2007 HONDA CIVIC SEDAN lock

Release the switch and, within 5
seconds, turn the ignition switch
to the ACCESSORY (I) position.
On A/T vehicles, move the shift
lever to the P position.
Turn the ignition switch to the
LOCK (0) position.
5.
6.
Door L ocks
82
master door lock switch on the
driver’s door. You will hear a click. Keep holding the switch until you
hear another click (after about 5 seconds). Push and hold the front of the
4.Locks all doors when the vehi cl e's speed
reaches about 9 mph (15 km/h).
Apply the parking brake.
On A/T vehicles, push and hold
the brake pedal, and move the
shift lever out of P.
1.
3.
To program the Drive Lock mode:
A/T models
Turn the ignition switch to the ON
(II) position, and close the driver’s
door.
2.
Pushandholdthe
front of the
master door lock switch on the
driver' s door. You will hear a
click. Keep holding the switch
until you hear another click (after
about 5 seconds).
Release the switch and, within 5
seconds, turn the ignition switch
to the LOCK (0) position.
4.
5.

The driver’s door or all doors can be
set to unlock automatically in two
CONT INUED
Door L ocks
A uto Door Unlock Modes
Inst rument s and Cont rols
83
modes for automatic transmissionvehicles (Park Unlock mode or
Ignition Switch Unlock mode) and
one mode for manual transmission
vehicles (Ignition Switch Unlock
mode). The default setting from the
factory is the driver’s door unlocks in
Park Unlock mode (A/T) or IgnitionSwitch Unlock mode (M/T). To
program modes, refer to the following
instructions.
Apply the parking brake.
Turn the ignition switch to the ON
(II) position, and open the driver’s
door.
On A/T vehicles, move the shift
lever to P.
1.
2.
3.
To turn off the Auto Door Lock
modes:Push and hold the front of the
master door lock switch on the
driver' s door until you hear a
click (af ter about 5 seconds).
Release the switch and, within
5 seconds, turn the ignition
switch to the LOCK (0) position.
4.
5.

Apply the parking brake.
Turn the ignition switch to the ON
(II) position, and close the driver’s
door.
1.
2.
Unlocks the driver’s door or all doors
when the i gnition switch is moved out of the ON (II) position.
Door L ocks
To program the Ignition SwitchUnlock mode:
84
A/T models
Move the shift lever to P, and close
the driver’s door.
Turn the ignition switch to the ON
(II) position. Apply the parking brake.
1.
2.
3.
To program the Park Unlock mode:
Unlocks the driver’s door or all doorsWhen the shift lever is moved into thePark (P) position (automatic
transmission vehicles only).
• U ntil you hear another click (after about 5 seconds) to activate
driver's door unlock, or
• U ntil you hear two more clicks
(af ter about 10 seconds) to
activate all doors unlock .
Release the switch and, within 5
seconds, turn the ignition switch
to the LOCK (0) position. Pushandholdtherearof the
master door lock switch on the
driver' s door. You will hear a
click. Continue to hold the switch:
4.
5.

CONT INUED
Door L ocks
Inst rument s and Cont rols
85
On A/T vehicles, push and hold
the brake pedal, then move the
shift lever out of P.
Pushandholdtherearof the
master door lock switch on the
driver’ s door. You will hear a
click. Continue to hold the switch:
• Until you hear another click
(after about 5 seconds) to
activate driver's door unlock, or
• U ntil you hear two more clicks
(af ter about 10 seconds) to
activate all doors unlock .
Release the switch and, within 5
seconds, turn the ignition switch
to the ACCESSORY (I) position.
On A/T vehicles, move the shift
lever to P.
3.
4.
5.
Turn the ignition switch to the
LOCK (0) position.
6.
Turn the ignition switch to the ON
(II) position, and open the driver’s
door.
On A/T vehicles, move the shift
lever to P. Apply the parking brake.
1.
2.
3.
To turn off the Auto Door Unlock
modes:
Release the switch and, within 5
seconds, turn the ignition switch to
the LOCK (0) position. P ush
a
ndholdtherearof the
master door lock switch on the
driver’ s door. You will hear a click
and, af ter about 5 seconds, you
will hear another click.
4.
5.

