Page 117 of 346
116
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
REAR FOG LIGHTS
These are turned on, with the dipped beam headlights or front fog
lights on, pressing button 4.
They are turned off pressing the button again or turning off the
dipped beam headlights or front fog lights
PARKING LIGHTS/NUMBER PLATE LIGHTS
They turn on only with the ignition key at STOP or removed, keeping
buttonFpressed for about 1 second.
IT is possible to select the parking lights only on side of the car
moving the direction indicator stalk to the required side.
L0D0083m
L0D0084m
Page 137 of 346

136
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
ROOF/SKI RACKS (where provided)
IMPORTANT Use roof/ski racks provided at Lineaccesori Lancia.
Always attain to the installation instructions provided with the kit
and have the roof racks installed by skilled personnel.
IMPORTANT Never exceed the max. permissible loads (see section
“Technical specifications”).
After few kilometers, check that fastening screws are firmly tightened.
HEADLIGHTS
ADJUSTING THE HEADLIGHT BEAM
Proper adjustment of the headlight beams is of vital importance for
your safety and comfort and also for the other road users. To ensure
you and other drivers have the best visibility conditions when
travelling with the headlights on, the headlights must be set properly.
Contact Lancia Dealership to have the headlights properly adjusted.
Headlight aiming device
The device can be operated with the ignition key at MAR and dipped
beam headlights on. When the car is loaded, it slopes backwards.
This means that the headlight beam rises. In this case, it is necessary
to return it to the correct position.
L0D0116m L0D0248m
Never activate the sunroof with roof racks mounted.
Page 138 of 346

137
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND
CONTROLS
To adjust the headlight slant
To adjust the headlight slant operate buttons
andÒlocated on the
dashboard.
The display provides the visual indication of the positions during the
adjustment operation.
Position 0 - one or two people occupying the front seats.
Position 1 - five people.
Position 2 - five people + load in the boot.
Position 3 - driver + maximum permissible load stowed in the boot.
IMPORTANT Check beam aiming every time the load carried
changes.
HEADLIGHT ADJUSTMENT ABROAD
The dipped-beam headlights are adjusted for circulation in the
country in which the vehicle is marketed. In countries with opposite
circulation, to avoid glaring oncoming vehicles, it is necessary to
cover the areas of the headlight as shown below: this is done using
non-transparent sticker tape.
Figures refer to passing from right-hand drive to left-hand drive.
L0D0116m
L0D0118m
L0D0119m
Page 202 of 346

Roof rack/ski rack
Remove the roof rack or the ski rack from the roof
as soon as they are no longer used. These
accessories lower air penetration and adversely
affect consumption levels. When needing to carry
particularly voluminous objects, preferably use a
trailer.
Electric devices
Use electric devices only for the amount of time
needed. Rear heated window, additional headlights,
windscreen wipers and heater fan need a
considerable amount of energy, therefore increasing
the requirement of current increases fuel
consumption (up to +25% in the urban cycle).Climate control
The air conditioner is an additional load which
greatly affects the engine leading to higher
consumption (on average up to +20%). When the
temperature outside the vehicle permits it, use the
air vents where possible.
Spoilers
The use of non-certified aerodynamic items may
adversely affect air drag and consumption levels.
201
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
Page 210 of 346

