2007 LEXUS LX470 remove seats

16
1-3. Adjustable components
Hook the holding strap to the
assist grip and secure the seat by
pulling its free end.
When returning the second seats
to their original position, put the
holding strap into the pocket.
Remove the seat hook covers from
the back of the seat cushion, and
install them on the seat hooks.
When returning the second seats
to their original position, remove
the seat hook covers from the floor
and install them in the back of the
seat cushion.
■Returning second seats.
Reverse the steps above.
If you cannot raise the seatback
because of the locked seat belt,
release the lock.Push in the lower front edge of
the seatback cushion to slacken
the seat belt.
Let the seat belt retract a little.
STEP3
STEP4

18
1-3. Adjustable components
While turning the lever, lift and
slide the whole seat backward.
When returning the third seats to
their original position, slide them
forward to their locked position
while lifting down with the lever,
and then completely lift them
down.
Hook the holding strap to the
assist grip and secure the seat by
pulling its free end.
When returning the third seats to
their original position, put the hold-
ing strap into the pocket.
Remove the seat hook covers from
the back of the seat cushion, and
install them on the seat hooks.
When returning the third seats to
their original position, remove the
seat hook covers from the floor and
install them in the back of the seat
cushion.
■Returning third seats.
Reverse the steps above.
STEP2
STEP3
STEP4

19
1-3. Adjustable components
1
Before driving
Removing third seats■ Before removing third seats
Perform and in “Tumbling third seats”. ( P. 17)
■ Removing third seats
Remove the lever cover and pull
the lock release lever. Lift up the
rear side of the seat and pull the
whole seat backward.
When returning the third seats to
their original position, put the front
side of the seat, pull the lever and
then put the rear side.
Remove the seat hook covers from
the back of the seat cushion and
install them on the seat hooks.
When returning the third seats to
their original position, remove the
seat hook covers from the floor and
install them in the back of the seat
cushion.
■Returning third seats
Reverse the steps above.
STEP1STEP2
STEP1
STEP2

23
1
1-3. Adjustable components
Before driving
Head restraints
■Adjusting the height of the head restraints
■Head restraints of different seats
The head restraints are specially designed for the seats on which they are installed.
CAUTION
■Head restraint precautions
Observe the following precautions regarding the head restraints. Failure to do so
may result in death or serious injury.
●Adjust the head restraints to the correct position at all times.
●Do not drive with the head restraints removed.
Vertical adjustment
Push and hold the lock release
button when lowering the head
restraint.
Angle adjustment *
Removal
Pull the head restraint up while
pushing the lock release button.
*: Front seats only
Lock
release
button
Make sure that the head restraints are
adjusted so that the center of the head
restraint is closest to the top of your ears.

264
4-1. Maintenance and care
NOTICE
■Cleaning detergents
Do not use the following types of detergent, as they may discolor the vehicle inte-
rior or cause streaks or damage to painted surfaces.
●Non-seat portions: Organic substances su ch as benzene or gasoline, alkaline or
acidic solutions, dye, or bleach.
●Seats: Acidic solutions, such as thinner, benzene, or alcohol.
■Preventing damage to leather surfaces
Observe the following precautions to avoid damage to and deterioration of leather
surfaces.
●Remove any dust or dirt on leather surfaces immediately.
●Do not expose the vehicle to direct sunlight for extended pe riods of time. Park
the vehicle in the shade, especially during summer.
●Do not place items made of vinyl, plastic, or that contain wax on the upholstery, as
they may stick to the leather surface if the vehicle interior heats up significantly.
■Water on the floor
Do not wash the vehicle floor with water.
Vehicle systems such as the audio syst em may be damaged if water comes into
contact with electrical components under the floor of the vehicle, and may also
cause the body to rust.
■Cleaning the inside of the rear window
Be careful not to scratch or damage the heater wires or antenna.