Even though your vehicle's battery is
removed or goes dead, the system
keeps the auto door lock/unlock
setting you selected.
Door L ocks
86

Parents should decide if their
children should be shown how to use
this feature.
As
a safety feature, your vehicle has
a release lever on the trunk latch so
the trunk can be opened from inside.
To open the trunk, push the release
lever to the left.
To
open the trunk, pull the trunk
release handle on the left side of the
driver’s seat. To pro tect items in the
trunk when you need to give the key
to someone else, lock the trunk
release handle with the master key,
and give the other person the valet
key.
For more information about child
safe ty, see page .
Press
and hold the trunk release
button on the remote transmitter. You
can also use the master key to
open the trunk.
To close the trunk, press down on
the trunk lid.
Keep the trunk lid closed at all times
while driving to avoid damaging it,
and to prevent exhaust gas from
getting into the interior. See
,page . 51
37
OnU.S.EXandSimodels
Emergency T runk Opener
Carbon
Monoxide Hazard
Trunk
Inst rument s and Cont rols
87
MASTER KEY
MASTER KEY PULL
TRUNK RELEASE
HANDLE RELEASE LEVER

µµ
µ
µ
Press this button once to
lock all doors. Some exterior lights
will f lash once. When you push
LOCK twice within 5 seconds, you
will hear a horn to verif y that the
doors are locked. You cannot lock
the doors if any door is not f ully
closed or the key is in the ignition
switch. If you unlock the doors with the
remote transmitter, but do not open
any of the doors within 30 seconds,
the doors automatically relock. On
U.S. LX, EX and Si models, the
security system will also set.
Pressthisbuttonfor
about 1 second to attract attention;
the horn will sound, and the exterior
lights will f lash f or about 30 seconds.
To cancel panic mode, press any
other button on the remote
transmitter, or insert the key.
Press this
button f or about 1 second to open
the trunk. You cannot open the trunk
if the key is in the ignition switch.
The ceiling light (if the ceiling light
switch is in the door activated
position) will come on when you
press the UNLOCK button. If you do
not open any door, the light stays on
f or about 30 seconds, then f ades out.
If you relock the doors with the
remote transmitter before 30
seconds have elapsed, the light goes
of f immediately. Press this button once
to unlock the driver’s door. Push it
twice to unlock the other doors.
Some exterior lights will f lash twice
each time you press the button. This
button does not work when the key
is in the ignition switch. If you push the LOCK button twice
within 5 seconds, you will hear a
horn to verify that the security
system has set.
On U.S. LX, EX and Si models
OnU.S.EXandSimodels
LOCK PA NIC
T RUNK REL EA SE
UNL OCK
Remote Transmitter
88
LOCK
BUTTON
TRUNK
RELEASE
BUTTON
PANIC BUTTON
UNLOCK BUTTON
PANIC BUTTON UNLOCK
BUTTON
LOCK
BUTTON
U.S. EX and Si models
U.S.: LX model
Canadian: LX, DX-G and EX models

Avoid dropping or throwing the
transmitter.If it takes several pushes on the
button to lock or unlock the doors,
replace the battery as soon as
possible.
Battery type: CR1616
To replace the battery:Remove the screw at the base of
the transmitter with a small
Phillips-head screwdriver.
Separate the transmitter by prying
its middle seam with your
f ingernail.
If you lose a transmitter, the
replacement needs to be
reprogrammed by your dealer. Do not immerse the transmitter in
any liquid. Protect the transmitter from
extreme temperature.
1.
2.
CONT INUED
Replacing the Transmitter Battery
Remote Transmitter Care
Remote Transmitter
Inst rument s and Cont rols
89
SCREW