Page 6 of 562
vi
Headlight (high beam) P. 116
Pictorial indexExterior
Turn signal light P. 104
Fog light P. 119
Side marker light P. 116
Headlight (low beam)  
P. 116
Hood P. 372
Parking light P. 116
Windshield wipers P. 120
Moon roof  P. 46
Outside rear view mirror 
P. 41 
     
        
        Page 131 of 562
111
2-2. Instrument cluster
2
When driving
■Indicators
The indicators inform the driver of  the operating state of the vehi-
cle’s various systems. 
Turn signal indicator  
( P.  1 0 4 )Cruise control indicator 
 (  P.  1 2 4 )
Headlight high beam indi-
cator ( P. 116)Damping mode indicator 
(GS430) ( P.  1 5 8 )
(U.S.A.)
Headlight indicator 
 (  P. 116)“AFS OFF” indicator  
( P. 117) 
(Canada)
Tail light indicator 
( P. 116) 
(if equipped)
Intuitive parking assist 
indicator ( P.  1 3 7 )
Fog light indicator 
( P.  1 1 9 )  Slip indicator ( P.  1 6 0 )
Shift position and shift 
range indicators  
( P.  1 0 2 )“VSC OFF” indicator 
(P.  1 6 0 )
“ECT PWR” indicator 
 (  P.  1 0 1 )SRS airbag on-off
indicator ( P.  7 2 )
“ECT SNOW” indicator 
 (  P.  1 0 1 )  
*
*
* 
     
        
        Page 136 of 562
116
2-3. Operating the lights and windshield wipers
Headlight switch
Turning on the high beam headlights
With the headlights on, push the 
lever forward to turn on the high 
beams. 
Pull the lever back to the center 
position to turn the high beams off.
Pull the lever toward you to turn 
on the high beams. 
Release to turn them off. You can 
flash the high beams with the head-
lights on or off.
The headlights can be operated manually or automatically. 
The side marker, parking, 
tail, license plate and 
instrument panel lights 
turn on. 
The headlights and all  lights listed above turn 
on
. 
The headlights and all the  lights listed above turn 
on and of
f automatically.
(When the engine switch 
is in “IG-ON” mode.) 
U.S.A.
Canada 
     
        
        Page 439 of 562
419
4-3. Do-it-yourself maintenance
4
Maintenance and care
■Engine compartment (Type B)
6: only for GS430 equipped with ac tive stabilizer suspension system
FuseAmpereCircuit
1FR CTRL-B25Headlight high beam, horn
2A/F15Exhaust system
3ETCS10
Multiport fuel injection system/
sequential multiport fuel injection 
system
4ALT-S7. 5  Charging system
5H-LP CLN30Headlight cleaner
6STB-AM30DC/DC converter
7A/C COMP7. 5  Air conditioning system
8DEICER25
9FR CTRL-AM30Front fog lights, parking lights, wind-
shield washer
10IG210Ignition system
11EFI NO.210Fuel system, exhaust system 
     
        
        Page 440 of 562
420
4-3. Do-it-yourself maintenance
FuseAmpereCircuit
12H-LP R LWR15Headlight low beam (right)
13H-LP L LWR15Headlight low beam (left)
14F/ P M P25Fuel system
15EFI
20 
(GS430) 25 
(GS350)Multiport fuel injection system/
sequential multiport fuel injection 
system
16INJ20
Multiport fuel injection system/
sequential multiport fuel injection 
system
17H-LP UPR15Headlight high beams
18HORN10Horns
19WA S H E R20Windshield washer
20FR TAIL10Parking lights
21FR FOG15Front fog lights 
     
        
        Page 449 of 562
429
4-3. Do-it-yourself maintenance
4
Maintenance and care
Headlight aim
■Gauges
High beam vertical position
Low beam vertical position
High beam horizontal posi -
tion
Low beam horizontal position
■ A
djustment bolts
High beam horizontal adjust-
ment
High beam vertical adjust-
ment
Low beam adjustment bolt A
Low beam adjustment bolt B
■ Befor
e checking the headlight aim
Make sure the vehicle has a full ta nk of gas and the ar
 ea around 
the headlight is not deformed.
Park the vehicle on level ground.
Sit in the driver’s seat.
Bounce the vehicle several times.STEP1
STEP2
STEP3
STEP4 
     
        
        Page 450 of 562
430
4-3. Do-it-yourself maintenance
■Adjusting the headlight aim
Low beam (vertical adjustment)
Using a Phillips-head screw-
driver, turn adjustment bolt A so 
that the bubble is within the 2 
center lines.
Remember the turning direction 
and the number of turns.
Turn bolt B the same number of 
turns and in the same direction 
as step 1.
Low beam (horizontal adjustment)
Turn adjustment bolt A so that the re d line on the gauge is in the middle 
of the “0” mark (within the blue lines to either side of the gaug\
e).
High beam (vertical and horizontal adjustment)
Turn each adjustment bolt in either  dir
 ection so that the bubble in 
within the 2 center lines (vertical), an d the red line on the gauge is in 
the middle of the “0” mark (within th e blue lines to either side of the 
gauge) (horizontal).
If you feel that there is a large de
 viation, have the headlight aim 
adjusted at a Lexus dealer.
STEP1
STEP2 
     
        
        Page 451 of 562
431
4-3. Do-it-yourself maintenance
4
Maintenance and care
Light bulbs
You may replace the following bulbs yourself. For more information about 
replacing other light bulbs, contact your Lexus dealer.
■Prepare a replacement light bulb.
Check the wattage of the light bulb being replaced. ( P
 . 507)
■ R
emove the engine compartment cover if necessary.
  P.
 3 7 8
■ F
ront bulb locations
■Rear bulb locations
Parking light
Headlight high beam
Rear turn signal light Back-up light