4. Make sure the safety belt is not twisted, and
reconnect the center safety belt mini-latch to
the mini-buckle.
5. Pull on the safety belt to be sure the mini-latch
is secure.
Removing the Third Row Seats
1. Remove the cargo management system, if it is
in the vehicle. SeeCargo Management System
on page 164.
2. Make sure there is nothing on or under
the seat.
Notice:Folding a rear seat with the safety belts
still fastened may cause damage to the seat or
the safety belts. Always unbuckle the safety
belts and return them to their normal stowed
position before folding a rear seat.
3. Fold the seatback down. See Folding the
Seatback earlier in this section.
4. Remove the rear bolts located on the oor on
each side of the seat.
5. Remove the seat by tilting it slightly upward,
and then pulling it out of the rear of the vehicle
in one motion.
6. Put the bolts back into the holes on the oor so
the nuts do not get misplaced.
Installing the Third row Seats
1. Make sure the seatback is folded forward
before installing the seat. See Folding the
Seatback earlier in this section.
The seats must be placed in the proper
locations for the legs to attach correctly. The
wider seat must be installed on the driver
side and the narrower seat on the passenger
side. Make sure to remove the bolts from
the holes in the oor before installing
the seats.
2. Place the seat on the vehicle oor so that the
front seat hooks are on the vehicle bars.
3. Reinstall the bolts, and torque to 55
Y
(41 lb ft). Pull up on the seat to make sure
it is locked in place.
4. Raise the seatback to its upright position.
Push and pull on the seatback to make
sure it is locked into place.
5. Push the headrest up into position. Push and
pull on the headrest to make sure it is locked
into place.
23
Fabric/Carpet
Use a vacuum cleaner with a soft brush
attachment frequently to remove dust and loose
dirt. A canister vacuum with a beater bar in
the nozzle may only be used on oor carpet and
carpeted oor mats. For soils, always try to remove
them rst with plain water or club soda. Before
cleaning, gently remove as much of the soil
as possible using one of the following techniques:
For liquids: gently blot the remaining soil
with a paper towel. Allow the soil to absorb into
the paper towel until no more can be
removed.
For solid dry soils: remove as much as
possible and then vacuum.To clean, use the following instructions:
1. Saturate a lint-free, clean white cloth with
water or club soda.
2. Wring the cloth to remove excess moisture.
3. Start on the outside edge of the soil and gently
rub toward the center. Continue cleaning,
using a clean area of the cloth each time it
becomes soiled.
4. Continue to gently rub the soiled area until the
cleaning cloth remains clean.
5. If the soil is not completely removed, use a
mild soap solution and repeat the cleaning
process that was used with plain water.
If any of the soil remains, a commercial fabric
cleaner or spot lifter may be necessary. When a
commercial upholstery cleaner or spot lifter is to be
used, test a small hidden area for colorfastness
rst. If the locally cleaned area gives any
impression that a ring formation may result, clean
the entire surface.
After the cleaning process has been completed, a
paper towel can be used to blot excess moisture
from the fabric or carpet.
480
Light (cont.)
Highbeam On.......................................... 230
Malfunction Indicator................................ 226
Oil Pressure............................................. 229
Passenger Airbag Status Indicator............ 218
Passenger Safety Belt Reminder.............. 217
Safety Belt Reminder............................... 216
Security................................................... 229
StabiliTrak
®Indicator................................ 224
Tire Pressure........................................... 225
Tow/Haul Mode........................................ 230
Lighting
Delayed Entry.......................................... 187
Delayed Exit............................................ 188
Entry........................................................ 187
Parade Dimming...................................... 188
Lights
Exterior Lamps......................................... 183
Flash-to-Pass........................................... 176
High/Low Beam Changer......................... 176
Loading Your Vehicle................................... 361
Lockout Protection....................................... 108Locks
Delayed Locking...................................... 107
Door........................................................ 106
Lockout Protection................................... 108
Power Door............................................. 107
Programmable Automatic Door Locks....... 107
Rear Door Security Locks........................ 108
Loss of Control........................................... 344
Luggage Carrier.......................................... 162
Lumbar
Manual Controls......................................... 11
Power Controls.......................................... 12
M
Maintenance Schedule
Additional Required Services.................... 504
At Each Fuel Fill...................................... 508
At Least Once a Month............................ 508
At Least Once a Year.............................. 509
Introduction.............................................. 500
Maintenance Footnotes............................ 506
547
