2007 LINCOLN NAVIGATOR lock

[x] Cancel search: lock

Page 207 of 312

LINCOLN NAVIGATOR 2007  Owners Manual Driving with a 6–speed automatic transmission
This vehicle is equipped with an
Adaptive Transmission Shift
Strategy. The Adaptive Transmission
Shift Strategy offers the optimal
transmission operatio

Page 210 of 312

LINCOLN NAVIGATOR 2007  Owners Manual REVERSE SENSING SYSTEM
The reverse sensing system sounds a tone to warn the driver of obstacles
near the rear bumper when the R (Reverse) gear is selected.
To help avoid personal injury, please read a

Page 213 of 312

LINCOLN NAVIGATOR 2007  Owners Manual •4X4provides electronically locked four-wheel drive power to front and
rear wheels. The RTT location in the message center will display “4X4”
when this position is selected. This position is not

Page 215 of 312

LINCOLN NAVIGATOR 2007  Owners Manual If your vehicle gets stuck
If your vehicle gets stuck in mud or snow it may be rocked out by
shifting between forward and reverse gears, stopping between shifts, in a
steady pattern. Press lightly on

Page 219 of 312

LINCOLN NAVIGATOR 2007  Owners Manual Descend a hill in the same gear you
would use to climb up the hill to
avoid excessive brake application
and brake overheating. Do not
descend in neutral; instead,
disengage overdrive or manually
shift

Page 221 of 312

LINCOLN NAVIGATOR 2007  Owners Manual ROADSIDE ASSISTANCE
Getting roadside assistance
To fully assist you should you have a vehicle concern, Ford Motor Company
offers a complimentary roadside assistance program. This program is
separate f

Page 226 of 312

LINCOLN NAVIGATOR 2007  Owners Manual The fuses are coded as follows.
Fuse/Relay
LocationFuse Amp
RatingPassenger Compartment Fuse
Panel Description
1 30A Smart window #1
2 15A Driver side power seat memory
3 15A FES
4 30A Smart window #2

Page 235 of 312

LINCOLN NAVIGATOR 2007  Owners Manual Removing the jack and tools
1. Open the liftgate, then locate the
access panel on the floor behind the
3rd row seat. Unlatch and remove
the panel.
2. Remove the jack and tools
assembly tray from the
c