209
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
WARNING LIGHTS AND MESSAGES
GEAR NOT AVAILABLE ....................................... 228
MANOEUVRE NOT ENABLED ............................ 229
PRESS BRAKE PEDAL – REPEAT
MANOEUVRE ....................................................... 230
ENGAGE N ........................................................... 231
REAR FOGLIGHTS .............................................. 232
FRONT FOG LIGHTS ........................................... 232
LEFT-HAND DIRECTION INDICATOR ................ 232
RIGHT-HAND DIRECTION INDICATOR .............. 232
SIDELIGHTS AND LOW BEAMS ......................... 233
FOLLOW ME HOME ............................................ 233
MAIN BEAM HEADLIGHTS ................................. 233
CRUISE CONTROL .............................................. 234
POSSIBLE PRESENCE OF ICE ON THE ROAD .. 234
FUEL CUTOFF
SWITCHED ON .................................................... 235
CAR PROTECTION SYSTEM FAILURE -
LANCIA CODE ..................................................... 236
“DUALDRIVE” ELECTRIC POWER
STEERING FAILURE............................................ 237
DIESEL FUEL FILTER SENSOR FAILURE ......... 237
GLOW PLUG WARMING FAILURE...................... 237
ABS SYSTEM FAILURE - SYSTEM
UNAVAILABLE ..................................................... 238
RAIN SENSOR FAILURE ...................................... 238 GENERAL WARNINGS ......................................... 211
LOW BRAKE FLUID............................................. 212
HANDBRAKE ON ................................................. 212
FRONT PASSENGER AIR BAG DEACTIVATED... 213
SEAT BELTS NOT FASTENED............................. 213
LOW BATTERY CHARGE .................................... 214
LOW ENGINE OIL PRESSURE ............................ 214
ENGINE COOLANT FLUID HIGH
TEMPERATURE ................................................... 215
INCOMPLETE DOOR LOCKING .......................... 217
“DUALDRIVE” ELECTRIC POWER
STEERING SYSTEM ............................................ 217
SPEED LIMIT EXCEEDED ................................. 218
FUEL RESERVE ................................................... 218
WATER IN DIESEL FUEL FILTER ...................... 219
GLOW PLUGS ...................................................... 220
ASR - WHEEL ANTISKID SYSTEM ..................... 220
BRAKE PAD WEAR ............................................. 220
LOW TYRE PRESSURE ...................................... 221
GLOW FLAT TYRE ............................................. 222
REDUCE GEARS .................................................. 224
MANUAL MODE NOT AVAILABLE...................... 224
AUTOMATIC MODE NOT AVAILABLE ................ 225
CLUTCH OVERHEATING .................................... 226
PRESS BRAKE PEDAL – DELAYED STARTING ... 227
Page 234 of 346
233
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
Warning
light on
dial Message on
multifunction
display
SIDELIGHTS AND LOW BEAMS
The warning light on the dial turns on when sidelights, parking lights
or low beams are turned on. The warning light on the dial will also
turn on when the daylight sensor (where provided) turns the lights
on.
FOLLOW ME HOME
The warning light on the dial comes on (on certain versions, together
with the message on the display) when the “Follow me home” device
is activated (see “Follow me home” in section “Dashboard and
controls”).
MAIN BEAM HEADLIGHTS
The warning light on the dial turns on when the main beams are
turned on.3
1
3
green
green
blue
Page 241 of 346
240
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
EXTERNAL LIGHT FAILURE
The warning light on the dial turns on (together with the message on
the display) when one of the following failures is detected: broken
circuit, “missing” or burnt-out bulb, wrong bulb power. Light check
concerns: taillights, brake lights (3rd stop light excluded), rear fog
lights, headlights, direction indicators and number plate lights.
The failure referring to these lights could be: one or more blown
bulbs, a blown protection fuse or a cut-off electric connection.
Symbols
¯/˙(where provided) coming on on the display indicate a
left/right-hand light failure.
W
amber
continued
Warning
light on
dialMessage on
multifunction
display
Page 242 of 346
241
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICALSPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT
USE OF
THE CAR
WARNING
LIGHTS AND
MESSAGES
WEXTERNAL LIGHT FAILURE
The warning light on the dial turns on (together with the message on
the display) when one of the following failures is detected: broken
circuit, “missing” or burnt-out bulb, wrong bulb power. Light check
concerns: taillights, brake lights (3rd stop light excluded), rear fog
lights, headlights, direction indicators and number plate lights.
The failure referring to these lights could be: one or more blown
bulbs, a blown protection fuse or a cut-off electric connection.
Symbols¯/˙coming on on the display indicate a left/right-hand
light failure.amber
continued from previous page
(*)
(*) Or rear
Warning
light on
dial Message on
multifunction
display