2007 HONDA CR-V tailgate

[x] Cancel search: tailgate

Page 87 of 352

HONDA CR-V 2007 RD1-RD5, RE7 / 3.G Owners Manual To lock any passenger’s door when
getting out of the vehicle, pull the
lock tab rearward and close the door.
To lock the driver’s door, remove the
key f rom the ignition switch, pull the
locktabre

Page 88 of 352

HONDA CR-V 2007 RD1-RD5, RE7 / 3.G Owners Manual Pushandholdthefrontof the
master door lock switch on the
driver’s door. You will hear a
clicking sound, and af ter about 5
seconds, you will hear another
clicking sound.
Release the switch and then,

Page 89 of 352

HONDA CR-V 2007 RD1-RD5, RE7 / 3.G Owners Manual Make sure the shif t lever is in
Park (P), and open the driver’s
door.
Turn the ignition switch to the ON
(II) position.
Set the parking brake.Make sure the shif t lever is in
Park (P), and close th

Page 90 of 352

HONDA CR-V 2007 RD1-RD5, RE7 / 3.G Owners Manual Release the switch and then, 
within 5 seconds, turn the ignition
switch to the ACCESSORY (I)
position. Pushandholdthefrontof the
master door lock switch on the
driver’s door. You will hear a
clicki

Page 91 of 352

HONDA CR-V 2007 RD1-RD5, RE7 / 3.G Owners Manual Push and hold the brake pedal,
then move the shift lever out of
Park (P).
Pushandholdtherearof the
master door lock switch on the
driver’s door. You will hear a
clicking sound. Continue to hold
down

Page 92 of 352

HONDA CR-V 2007 RD1-RD5, RE7 / 3.G Owners Manual Unlocks the driver’s door or all doorsand the tailgate when the shif t lever ismoved to Park (P).
Make sure the shif t lever is in
Park (P), and close the driver’s
door.
Turn the ignition switch t

Page 93 of 352

HONDA CR-V 2007 RD1-RD5, RE7 / 3.G Owners Manual µ
µ µ
Press this button once
to unlock the driver’s door. Push it
twice to unlock the remaining doors
and the tailgate. Some exterior lights
will f lash twice each time you press
the button.
P

Page 94 of 352

HONDA CR-V 2007 RD1-RD5, RE7 / 3.G Owners Manual Avoid dropping or throwing the
transmitter.
Protect the transmitter from
extreme temperature.
Do not immerse the transmitter in
any liquid.
If you lose a transmitter, the
replacement needs to be
repro