2007 HYUNDAI VERACRUZ maintenance

[x] Cancel search: maintenance

Page 397 of 441

HYUNDAI VERACRUZ 2007  Owners Manual 743
Maintenance
FUSESG210000AENA vehicle’s electrical system is protected
from electrical overload damage by
fuses.This vehicle has 3 fuse panels, one locat-
ed in the driver’s side panel bolster,

Page 398 of 441

HYUNDAI VERACRUZ 2007  Owners Manual Maintenance44 7G210100AENInstrument panel fuse replace-
ment1. Turn the ignition switch and all other
switches off.
2. Open the fuse panel cover.3. Pull the suspected fuse straight out.
Use the remova

Page 399 of 441

HYUNDAI VERACRUZ 2007  Owners Manual 745
Maintenance
G210101AUNMemory fuseYour vehicle is equipped with a memory
fuse to prevent battery discharge if your
vehicle is parked without being operated
for prolonged periods. Use the following

Page 400 of 441

HYUNDAI VERACRUZ 2007  Owners Manual Maintenance46 73. Check the removed fuse; replace it if it
is blown. To remove or insert the fuse,
use the fuse puller in the engine com-
partment fuse panel.
4. Push in a new fuse of the same rating,

Page 401 of 441

HYUNDAI VERACRUZ 2007  Owners Manual 747
Maintenance
✽ ✽
NOTICENot all fuse panel descriptions in this
manual may be applicable to your vehi-
cle. It is accurate at the time of printing.
When you inspect the fuse panel in your
vehicl

Page 402 of 441

HYUNDAI VERACRUZ 2007  Owners Manual Maintenance48 7Instrument panel fuse panel
Description Fuse rating Protected component
AUDIO-2  10A  Audio, Console & rear power outlet relay, Digital clock, BCM, PIC immobilizer module, 
ATM key lock

Page 403 of 441

HYUNDAI VERACRUZ 2007  Owners Manual 749
Maintenance
Description Fuse rating Protected component
DR LOCK  20A  Power window main switch, Power tailgate relay, Tailgate lock actuator relay
STOP LP  15A  Stop lamp switch 
ADJ-PEDAL  15A  A

Page 404 of 441

HYUNDAI VERACRUZ 2007  Owners Manual Maintenance50 7Engine compartment main fuse panel
Description Fuse rating Protected component
IGN 1  40A  Ignition switch(ACC, IG1) 
IGN 2  40A  Start relay, Ignition switch(IG2, START) 
I/P B+1  50A