2007 LEXUS LX470 lock

8
1-2. Opening, closing and locking the doors
When the setting or canceling operation is complete, all doors are locked
and then unlocked.
FunctionShift lever positionSwitch position
Shift position linked door locking
function
“P”Shift position linked door unlock-
ing function
Speed linked door locking function
“N”Driver's door linked door unlocking
function
■Customization
Settings (e.g. unlocking function using a key) can be changed. ( P. 3 8 9 )
CAUTION
■To prevent an accident
Observe the following precautions while driving the vehicle.
Failing to do so may result in a door open ing and an occupant falling out, resulting in
death or serious injury.
●Always use a seat belt.
●Always lock all doors.
●Ensure that all doors are properly closed.
●Do not pull the inside handle of the front door while driving.
●Set the rear door child protector locks when children are seated in the rear seat.

9
1
1-2. Opening, closing and locking the doors
Before driving
Back door
The back door can be locked/unlocked using a key, wireless remote con-
trol or door lock switch.
■Key
Unlocks the door
Locks the door
Open the door
■ Wireless remote control
 P. 3
■ Door lock switch
Locks the door
Unlocks the door

10
1-2. Opening, closing and locking the doors
Back door child-protector lockThe door cannot be opened from
inside the vehicle when the lock is
set.
This lock can be set to prevent chil-
dren from opening the back door.
Move the lever to the LOCK posi-
tion.
■ Inside lock button
Unlocks the door
Locks the door
Open the door

11
1-2. Opening, closing and locking the doors
1
Before driving
Rear step bumperThe rear step bumper is for rear
end protection and easier step-up
loading.
CAUTION
Observe the following precautions.
Falling to do so may result in death or serious injury.
■While driving
●Keep the back door closed.
This not only keeps personal belongings from being thrown out, but also prevents
exhaust gases from entering the vehicle.
●Do not get on the rear step bumper.
NOTICE
■To prevent damage to the back door components
●Do not apply any force, paint or let an y other foreign matter on the damper.
●Make sure there is nothing in the doorway before closing.
●Do not allow more than one person to get on the rear step bumper at a time.

15
1-3. Adjustable components
1
Before driving
Tumbling second seats and third seat entryFor easy access to the third seat, perform and in “Tum-
bling second seats”. ( P. 1 5 )
■ Before tumbling second seats
Stow the seat belt buckles and
lower the head restraints to the
lowest position.
■ Tumbling second seats
Pull the seatback angle levers and
fold the second seats down.
When returning the second seats
to their original position, lift them
up until they lock.
Pull the lever under the seat cush-
ion or pull the strap on the rear end
of the seat cushion and swing the
whole seat forward.
When returning the second seats
to their original position, lift them
down until they lock.
STEP1STEP2
STEP1
STEP2

16
1-3. Adjustable components
Hook the holding strap to the
assist grip and secure the seat by
pulling its free end.
When returning the second seats
to their original position, put the
holding strap into the pocket.
Remove the seat hook covers from
the back of the seat cushion, and
install them on the seat hooks.
When returning the second seats
to their original position, remove
the seat hook covers from the floor
and install them in the back of the
seat cushion.
■Returning second seats.
Reverse the steps above.
If you cannot raise the seatback
because of the locked seat belt,
release the lock.Push in the lower front edge of
the seatback cushion to slacken
the seat belt.
Let the seat belt retract a little.
STEP3
STEP4

17
1-3. Adjustable components
1
Before driving
Tumbling third seats■ Before tumbling third seats
Stow the seat belts and buckles,
and lower the head restraints to
the lowest position.
Use the seat belt hangers to pre-
vent the belts from being tangled.
■ Tumbling third seats
Pull the seatback angle levers and
fold the third seats.
When returning the third seats to
their original position, lift them up
until they lock.
STEP1

18
1-3. Adjustable components
While turning the lever, lift and
slide the whole seat backward.
When returning the third seats to
their original position, slide them
forward to their locked position
while lifting down with the lever,
and then completely lift them
down.
Hook the holding strap to the
assist grip and secure the seat by
pulling its free end.
When returning the third seats to
their original position, put the hold-
ing strap into the pocket.
Remove the seat hook covers from
the back of the seat cushion, and
install them on the seat hooks.
When returning the third seats to
their original position, remove the
seat hook covers from the floor and
install them in the back of the seat
cushion.
■Returning third seats.
Reverse the steps above.
STEP2
STEP3
STEP4