2007 GMC YUKON set clock

13
Setting the Speed Compensated
Volume (if equipped)
With Speed Compensated Volume, the
radio automatically adjusts the volumeto compensate for road noise as vehiclespeed changes.
To set Speed Compensated Volume:
1. Set the radio volume to the desired
level.
2. Press the MENU button to display the
radio setup menu.
3. Press the pushbutton below the auto
volume label on the radio display.
4.Press the pushbutton under the
desired setting (Off, Low, Medium
or High) to select the level ofcompensation.
The compensation will be set once the
display times out after 10 seconds.
Setting the Time
To set the time:
1.Press the (Clock) button. Or, if
equipped, press the MENU button
until the clock option is displayed;
and then press the pushbutton located under the clock option label. The
HR, MIN, MM, DD, YYYY labels will
appear on the display.
2. Press the pushbutton under any of
the labels to be changed.
3.Press the pushbutton again, the right
SEEK arrow or the FWD button toincrease the numbers. Press the leftSEEK arrow or the REV button todecrease the numbers. Rotating theTune knob also will increase or
decrease the selected label.
4. Press the Clock or MENU button
again to set the currently displayedtime and date.
MP3 Capability
Your audio system has MP3 playing
capability. A CDR containing MP3 audiotracks will play automatically when
inserted into the CD player. An MP3symbol will be displayed.
Portable Audio Player
A portable audio player, such as an MP3
player or cassette player, can be connected to the auxiliary input jack locatedon the radio. When connected, the radioautomatically begins playing audio fromthe player over the vehicle speakers.
Radio Data System (if equipped)
When you tune to a Radio Data System
(RDS) station, the station name and callletters will appear on the display instead
of the frequency. RDS stations may alsoprovide the time of day, a program type
for current programming and the nameof the program being broadcast.
RDS features are available for use only
on FM stations that broadcast RDSinformation. RDS relies on receivingspecific information from these stationsand will work only when the informationis available.
See Section 3 of your Owner Manual.