Page 121 of 540
101
2-1. Driving procedures
2
When driving
Starting the hybrid system
Modes can be switched by pressing the power switch when carrying the 
electronic key on your person. (The hybrid system can be started in any 
mode by operating the switch at the same time as depressing the brake 
pedal.)
■Changing power switch mode
“OFF” mode
“A C C ”  m o d e
Some electrical components 
such as the audio system can be 
used. 
“IG-ON” mode 
All electrical components can 
be used. 
■Starting the hybrid system
Check that the parking brake is set. 
Turn off unnecessary lights and accessories.
Check that the shift lever is set in “P”. 
Sit in the driver’s seat and firmly depress the brake pedal. 
The power switch indicator turns green.
Press the power switch.
After a few seconds, the 
“READY” light will flash and 
come on with a beep sound.
The vehicle can move when the 
“READ
 Y” light is on, even if the 
engine is stopped.
STEP1
STEP2
STEP3
STEP4
STEP5 
     
        
        Page 128 of 540
108
2-1. Driving procedures
Turn signal lever
■Turn signals can be operated when
The power switch is in “IG-ON” mode.
■If the indicators flash faster than usual
Check that a light bulb in the front or rear 
 turn signal lights has not burned out.
Left turn
Right turn
Move and hold the lever part-
way to signal a lane change
The left hand signal will flash 
until you release the lever.
Move and hold the lever part -
way to signal a lane change
The right hand signal will flash 
until you release the lever. 
     
        
        Page 131 of 540
111
2-2. Instrument cluster
2
When drivingOdometer/trip meter and trip meter reset button
Changes the display
Resets the trip meter driving 
range to “0”.
Instrument panel light control
The brightness of the instrument panel lights excluding the clock and out-
side temperature display, can be adjusted. 
Brighter
Darker
Maximum brightness
Odometer
Displays the total distance the vehicle has been driven. 
Trip meter
Displays the distance the vehicle has been driven since the meter was last 
reset. Trip meters A and B can be used to record and display different dis-
tances independently. 
     
        
        Page 134 of 540
114
2-2. Instrument cluster
Indicators and warning lights
The indicator and warning lights on the instrument cluster and center 
panel inform the driver of the status of the vehicle’s various systems. 
Instrument cluster
The units used on the speedometer and some indicators may differ depend-
ing on the target region.
 Center panel 
     
        
        Page 136 of 540
116
2-2. Instrument cluster
CAUTION
■If a safety system warning light does not come on 
Should a safety system light such as ABS and the SRS airbag warning light not 
come on when you turn to “IG-ON” mode, this could mean that these systems are 
not available to help protect you in an accid ent, which could result in death or seri-
ous injury. Have the vehicle inspected by your Lexus dealer immediately if this 
occurs.
■ Warning lights
Warning lights inform the driver of  malfunctions in the indicated 
vehicle’s systems. ( P.  4 3 0 )
*: These lights turn on when the power switch is turned to “IG-ON” mode 
to indicate that a system check is  being performed. They will turn off 
after the hybrid system is on, or af ter a few seconds. There may be a mal -
function in a system if the lights do not come on, or turn off. Have the 
vehicle inspected by your Lexus dealer.
(U.S.A.)(Canada)(U.S.A.)(Canada)
(U.S.A.)(Canada)(if equipped)
*******
*****
* 
     
        
        Page 140 of 540
120
2-3. Operating the lights and windshield wipers
Headlight switch
Turning on the high beam headlights
With the headlights on, push the 
lever forward to turn on the high 
beams. 
Pull the lever back to the center 
position to turn the high beams off.
Pull the lever toward you to turn 
on the high beams. 
Release to turn them off. You can 
flash the high beams with the head-
lights on or off.
The headlights can be operated manually or automatically. 
The side marker, parking, 
tail, license plate and 
instrument panel lights 
turn on. 
The headlights and all  lights listed above turn 
on
 . 
The headlights and all the  lights listed above turn 
on and of
 f automatically. 
(When the power switch 
is in “IG-ON” mode.) 
U.S.A.
Canada 
     
        
        Page 141 of 540

121
2-3. Operating the lights and windshield wipers
2
When driving
AFS (Adaptive Front lighting System)
AFS improves visibility at intersectio ns and on curves by automatically 
adjusting the level of the headlights  according to vehicle speed and the 
degree of the tire angle that are controlled by steering input.
Operates at speeds of 6 mph (10 km/h) or higher.
■ Deactivating AFS
Press the switch to turn it OFF. 
The indicator turns on when 
the AFS is deactivated. 
■Daytime running light system
To make your vehicle more visible to other drivers, the headlights turn on automati -
cally (at a reduced intensity) whenever the  hy
 brid system is started and the parking 
brake is released. Daytime running lights are not designed for use at night.
■Headlight control sensor
The sensor may not function properly if an 
object is placed on the sensor, or anything 
that blocks the sensor is affixed to the wind-
shield.  
Doing so interferes with  the sensor detecting 
the level of ambient light and may cause the 
automatic headlight system to malfunction.  
     
        
        Page 142 of 540

122
2-3. Operating the lights and windshield wipers
■Automatic light off system
The headlights and tail lights turn off 30 seconds after a door is opened or closed if 
the power switch has been switched to “ACC” or turned “OFF” while  the headlights 
are turned on. (The lights turn off immediately if the button on the key is pressed 
after all doors are locked.)
To turn the lights on again,  switch to “IG-ON” mode, or  turn the light switch “OFF” 
once and then back to the or position. 
■Automatic headlight leveling system
The level of the headlights is automatica lly adjusted according to the number of 
passengers and the loading condition of the  vehicle to ensure that the headlights do 
not interfere with other road users. 
■If the indicator flashes...
It may indicate a malfunction in the system. Contact your Lexus dealer. 
■Customization
Settings (e.g. light sensor sensitivity) can be changed. ( P.  5 0 0 )
NOTICE
■To prevent 12 volt battery discharge
Do not leave the lights on longer than  necessary when the hybrid system is off.