2007 LEXUS LX470 key

8
1-2. Opening, closing and locking the doors
When the setting or canceling operation is complete, all doors are locked
and then unlocked.
FunctionShift lever positionSwitch position
Shift position linked door locking
function
“P”Shift position linked door unlock-
ing function
Speed linked door locking function
“N”Driver's door linked door unlocking
function
■Customization
Settings (e.g. unlocking function using a key) can be changed. ( P. 3 8 9 )
CAUTION
■To prevent an accident
Observe the following precautions while driving the vehicle.
Failing to do so may result in a door open ing and an occupant falling out, resulting in
death or serious injury.
●Always use a seat belt.
●Always lock all doors.
●Ensure that all doors are properly closed.
●Do not pull the inside handle of the front door while driving.
●Set the rear door child protector locks when children are seated in the rear seat.

9
1
1-2. Opening, closing and locking the doors
Before driving
Back door
The back door can be locked/unlocked using a key, wireless remote con-
trol or door lock switch.
■Key
Unlocks the door
Locks the door
Open the door
■ Wireless remote control
 P. 3
■ Door lock switch
Locks the door
Unlocks the door

21
1
1-3. Adjustable components
Before driving
Driving position memory system
Your preferred driving position (the position of the driver's seat, steering
wheel and outside rear view mirrors) can be entered into the computer's
memory and recalled with the touch of a button.
Two different driving positions can be entered into memory.
■Entering a position to memory
Check that the shift lever is set in “P”.
Turn the ignition key to the “ON” position.
Adjust the driver’s seat, steeri ng wheel, and outside rear view
mirrors to the desired positions.
While pushing the “SET” button,
push button “1” or “2” until the
signal beeps.
If the selected button has
already been preset, the previ-
ously recorded position will be
overwritten.
■Recalling the memorized position
Check that the shift lever is set in “P”.
Turn the ignition key to the “ON” position. Push button “1” or “2” to recall
the desired position.
STEP1
STEP2
STEP3STEP3
STEP1
STEP2

22
1-3. Adjustable components
■Retained accessory power
Each memorized position (except for the steering wheel position) can be activated
within 30 seconds after the corresponding driver’s door is opened, even if the key is
removed from ignition switch.
■If any position memory button is pushed while the adjustments are being made
The operation will stop. To reactivate the sy stem, push the desired button (“1” or “2”)
again.
■If the battery is disconnected
The memorized positions must be reset be cause the computer's memory is erased
when the battery is disconnected.
CAUTION
■Seat adjustment caution
Take care during seat adjustment that the seat does not strike the rear passenger or
squeeze your body against the steering wheel.
If this happens, you can stop the movement by pressing another seat position mem-
ory button.

30
1-3. Adjustable components
Steering wheel
Auto tilt away and auto returnWhen the ignition key is removed,
the steering wheel returns to its
stowed position by moving up and
away to enable easier driver entry
and exit.
Insert the key into the ignition
switch returns the steering wheel
to the original position.
The steering wheel can be adjusted to a comfortable position while the key
is inserted in the ignition switch.
Up
Down
Toward the driver
Away from the driver
CAUTION
■While driving
Do not adjust th e steering wheel.
Doing so may cause the driver to mishandle the vehicle and an accident, resulting in
death or serious injury.

31
1
1-3. Adjustable components
Before driving
Inside rear view mirror
■To prevent sensor error
CAUTION
■While driving
Do not adjust the position of the mirror.
Doing so may lead to mishandling of the vehicle and an accident, or resulting in
death or serious injury.
In the “AUTO” mode, sensors are used to detect the headlights of vehicles
behind and automatically reduces the reflected light.
Turns “AUTO” mode on/off
The indicator comes on when
“AUTO” mode is turned ON.
The anti-glare mirror default
mode is “AUTO”. The anti-glare
mirror is automatically set to
“AUTO” whenever the ignition
key is turned to the “ON” posi-
tion.
To ensure correct functioning of the sensors,
do not touch or cover the sensors.

32
1-3. Adjustable components
Outside rear view mirrors
Folding the mirrorsPress the switch.
Pressing again will extend the mir-
rors.
Mirror angle can be adjusted using th e switch when the ignition key is in
“ACC” or “ON” position.
Select the mirror to adjust
(“L”: left or “R”: right)
Adjust the mirror up, down,
in, or out using the switch
■When the mirrors are fogged up
Turn on the outside rear view mirror defoggers to defog the mirrors. ( P. 1 8 2 )
■Auto anti-glare function
When the anti-glare inside rear view mirror is set to “AUTO” mode, the outside rear
view mirrors will activate in conjunction with the anti-glare inside rear view mirror to
reduce reflected light. ( P. 3 1 )

38
1-4. Opening and closing the windows and moon roof
Lock switchPress the switch down to lock pas-
senger window switches.
Use this switch to prevent children
from accidentally opening or clos-
ing a passenger window.
■The power windows can be operated when
The ignition key must be in the “ON” position.
■Linked door lock window operation
●The power windows can be opened and closed using the key. ( P. 5 )
●The power windows can be opened using the wireless remote control. ( P. 3 )
■Retained accessory power
The power windows can be operated for ap proximately 45 seconds even after the
ignition key is turned to the “ACC” or “LOCK” position. They cannot, however, be
operated once the driver’s or fr ont passenger’s door is opened.
■Jam protection function
If an object becomes caught between th e window and the window frame, window
travel is stopped and the window is opened slightly.
■Customization
Settings (e.g. linked door lock operation) can be changed. ( P. 3 8 9 )