2007 HONDA ACCORD SEDAN flat tire

[x] Cancel search: flat tire

Page 164 of 293

HONDA ACCORD SEDAN 2007  Owners Manual (in English) Removing parts f rom your vehicle,
or replacing components with
af termarket components could
seriously af f ect your vehicle’s
handling, stability, and reliability.Lowering the vehicle with an
afte

Page 189 of 293

HONDA ACCORD SEDAN 2007  Owners Manual (in English) When preparing  to tow,  and before
driving  away, be sure  to check  the
following:
The  vehicle  has been  properly
serviced,  and the tires,  brakes,
suspension,  cooling system,  and
lights  are i

Page 229 of 293

HONDA ACCORD SEDAN 2007  Owners Manual (in English) Keeping the tires properly inf lated
provides the best combination of
handling, tread lif e, and riding
comf ort.Underinf lated tires wear unevenly,
adversely affect handling and fuel
economy, and are

Page 230 of 293

HONDA ACCORD SEDAN 2007  Owners Manual (in English) If you  check  air pressures  when the
tires  are hot  (driven  for several
miles),  you will see readings  4 to  6
psi  (30  to 40  kPa,  0.3 to 0.4  kgf/cm  )
higher  than  the  cold  readings.  Thi

Page 240 of 293

HONDA ACCORD SEDAN 2007  Owners Manual (in English) This section covers the more
common problems that motorists
experience with their vehicles. It
gives you inf ormation about how to
safely evaluate the problem and what
to do to correct it. If the prob

Page 241 of 293

HONDA ACCORD SEDAN 2007  Owners Manual (in English) Check the inflation  pressure  of the
compact  spare tire every  time you
check  the other  tires. It should  be
inflated  to:
Follow  these precautions:
Never  exceed  50 mph  (80 km/h).
This  tire g

Page 242 of 293

HONDA ACCORD SEDAN 2007  Owners Manual (in English) CONT INUED
Park the vehicle on f irm, level and
non-slippery ground. Put the
transmission in Park (automatic)
or reverse (manual). Apply the
parking brake.The tools are in the trunk. Open
the trunk an

Page 243 of 293

HONDA ACCORD SEDAN 2007  Owners Manual (in English) The jack is behind a cover in the
right f ender. Remove the cover by
turning the handle counterclock-
wise, then pulling on the cover.Turn the jack’s end bracket
counterclockwise to loosen it, then
Page:   1-8 9-16 next >