13 of 409

MAZDA MODEL 5 2007  Owners Manual Black plate (14,1)
Front Seats
WARNING
Do not modify or replace the front
seats:Modifying or replacing the front seats
such as replacing the upholstery or
loosening any bolts is dangerous. The
front s

Page 15 of 409

MAZDA MODEL 5 2007  Owners Manual Black plate (16,1)
qHeight Adjustment (Drivers Seat)
By moving the seat lever up or down, the
seat bottom height can be adjusted.
DownUp
q
Lumbar Support Adjustment
(Drivers Seat)
To adjust the lumb

Page 17 of 409

MAZDA MODEL 5 2007  Owners Manual Black plate (18,1)
Second-Row Seats
WARNING
Do not stack cargo higher than the
seatback:Stacking luggage or other cargo
higher than the seatback is
dangerous. During a sudden stop or
collision, object

Page 19 of 409

MAZDA MODEL 5 2007  Owners Manual Black plate (20,1)
CAUTION
When returning a rear-reclined
seatback to its upright position,
make sure you hold onto the
seatback with your other hand while
operating the lever. If the seatback is
not

Page 22 of 409

MAZDA MODEL 5 2007  Owners Manual Black plate (23,1)
Third-Row Seat
WARNING
Do not stack cargo higher than the
seatbacks:Stacking luggage or other cargo
higher than the seatbacks is
dangerous. During a sudden stop or
collision, object

Page 42 of 409

MAZDA MODEL 5 2007  Owners Manual Black plate (43,1)
4. To get the retractor into the automaticlocking mode, pull the shoulder belt
portion of the seat belt until the entire
length of the belt is out of the retractor.
5. Push the chil

Page 47 of 409

MAZDA MODEL 5 2007  Owners Manual Black plate (48,1)
LATCH Child-Restraint Systems
Your Mazda is equipped with LATCH lower anchors for attachment of specially designed
LATCH child-restraint systems in the rear seats. Both anchors must

Page 66 of 409

MAZDA MODEL 5 2007  Owners Manual Black plate (67,1)
WARNING
Do not operate a vehicle with damaged
air bag/seat belt pretensioner system
components:Expended or damaged air bag/seat
belt pretensioner system components
must be replaced