2007 HONDA CR-V door lock

[x] Cancel search: door lock

Page 63 of 352

HONDA CR-V 2007 RD1-RD5, RE7 / 3.G Owners Manual Î
ÎÎ
The U.S. instrument panel is shown. Dif f erences f or the Canadian models are noted in the text.
Instrument Panel
Inst rument s and Cont rols
59
IMMOBILIZER
SYSTEM
INDICATOR
CHARGING
SYSTE

Page 68 of 352

HONDA CR-V 2007 RD1-RD5, RE7 / 3.G Owners Manual This indicator  normally comes on for
a  few  seconds  when you turn  the
ignition  to the  ON  (II) position.
If  it comes  on while  driving,  it
indicates  that one or more  of your
vehicl e’s ti

Page 83 of 352

HONDA CR-V 2007 RD1-RD5, RE7 / 3.G Owners Manual Youshouldhavereceivedakey
number tag with your keys. You will
need this key number if you ever
have to get a lost key replaced. Use
only Honda-approved key blanks.
These keys contain electronic
circui

Page 85 of 352

HONDA CR-V 2007 RD1-RD5, RE7 / 3.G Owners Manual µµ
µ
µ
The ignition switch has f our
positions: LOCK (0), ACCESSORY
(I), ON (II), and START (III). If the f ront wheels are turned, the
anti-theft lock may make it difficult
to turn the key. F

Page 86 of 352

HONDA CR-V 2007 RD1-RD5, RE7 / 3.G Owners Manual To lock all doors and the tailgate,
push the front of the master door
lock switch on either f ront door,
pull the locktabrearwardonthe
driver’s door, or use the key on the
outside lock on the driver

Page 87 of 352

HONDA CR-V 2007 RD1-RD5, RE7 / 3.G Owners Manual To lock any passenger’s door when
getting out of the vehicle, pull the
lock tab rearward and close the door.
To lock the driver’s door, remove the
key f rom the ignition switch, pull the
locktabre

Page 88 of 352

HONDA CR-V 2007 RD1-RD5, RE7 / 3.G Owners Manual Pushandholdthefrontof the
master door lock switch on the
driver’s door. You will hear a
clicking sound, and af ter about 5
seconds, you will hear another
clicking sound.
Release the switch and then,

Page 89 of 352

HONDA CR-V 2007 RD1-RD5, RE7 / 3.G Owners Manual Make sure the shif t lever is in
Park (P), and open the driver’s
door.
Turn the ignition switch to the ON
(II) position.
Set the parking brake.Make sure the shif t lever is in
Park (P), and close th