2007 HUMMER H3 remote control

5. After entering the switch settings, press and
release all three buttons at the same time.
The indicator lights will turn on.
6. Press and hold the button you would like to use
to control the garage door until the garage door
moves. The indicator light above the selected
button should slowly blink. You may need to
hold the button from ve to 55 seconds.
7. Immediately release the button when the
garage door moves. The indicator light will
blink rapidly until programming is complete.
8. Press and release the button again. The
garage door should move, conrming that
programming is successful and complete.
To program another device such as an additional
garage door opener, a security device, or home
lighting, repeat Steps 1–8, choosing a different
function button in Step 7 than what you used for the
garage door opener.Programming Universal Home
Remote — Rolling Code
Rolling code garage door openers are used for
garage doors produced after 1996 and are
code protected. Rolling code means the coded
signal is changed every time your remote control
garage door opener is used.
Programming a rolling code garage door opener
involves time-sensitive actions, so read the
entire procedure before you begin. If you do not
follow these actions, the device will time out
and you will have to repeat the procedure.
Follow these steps to program up to three channels:
1. Press the two outside buttons at the same
time for one to two seconds, and immediately
release them.
137

2. Go to the garage. Locate the garage door
motor head and press and release the
“learn” button.
After pressing the “learn” button, you have
10 to 30 seconds to complete Step 4
depending on your garage control unit. If you
cannot locate the “learn” button, refer to
the owners guide for your garage door opener.3. Press and hold the button you would like to use
to control the garage door until the garage door
moves. The indicator light, above the selected
button, should slowly blink. You may need to
hold the button from ve to 20 seconds.
4. Immediately release the button when the
garage door moves. The indicator light will
blink rapidly until programming is complete.
5. Press and release the button again. The
garage door should move, conrming that
programming is successful and complete.
To program another device such as an additional
garage door opener, a security device, or
home lighting, repeat Steps 1–5, choosing a
different function button in Step 3 than what you
used for the garage door opener.
Using Universal Home Remote
Press and hold the appropriate button for at least
half of a second. The indicator light will come
on while the signal is being transmitted.
138

Tires (cont.)
Chains..................................................... 389
Changing a Flat Tire................................ 391
Cleaning.................................................. 413
Different Size........................................... 385
If a Tire Goes Flat................................... 390
Ination - Tire Pressure............................ 375
Inspection and Rotation............................ 381
Installing the Spare Tire........................... 396
Pressure Monitor System......................... 376
Removing the Flat Tire............................. 396
Removing the Spare Tire and Tools......... 393
Spare Tire................................................ 405
Storing a Flat or Spare Tire and Tools..... 403
Tire Sidewall Labeling.............................. 368
Tire Terminology and Denitions............... 372
Uniform Tire Quality Grading.................... 386
Wheel Alignment and Tire Balance........... 387
Wheel Replacement................................. 387
When It Is Time for New Tires................. 383
Towing
Recreational Vehicle................................. 295
Towing a Trailer....................................... 297
Your Vehicle............................................. 294Traction
Control System (TCS) .............................. 241
Off Light.................................................. 184
StabiliTrak
®System................................. 244
Trailer
Recommendations.................................... 310
Transmission
Fluid, Automatic....................................... 329
Fluid, Manual........................................... 332
Up-Shift Light........................................... 181
Transmission Operation, Automatic.............. 106
Transmission Operation, Manual.................. 109
Trip Odometer............................................. 176
Turn and Lane-Change Signals................... 156
Turn Signal/Multifunction Lever.................... 155
U
Understanding Radio Reception................... 230
Uniform Tire Quality Grading....................... 386
Universal Home Remote System........132, 133
Operation........................................134, 139
Up-Shift Light.............................................. 181
479