2007 Lancia Thesis tailgate

229
Boot lock opening/closing by remote control
Central door locking system condition
To open the
boot tailgate
To close
the boot tailgate
Off
Press tailgate button
When the boot is
closed, the lock
remains
unlockedBound to central door locking Not bound to central door locking
On
Press remote control
button
A(fig. 194),
then press the tailgate
button
or keep remote
control button
depressed
(more than 1 second)
When the boot is
closed, the lock
remains unlocked.
To lock the
tailgate lock, press
remote control button
B(fig. 194) On
Press remote control
button
A(fig. 194),
then press the tailgate
button
or keep remote
control button
depressed
(more than 1 second)
When the boot is
closed, the lock
remains unlocked.
To lock the
tailgate lock, press
remote control button
B(fig. 194) Off
Press remote control
button
A(fig. 194),
then press the tailgate
button
or keep remote
control button
depressed
(more than 1 second)
When the boot is
closed, the lock
remains unlocked.
The lock will automat-
ically lock when the
car speed
exceeds 20 km/h
FUNCTIONS THAT CAN BE
MODIFIED BY THE CONNECT
MENU
The CONNECT enables to switch
on/off the following functions:
– locking/unlocking the boot
together with central door
locking/opening– automatic locking of the boot,
door locks and fuel filler cap, when
the car speed exceeds 20 km/h.
To actuate these settings, refer to
the CONNECT supplement provid-
ed with the car.The following tables summarize
the operation logic of the boot lock,
depending on the functions that
have been actuated.

230
Boot lock opening/closing by metal insert of the key
Central door locking system condition
To open the
boot tailgate
To close
the boot tailgate
On
Turn the key clock-
wise in the
lock latch
When the boot is
closed, the lock
remains
unlocked.
To lock the
tailgate lock, turn the
key counterclockwise
in the lock latch Off
Turn the key clock-
wise in the
lock latch
When the boot is
closed, the lock
remains
unlocked.
To lock the
tailgate lock, turn the
key counterclockwise
in the lock latch.
In any case, the lock
will automatically
lock when the car
speed exceeds 20
km/hOn
Turn the key clock-
wise in the
lock latch
When the boot is
closed, the lock
remains
unlocked.
To lock the
tailgate lock, turn the
key counterclockwise
in the lock latch Off
Press the tailgate but-
ton
When the boot is
closed, the lock
remains
unlockedNot bound to central door locking Bound to central door locking

231
CLOSING THE BOOT
To close the bonnet,
lower it down until you lay
it on the lock, without
however slamming it. The lock is
electric and the bonnet will close
automatically. BOOT CEILING LIGHT (fig. 195)
The boot is lit by ceiling light A,
which switches on automatically
when the tailgate is opened.
The light switches off automatical-
ly when the tailgate is closed.
If the tailgate is left open, the ceil-
ing light will switch off after about
20 minutes: to switch it on again,
close and then open again the tail-
gate.LUGGAGE NETS
The boot is equipped with a fixed
net (fig. 196) set on the left side,
and (optional for versions/markets
where applicable) a mobile net.
fig. 195
L0A0180b
fig. 196
L0A0049b

272
JUMP STARTING
If the battery is flat, you can use
another battery to start the engine.
Its capacity must be the same or
slightly greater than the flat battery
(see the “Technical Specification”
chapter).
The battery is placed on the left
side of the boot, protected by a
cover.Before opening the lug-
gage compartment bonnet
to reload the battery or to
connect an auxiliary battery,
carefully read and comply with
the instructions contained in the
paragraph “If battery is to be dis-
connected” in the chapter “In an
emergency”.
Jump starting does not damage the
Lancia CODE system. Proceed as
follows:
1) Disconnect all electrical devices
that are not strictly useful.
2) Lift the boot tailgate by turning
the key metal insert clockwise in the
latch.3) Loosen the knob A(fig. 1) and
remove the protective cover B.
4) Press flanges A(fig. 2) and
remove the cover B.
5) Connect the positive terminals
(+) A(fig. 3) and Bof the two bat-
teries with a jump lead.
6) With a second lead connect first
the negative terminal (–) Cof the
auxiliary battery and then the earth
braid Dof the car to be started.
fig. 1
L0A0030b
fig. 2
L0A0031b
fig. 3
L0A0032b

273
7) Start the engine.
8) When the engine has started,
remove the leads in the reverse order
to before: D, C, Band finally A.
IMPORTANT If the engine fails to
start after a few attempts, do not keep
turning the key but have the car seen
to at a Lancia Dealership.
9) Put the cover back on the bat-
tery positive terminal by fitting the
lock flanges in.
10) Put the cover back and retight-
en the knob.
11) Close the boot tailgate.IMPORTANTWhen the tailgate is
closed, the boot latch is not locked.
To lock it, turn the metal insert of
the key anticlockwise in the latch.
Do not carry out this
procedure if you lack
experience: if it is not
done correctly it can cause very
intense electrical discharges and
the battery might even explode.
Do not to put naked flames or
lighted cigarettes near the battery
and do not cause sparks: risk of
explosion and fire.
Never use a battery
charger to jump start the
engine: you could damage
the electronic system, with spe-
cial reference to ignition and
injection control unit.
BUMP STARTING
Do not bump start by pushing,
towing or coasting downhill. This
way of starting could cause a rush of
fuel into the catalytic converter and
damage it beyond repair.
Remember that ifthe engine is not
running, the brake booster and the
power steering will not work. You
therefore have to use considerably
more effort on both the brake pedal
and the steering wheel.
Never connect the nega-
tive terminals of the two
batteries directly: sparks
could ignite the flammable gas
from the battery. If the auxiliary
battery is installed on another
car, prevent accidental contact
between the metal parts of the
two vehicles.

286
REAR LIGHT CLUSTER (fig. 26)
Taillights, direction indicators and
brake lights consists of leds built-
into the rear light cluster.
If the lights break down partially
or completely go to a Lancia
Dealership.REVERSING LIGHT AND REAR
FOG LIGHTS
Reversing lights and rear fog lights
are housed in the tailgate.
To replace the bulbs:
1) Open the tailgate and lift the
covering A(fig. 27) near the bulb to
be replaced.
2) Loosen the screw Band remove
the bulb holder C.3) Remove the clipped in glass
bulbs (fig. 28).
D- B type, 12V-P21W bulb for
reversing light.
E- B type, 12V-P21W bulb for
rear fog light.
4) After replacing the bulbs, refit
the bulb holder and fasten it with
the screw.
5) Lower the tailgate cover.
fig. 26
L0A0123b
fig. 27
L0A0124b
fig. 28
L0A0125b

293
FUSE LOCATION
The main fuses of THESIS are con-
tained into four fuse boxes, to be
found on the left side of the dash-
board, in the engine compartment,
on the battery and in the right side
compartment of the boot.
GENERAL FUSES
(MIDI-FUSE and MEGA-FUSE)
The car is fitted with a set of gen-
eral fuses (MIDI-FUSE and MEGA-
FUSE) which separately protect the
various electrical system functions in
addition to the individual device
fuses.
The general fuses are located in the
left side of the boot in a fusebox direct-
ly connected to the positive battery
terminal.To reach the fuses:
1) Open the tailgate.
2) Loosen knob A(fig. 68) and
remove the battery cover B.
3) Press tabs A(fig. 69) and
remove the cover B.The systems and devices protected
by the general fuses (fig. 70) are
listed on the following pages.
fig. 68
L0A0030b
fig. 69
L0A0031b
fig. 70
L0A0142b