2007 LINCOLN TOWN CAR reset

[x] Cancel search: reset

Page 27 of 328

LINCOLN TOWN CAR 2007  Owners Manual MENU until AUTOSET appears in the display. PressSEL-TEXT
to toggle ON/OFF. When the six strongest stations are filled, the station
stored in preset 1 will begin playing. If there are less than six str

Page 28 of 328

LINCOLN TOWN CAR 2007  Owners Manual 14.CD:Press to enter CD mode.
Press CD and a preset to select a
specific CD to play.
15.SAT:SAT is only available when equipped with Satellite radio. Your
vehicle may be equipped with Satellite ready

Page 40 of 328

LINCOLN TOWN CAR 2007  Owners Manual Volume/power control
Press knob to turn the audio system
on/off. Turn to raise or lower
volume. The levels will be displayed
on the screen.
To activate the navigation mode,
press MAP or DEST.
To adjus

Page 41 of 328

LINCOLN TOWN CAR 2007  Owners Manual 3. SCV is located in the middle of
the screen. Press to turn on.
4. Select setting 1 to 7 or turn off.
The recommended level for the speed compensated volume is from level
1 through level 3. When acti

Page 42 of 328

LINCOLN TOWN CAR 2007  Owners Manual Tune adjust
Press TUNE to manually move
down/up (
/) the frequency
band.
In CD mode, press TRACK to select
the previous/next (
/).
Autoset memory preset
Autoset allows you to set strong radio stations

Page 43 of 328

LINCOLN TOWN CAR 2007  Owners Manual Scan
Press SCAN for a brief sampling of
all listenable stations and CD tracks.
Press again to disable and remain on
the current selection.
Preset scan
Press PRESET SCAN to scan the
stations stored in

Page 44 of 328

LINCOLN TOWN CAR 2007  Owners Manual Traffic information not available in most U.S. markets.
Information feature
Press INFO to view the frequency,
call letters and PTY category of the
selected FM station.
Note:Not all stations support IN

Page 45 of 328

LINCOLN TOWN CAR 2007  Owners Manual Once PTY has been programmed, press SEEK (/) or SCAN to
initiate a search up or down the frequency.
Preset scan and Autoset also initiate PTY searches. The search will stop
when the desired program ty