2007 HUMMER H2 lock

Seats and Restraint Systems
....................... 7
Front Seats
.............................................. 8
Rear Seats
............................................. 15
Safety Belts
............................................ 24
Child Restraints
...................................... 46
Airbag System
........................................ 77
Restraint System Check
......................... 90
Features and Controls
................................ 93
Keys
....................................................... 95
Doors and Locks
.................................. 100
Windows
............................................... 111
Theft-Deterrent Systems
....................... 115
Starting and Operating Your Vehicle
....... 119
Mirrors
.................................................. 139
OnStar
®System
................................... 144
Universal Home Remote System
.......... 148
Storage Areas
...................................... 160
Sunroof
................................................ 168Instrument Panel
....................................... 171
Instrument Panel Overview
................... 174
Climate Controls
................................... 197
Warning Lights, Gages, and
Indicators
.......................................... 204
Driver Information Center (DIC)
............ 222
Audio System(s)
................................... 241
Driving Your Vehicle
................................. 301
Your Driving, the Road, and
Your Vehicle
..................................... 302
Towing
................................................. 369
Service and Appearance Care
.................. 389
Service
................................................. 392
Fuel
...................................................... 394
Checking Things Under the Hood
......... 400
Rear Axle
............................................. 437
Four-Wheel Drive
.................................. 438
Front Axle
............................................ 440
2007 HUMMER H2 Owner ManualM
1

Notice:Folding a rear seat with the safety
belts still fastened may cause damage to the
seat or the safety belts. Always unbuckle
the safety belts and return them to their normal
stowed position before folding a rear seat.
3. Pull the seatback forward and fold it down until
it is at.
If the seatback cannot fold at because it
interferes with the cushion, try moving the front
seat forward and/or bringing the front
seatback more upright.
4. Repeat the steps for the other half of the
60/40 split bench seat.Returning the Seats to an Upright
Position
{CAUTION:
If the seatback is not locked, it could
move forward in a sudden stop or crash.
That could cause injury to the person
sitting there. Always push and pull on the
seatback to be sure it is locked.
{CAUTION:
A safety belt that is improperly routed, not
properly attached, or twisted will not
provide the protection needed in a crash.
The person wearing the belt could be
seriously injured. After raising the rear
seatback, always check to be sure that the
safety belts are properly routed and
attached, and are not twisted.
16

Unfolding the Seatback
{CAUTION:
If the seatback is not locked, it could
move forward in a sudden stop or crash.
That could cause injury to the person
sitting there. Always push and pull on the
seatback to be sure it is locked.
To return the seatback to the passenger position,
do the following:
1. Pull up on the
release lever
labeled 1 and then
pull up on the
seatback until the
seatback locks
into the upright
position.
2. Push forward on the seatback to make sure it
is locked into position.
Tilting the Seat
1. Fold the seatback forward using the
instructions listed previously.
2. Unlatch the seat
from the oor by
pulling up on
the lever labeled 2,
located on the
rear of the seat.
3. Lift the rear of the seat up from the oor and
push it forward until it locks into place. You
will not be able to unlatch the seat from
the oor unless the seatback is folded down.
The seat will now remain locked in the upright
position.
18

Returning the Seat from a Tilted to an
Upright Position
{CAUTION:
If the seatback is not locked, it could
move forward in a sudden stop or crash.
That could cause injury to the person
sitting there. Always push and pull on the
seatback to be sure it is locked.To return the seatback to an upright position, do
the following:
1. Pull the lever labeled 3 toward you.
2. While still holding lever 3 toward you, grasp
the top of the seat and pull it toward you
slightly.
19

3. Let go of lever 3 and pull the seat
completely down.
4. Push down on the seat rmly. Try pulling it up
to be sure it is locked into place.
5. Pull up on the
release lever
labeled 1 and then
pull up on the
seatback until the
seatback locks into
the upright position.Removing the Seat
To remove the seat, do the following:
1. Open the liftgate.
Notice:Folding a rear seat with the safety
belts still fastened may cause damage to the
seat or the safety belts. Always unbuckle
the safety belts and return them to their normal
stowed position before folding a rear seat.
2. Fold the seatback
forward onto the
seat cushion
by using the lever
labeled 1. The
seat cannot
be removed unless
the seatback is
folded.
20

Installing the Seat
{CAUTION:
If the seatback is not locked, it could
move forward in a sudden stop or crash.
That could cause injury to the person
sitting there. Always push and pull on
the seatback to be sure it is locked.
{CAUTION:
A seat that is not locked into place
properly can move around in a collision or
sudden stop. People in the vehicle could
be injured. Be sure to lock the seat into
place properly when installing it.
{CAUTION:
A safety belt that is improperly routed, not
properly attached, or twisted will not
provide the protection needed in a crash.
The person wearing the belt could be
seriously injured. After raising the rear
seatback, always check to be sure that the
safety belts are properly routed and
attached, and are not twisted.
22

To install the seat, do the following:
1. While holding the rear of the seat up, slide the
front wheels into the slots on the oor. The
front latches should lock into place. If the
latches do not lock, try tilting the rear of the
seat upward.
2. Once the latches are engaged, pull up on
the lever labeled 3 to allow the seat to drop
into place.3. Pull up on the lever labeled 1 to return the
seatback to its upright position.
4. Push and pull on the seat to make sure it is
locked into place. The seatback cannot be
raised to the upright position unless the seat is
secured to the oor.
23

Q:If I am a good driver, and I never drive far
from home, why should I wear safety belts?
A:You may be an excellent driver, but if you are
in an accident — even one that is not your
fault — you and your passengers can be hurt.
Being a good driver does not protect you
from things beyond your control, such as
bad drivers.
Most accidents occur within 25 miles (40 km)
of home. And the greatest number of
serious injuries and deaths occur at speeds
of less than 40 mph (65 km/h).
Safety belts are for everyone.
How to Wear Safety Belts Properly
This part is only for people of adult size.
Be aware that there are special things to know
about safety belts and children. And there
are different rules for smaller children and babies.
If a child will be riding in your vehicle, see
Older Children on page 46orInfants and Young
Children on page 49. Follow those rules for
everyone’s protection.
First, you will want to know which restraint
systems your vehicle has.
We will start with the driver position.
Driver Position
Lap-Shoulder Belt
The driver has a lap-shoulder belt. Here is how
to wear it properly.
1. Close and lock the door.
2. Adjust the seat so you can sit up straight.
To see how, see “Seats” in the Index.
29