2007 Lancia Musa tailgate

11
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
MAIN KEY WITH REMOTE CONTROL
The metal insert (A) of the key is grip-retractable.
The key operates:
❒the ignition switch;
❒driver’s door lock;
❒the fuel filler cap locking/unlocking (versions with fuel filler cap
with keylock)
❒passenger side airbag deactivation switch (where provided);
❒cut-in of door lock device D when the electric system is failing
(e.g. run-down battery);
❒cut-in of child lock safety device E on rear doors.
Button B opens the metal insert A.
To refit the metal insert A into the key grip:
– keep button B pressed
– move the metal insert A
– release button B and then turn the metal insert A until hearing the
click as it locks into place.
Button
Ëunlocks the doors, the tailgate and the fuel cap.
Button
Álocks the doors, the tailgate and the fuel cap.
Button
Runlocks the boot.
Led C (where required) comes on when sending the control to the receiver.
WARNINGButton B should only be pressed when the key is away from the body, in
particular from the eyes and from objects that can be spoilt (e.g. clothes). Make
sure the key can never be touched by others, especially children, who may
inadvertently press the button.
L0D0015m
L0D0246m

IMPORTANT The remote control system frequency can be disturbed
by significant radio transmissions outside the car (e.g: mobile phones,
HAM radio systems, etc.) that could cause remote control
malfunctioning.
Opening the doors and the tailgate
Press briefly button
Ë: for opening of the doors, tailgate, fuel lid,
timed switching on of passenger’s compartment lights and double
flashing of direction indicators.
Doors will be unlocked automatically if the fuel inertial cut-off
switch comes into operation.
Use the “Set-up menu” of the reconfigurable multifunction
display (see the relevant paragraph in section “Dashboard and
controls”) to set the system so that when pressing button
Ëonly
the driver’s door will open.
IMPORTANT The remote control system frequency can be
disturbed by significant radio transmissions outside the car (e.g:
mobile phones, HAM radio systems, etc.) that could cause remote
control malfunctioning.
Closing the doors and the tailgate
Press briefly button
Á: for remote locking of doors and tailgate, fuel
lid
, for switching the passenger’s compartment lights off and flashing
once the direction indicators.
12
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
L0D0016m

13
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
Deterrence led
When locking the doors, the led on button A switches on for about 3
seconds and than starts flashing (deterrence function). Once doors are
locked, if one or more doors or the tailgate are not closed correctly,
the led and direction indicators will start flashing quickly.
IMPORTANT The remote control system frequency can be disturbed
by significant radio transmissions outside the car (e.g: mobile phones,
HAM radio systems, etc.) that could cause remote control
malfunctioning.
Opening the tailgate from the outside
The tailgate can be opened from the outside by pressing and keeping
pressed the remote control button
R. Tailgate opening will obtain
double direction indicators flashing; tailgate closing is indicated by
one flashing.
IMPORTANT The remote control system frequency can be disturbed
by significant radio transmissions outside the car (e.g: mobile phones,
HAM radio systems, etc.) that could cause remote control
malfunctioning.
Locking doors from the inside
With doors closed, press button A or B set in the middle of the dashboard to respectively lock or unlock doors.
IMPORTANT Door locking from inside will not cut-in if one door is not prefectly closed or there is a system
failure.
If the cause of the failure is removed, the device will start working properly.
If the inside locking button is pressed accidentally, when getting out of the car only the doors used
will unlock whereas the tailgate will stay locked.To realign the system, press the lock / unlock
button again.
L0D0016m
L0D0100m

129
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
BOOT
The boot tailgate (when unlocked) can be opened only from the
outside through the electric opening handle set above the number
plate holder.
If doors are unlocked the boot can be opened at any time.
Through the set-up menu of the cluster display (see “Reconfigurable
multifunction display” in the present chapter) it is possible to activate
the “Independent boot unlocking”: in this way the boot is not
unlocked together with the doors; to open it press button
Ron the
remote control.
The tailgate opening is indicated by double flashing of direction
indicators.L0D0104m
L0D0016m
REAR MANUAL WINDOW CONTROLS
(where fitted)
Operate the handle to open or to close the window.
L0D0156m

130
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
TAILGATE CLOSING
First lower the tailgate using the appropriate handles, as shown in the
figure, and then push the tailgate until it clicks into place.
IMPORTANT If option “Independent boot” is on, before closing the
boot check whether you have with you the ignition key since the boot
will be locked automatically.
L0D0105m
The addition of objects (speakers, spoilers, etc.) on the rear shelf or boot lid, except those
envisaged by the manufacturer, may prevent the gas filled struts at the sides of the boot from
working properly.
WARNING
WARNING
When using the boot, make sure the loads do not exceed the permitted weight (see
“Technical specifications” chapter). Also make sure the items in the boot are
arranged properly to prevent them being thrown forwards and injuring
passengers should you brake sharply.
Never travel with objects on the rear shelf to prevent them being thrown forwards
and injuring passengers in case of accident or sharp braking.

131
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
EMERGENCY OPENING OF TAILGATE
To succeed in opening the tailgate from the inside, should the car
battery be flat, or because of a defect of the electric lock of the
tailgate, proceed as follows (refer to “Extending the boot” in this
section):
❒remove the rear head restraints;
❒tilt seat backrests to "table" configuration;
❒tilt cushion / backrest completely.
❒operate lever B, to obtain tailgate mechanical release, operating
from the inside of the boot.
REAR PARCEL SHELF REMOVAL
To remove the rear parcel shelf in order to extend the boot, proceed as
follows:
❒Front parcel shelf: release and turn the parcel shelf from its seat
and release the two pins from the side seats.
❒Rear parcel shelf: release the two pins from the side seats
L0D0338m
L0D0108m

275
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
IN AN
EMERGENCY
REAR LIGHT UNITS
To change the bulb, proceed as follows:
❒open the tailgate;
❒turn the fastener A counter-clockwise (for the left lid) or clockwise
(for the right lid) and remove the cover;
❒disconnect the electrical connector C;
❒slacken the two fastening nuts B;
❒to remove the headlight, pull it in perpendicular direction using
the handle on the headlight;
❒press the bulb holder tabs and remove it from its housing;
❒remove bulbs D - E - F - G lightly pushing them and turning them
counter-clockwise;
❒refit the bulb holder and make sure the two tabs are fastened and
then connect the electrical connector C; drive in the two fastening
nuts B; refit the cover checking that the tabs are fitted in their seat
and turning the fastener A counter-clockwise (for the left lid) or
clockwise (for the right lid) to hook it.
In the event of a failure (burnt-out bulbs) on taillights, brake lights
will switch on dimmed automatically in order to guarantee temporary
lighting at the back of the car.
After replacing the burnt-out bulb the taillights will operate regularly.
L0D0187m
L0D0188m

276
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
IN AN
EMERGENCY
ADDITIONAL BRAKING LIGHT (THIRD STOP)
To change the bulb, proceed as follows:
❒open the tailgate and open the two tailgate covering hinge plugs A;
❒press the two fastening tabs B set inside the two holes to release
the light unit;
❒close the tailgate and remove the light unit;
❒press the two fastening tabs C and remove the bulb holder;
❒remove the snap-fitted bulbs and replace them. The bulbs are arranged inside the light unit as follows:
D: sidelights / STOP
E: direction indicators
F: reversing light
G: rear fog lights
L0D0189m
L0D0355m
L0D0356m